Energetic, ecologic and fluid-dynamic analysis of a fluidized bed gasifier operating with sugar cane bagasse

This work aims to study the thermodynamic, ecological and fluid-dynamic aspects of a circulating fluidized bed gasifier using sugar cane bagasse as biomass, in order to estimate a model of its normal operation. In the initial stage was analysed the composition of biomass selected (sugar cane bagasse) and its lower heating value (LHV) was calculated. The energy balance of the gasifier was done, being the volumetric flow of air, synthesis gas and biomass estimated. Also the power produced by this gasifier was theoretically estimated. Then the circulating fluidized bed gasifier was designed for operation with approximately 100 kg/h of processed biomass. Cross-sectional area of the reactor, feeder size, diameter of the exit zone of the gases and minimum height of the expanded bed were selected. Some bed gasifier hydrodynamic factors were also studied. The minimum fluidization velocity, fluidization terminal velocity, and average fluidizing velocity were calculated, in order to understand the fluid-dynamic behaviour of gasification of this fuel. It was obtained a theoretical model that can support a possible prototype of circulating fluidized bed gasifier biomass. Finally, there were studied the ecological aspects of the gasifier, through an overall methodology. Ecological efficiencies were estimated for two scenarios: first considering the carbon cycle and thereafter disregarding the carbon cycle. In both cases, it can be proved the ecological viability of the project. © 2013 Elsevier Ltd. All rights reserved.

Use of slag/sugar cane bagasse ash (SCBA) blends in the production of alkali-activated materials

Blast furnace slag (BFS)/sugar cane bagasse ash (SCBA) blends were assessed for the production of alkali-activated pastes and mortars. SCBA was collected from a lagoon in which wastes from a sugar cane industry were poured. After previous dry and grinding processes, SCBA was chemically characterized: it had a large percentage of organic matter (ca. 25%). Solutions of sodium hydroxide and sodium silicate were used as activating reagents. Different BFS/SCBA mixtures were studied, replacing part of the BFS by SCBA from 0 to 40% by weight. The mechanical strength of mortar was measured, obtaining values about 60 MPa of compressive strength for BFS/SCBA systems after 270 days of curing at 20 °C. Also, microstructural properties were assessed by means of SEM, TGA, XRD, pH, electrical conductivity, FTIR spectroscopy and MIP. Results showed a good stability of matrices developed by means of alkali-activation. It was demonstrated that sugar cane bagasse ash is an interesting source for preparing alkali-activated binders. © 2013 by the authors; licensee MDPI, Basel, Switzerland.

Diurnal and nocturnal measurements of PAH, nitro-PAH, and oxy-PAH compounds in atmospheric particulate matter of a sugar cane burning region

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Incorporation of hydrogen production process in a sugar cane industry: Steam reforming of ethanol

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sugar cane vinasse in water bodies: Impact assessed by liver histopathology in tilapia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Correlation Between Apparent Activation Energy and NOx emission of renewable diesel from sugar cane, biodiesel, fossil diesel and their blends

Biofuels and their blends with fossil fuel are important energy resources, which production and application have been largely increased internationally. This study focus on the development of a correlation between apparent activation energy (Ea) and NOx emission of the thermal decomposition of three pure fuels: farnasane (renewable diesel from sugar cane), biodiesel and fossil diesel and their blends. Apparent Activation energy was determined by using thermogravimetry and Model-Free Kinetics. NOx emission was obtained from the European Stationary Cycle (ESC) with OM 926LA CONAMA P7/Euro 5 engine. Results showed that there is a linear correlation between apparent activation energy and NOx emission with R2 of 0,9667 considering pure fuels and their blends which is given as: NOx = 2,2514Ea - 96,309. The average absolute error of this correlation is 2.96% with respect to the measured NOx value. The main advantage of this correlation is its capability to predict NOx emission when either a new pure fuel or a blend of fuels is proposed to use in enginees.

Characterization of a wollastonite glass-ceramic material prepared using sugar cane bagasse ash (SCBA) as one of the raw materials

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mutagenicity profile of atmospheric particulate matter in a small urban center subjected to airborne emission from vehicle traffic and sugar cane burning

Atmospheric particulate matter (PM) is genotoxic and recently was classified as carcinogenic to humans by the International Agency for Research on Cancer. PM chemical composition varies depending on source and atmospheric conditions. The Salmonella/microsome assay is the most used mutagenicity test and can identify the major chemical classes responsible for observed mutagenicity. The objective of this work was to characterize the mutagenicity of PM samples from a countryside city, Limeira, Brazil, which is influenced by heavy traffic and sugar cane biomass burning. Six samples of total PM were collected. Air mass backward trajectories were calculated. Organic extracts were assayed using the Salmonella/microsome microsuspension mutagenicity assay using TA98, YG1041, and TA1538, with and without metabolic activation (S9). YG1041 was the most sensitive strain and mutagenicity reached 9,700 revertants per m(3) without metabolic activation. Potency for TA1538 was higher than TA98, indicating that this strain should be considered in air mutagenicity studies. The increased response to YG1041 relative to TA98, and the decreased response with S9, suggests that nitroaromatics are the major contributors. Limeira is among the most mutagenic cities in the world. High mutagenicity in Limeira seems to occur when the air mass from the area of sugarcane production is mixed with air from the region impacted by anthropogenic activities such as traffic. An increase in the formation of nitro-polycyclic aromatic hydrocarbons may result from longer contact time between the aromatic compounds and the atmosphere with high NOx and ozone concentration, although more studies are required to confirm this hypothesis. Environ. Mol. Mutagen., 2015. © 2015 Wiley Periodicals, Inc.

Raman Lidar monitors emissions from sugar cane fires in the State of São Paulo: a pilot-project integrating radar, sodar, aerosol and gas observations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Yield of different white button strains in sugar cane by product-based composts

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos do período e volume de aplicação na segurança dos tratoristas aplicando herbicidas na cultura de cana-de-açúcar (Saccharum spp.)

O objetivo deste trabalho foi avaliar os efeitos do período e volume de aplicação na segurança da atividade de tratoristas aplicando herbicidas na cultura de cana-de-açúcar com o pulverizador de barra montado em trator e a eficiência de equipamentos de proteção individual (EPIs) e de uma cabina acoplada ao trator. As exposições dérmicas de 13 condições de trabalho foram avaliadas e analisadas estatisticamente por meio do delineamento inteiramente ao acaso e do esquema fatorial 3 x 2 x 2 + 1. O fator A foi a condição de exposição: 1) exposição dérmica potencial (EDP) - sem nenhuma medida de segurança; 2) exposição com cabina no trator (Cabina); e 3) exposição com as vestimentas (EPI). O fator B foi o volume de aplicação: 1) 200 L ha-1 e 2) 100 L ha-1; e o fator C foi o período de aplicação: 1) diurno e 2) noturno. Como testemunha foi avaliada a EDP do tratorista aplicando na atividade usual de 300 L de calda ha-1, no período diurno. As exposições dérmicas (EDs) aos herbicidas considerados nessas condições de trabalho foram estimadas por meio de dados substitutos das EDs avaliadas ao cátion Cu+2 adicionado como traçador nas caldas aplicadas. O pulverizador utilizado foi do modelo PJ 600, com barra de 12 m de comprimento e 24 bicos de jato plano TT 110 04 ou TT 110 02. As 13 condições de trabalho avaliadas foram classificadas como seguras (MS>1) para o tratorista aplicando os herbicidas glyphosate (48% i.a.), MSMA (48%), diuron (46,8%) + hexazinone (13,2%), clomazone (50%), sulfentrazone (50%), ametryne (50%), diuron (50%), isoxaflutole (75%), metribuzin (48%), 2,4-D (80,6%), ametryne (30%) + clomazone (20%), ametryne (73,25%) + trifloxysulfuron (1,85%) e tebuthiuron (80 %) e inseguras para o herbicida atrazine (50%), nos dois períodos e nos três volumes de aplicação, e ametryne (50%), na aplicação diurna e 100 L de calda ha-1. As aplicações noturnas e os volumes de aplicação reduzidos tornaram as condições de trabalho mais seguras, exceto para o atrazine. A eficiência dos EPIs para a aplicação de 300 L ha-1 variou de 69,5 a 89,3%, e a da cabina do trator variou entre 76,4 e 83,3%, em relação aos volumes reduzidos de 100 e 200 L ha-1.

Dose de exposição radiométrica e composição das rochas sedimentares e ígneas na bacia do Rio Corumbataí (SP)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Elementos traço em material particulado atmosférico de uma região agroindustrial do sudeste do Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Use of U-isotope disequilibrium to evaluate the weathering rate and fertilizer-derived uranium in São Paulo state, Brazil

The U-disequilibrium method was utilized to evaluate the velocity of alteration of rocks and fertilizer-derived uranium in the Corumbatai River basin, São Paulo state, Brazil. The Corumbatai River basin is affected by the continuous use of fertilizer-derived uranium utilized in sugar cane crops, increasing the dissolved uranium concentration in the Corumbatai River (Santa Terezinha station) in the wet period to 43%. The weathering rate in the Corumbatai River basin utilizing the U-isotope modeling was 0.0265 mm/year (corresponding to 38,000 years to weather 1 m of rock under actual climatic conditions). However, when the inputs of anthropogenic uranium were considered, then a weathering rate of 0.022 mm/year (corresponding to 45,500 years to weather 1 m of rock) was determined. The removed material in the Corumbatai River basin is mainly from two sub-basins (the Cabecas River and Passa Cinco River), where the sandstones weather easier than the siltstones and claystones in the basin.