Geologia da região da Fazenda Salobo, Vazante - MG

Important deposits of Zn-Pb associated with the Vazante Group, and Au in Group Canastra occur in the Vazante-Paracatu region (MG). They are located in the Brasília Fold Belt, which was generated from a convergent tectonic in the Brasiliano cycle, forming a complex system of imbricated nappes and faults. This study aims to characterize stratigraphic, structural and metamorphic aspects of an area, located in the Salobo’s farm region. A geological mapping in 1:20,000 scale was executed in order to identify the outcropping lithotypes and to collect structural measures. Drill holes were described to support the surface data and samples were selected for the preparation of thin and polished sections. In this context, the occurrence of rock types and hydrothermal processes that had not been previously described were found, for example layers of phosphatic quartzite in the Serra do Poço Verde Formation (SPV), hydrothermal hematites from martitization magnetite in contact by detachment of the Serra do Garrote Formation and SPV in the Vazante Group and layers of microbanded iron formations in Paracatu Formation (Canastra Group). In the area, four deformational phases were recognized, occurring progressively, in which two of them are related to convergent tectonic, with the development of thrust faults, one is associated to tectonic escape and/or reactivation of basement faults and the last has a distensive character, representing the post-convergence relaxation. The metamorphism in the area was subgreenschist facies, reaching lower greenschist, with temperatures up to 350°C

Geologia e pesquisa mineral na região oeste do maciço Caritianas, municípios de Alto Paraíso e Itapuã D'Oeste, Rondônia

The granites Rondonianos, located in Rondônia Tin Pronvíncia, the southwestern portion of the Amazonian Craton, have great economic importance due to its large potential metallogenic. These granites stands out Intrusive Suite or Suite Granites Latest Rondônia Rondônia, with approximately 997-998 Ma (Bettencourt et al., 1997, 1999), for their tin mineralization having the largest reserves of this ore from Brazil. These tin mineralization in veins greissen are genetically related to these granites, deposits with different structural styles both within granitic plutons (endogreissen) as the host rocks (exogreissen). The western region of the Massif Caritianas has few published works, and the geology and potential econômicoão that were never fully known, now with the recovery of tin in the world market need new campaigns and prospective discoveries of new deposits

Estudo geoelétrico em ocorrência de manganês supergênico no município de Itapira (SP) por meio do método da eletrorresistividade

The geophysical methods are used as tools that, together with other data, assist in target detail and sizing of ore bodies. This paper presents the results of the application of DC resistivity geophysical method on a manganese mineral occurrence located in Itapira, in the northern portion of São Paulo state, hosted predominantly in schists and quartzits of Itapira Group. The integration of geophysical data resulted in the elaboration of electrical resistivity models, where it was possible observe that the mineralized body, composed predominantly of manganese oxides and hydroxides, has a pattern of high resistivity (above 5000 Ω.m) both surface and subsurface. The contrast with the host rock is characterized mainly by different minerals assemblages and by the presence of local groundwater. The results accomplished in this paper reveal that the application of DC resistivity method is valid in primary evaluations of supergene deposits

Caracterização mineralógica, petrológica e química da sulfetação nos reef's da mina Canavieiras, Jacobina, Bahia

In the Serra de Jacobina, localized in the North Central portion of the state of Bahia, occours the Jacobina Group. It’s a sedimentary basin and the gold deposit is stocked on the basal portion, which consist on quartzites intercalated with oligomítico metaconglomerates of Serra do Córrego Formation. There are controversies about the origin of the gold mineralization, but the currently most accepted hypothesis corresponds to a paleoplacer deposit with subsequent ore remobilization and concentration by hydrothermal process. The sulphidation is one of the main results of hydrothermal process, which was more detail characterized, besides identifying if there was more than one sulfides phase generation and its relationship with gold mineralization. The analyzes were performed from the main reef's (metaconglomerates mineralized levels) of Mine Canavieiras: Maneira, Holandez, Liberino, Piritoso, MU and LU. Chemical analyzes semi-quantitative were developed with EDS in MEV and also petrographics analyses. The main sulfide is pyrite, followed by chalcopyrite. Six groups of pyrite were classified according with chemical composition, however they show similarities in their habit and occurrence. Were identified four types of chlorite, labeled A, B, C, D. Gold occurs in free form, associate to pyrites, to Fe-Ti-Muscovite, to chlorite type B and to microfractures with iron hydroxide. Gold presents three different compositions: pure, with Ag or associated with U-Zr. The results of chemical analysis showed that the hydrothermal process have as their main source, ultramafic rocks present in the Jacobina Basin

Mapeamento geológico e petrologia dos complexos máfico-ultramáficos de Mangabal Sul e Mangabal Norte, região de Sanclerlândia, Goiás

The Mangabal Sul and Mangabal Norte mafic-ultramafic complexes are interpreted as intrusive stratiform bodies in the Goiás Magmatic Arc during the Brazilian cycle, being economically important for harboring significant amounts of nickel and copper sulfides. The main lithotypes of the complexes are gabbronorites, olivine gabbronorites, pyroxenites and peridotites, with variated degrees of deformation, recrystallization and metamorphism superimposed, with metamorphic peak of amphibolite to granulite facies evidenced mainly by the occurrence of coronitic olivine in metamafic rocks and the occurrence of syn-kinematic retrometamorphism associated with the development of the main foliation Sn. The Sn foliation planes show NE-SW preferential direction, consistent with the foliation direction of VIII the enclosing gneisses and schists, also concordant with the general elongation of mafic and ultramafic bodies displayed on map. The sulfide phase presents textures that indicate remobilization, associated with the occurrence of significant amounts of rutile within the ore which reinforces this idea. Along with the sulfides, the occurrence of expressive quantities of titanium oxides such as ilmenite and rutile, make the area more economically attractive. It can be suggested that the Mangabal Norte and Mangabal Sul complexes are contemporary, have the same genetic affinity and suffered the same deformational and metamorphic processes, evidenced by their structural and petrological similarities

Produção de carvão vegetal a partir da madeira de Eucalyptus saligna clone SI70 com tres anos e meio de idade

Charcoal is obtained from carbonization, much used in the steel industry for ore reduction, using as raw material the Eucalyptus. The present study aims to verify whether the main Eucalyptus saligna genetically modified produce quality charcoal with only 3.5 years old. The study was done with material collected from three trees, divided into five discs removed at 0, 25 , 50 , 75 and 100 % of the commercial height of the tree. The procedures adopted were based on standards published by ABNT. The results were satisfactory for the parameters: basic wood density with an average of 0.39 ± 0.0082 g / cm ³; volatile materials from coal with an average of 19.35 ± 3.27 %, fixed carbon content of the coal with an average of 75.62 ± 3.40 % and gross calorific value of coal with an average of 4694.43 cal / g, and unsatisfactory results for ash content averaging 5.03 ± 0.23 when compared to the values found in the literature. It was concluded that the studied wood is able to produce charcoal, but the factors of production should be better observed, such as heating time which exerted direct influence on the determination of ash content

Análise estrutural e microtectônica da inflexão do jordino e depósitos de ouro associados no greenstone belt de Pilar de Goiás

The study area is included in the geological context of the Goias Median Massif, a region where there are associations of Archean granite-gneiss complex (Block Moquém) and a Paleoproterozoic metavolcano-sedimentary sequence ( Pilar greenstone belt ). At the south of area, the greenstone sequence is partially overlain by Neopreoterozoic metasediments of the Araxá Group. The lithostratigraphic units of the Pilar greenstone belt define a shift from about N30W direction (north of the deposit) to N60 and 70W in the region south of the Jordino deposit, where are truncated by the Araxá Group rocks. Mineralogical associations described in this paper allow to indicate that the regional metamorphism that affected the rocks of the greenstone belt and Araxá Group, in the mapped area, reached the upper greenschist facies (garnet zone). Data obtained during mapping and by microtectonics analysis allow to indicate the existence of at least four deformational events that acted on the rocks of the Guarinos greenstone belt and Araxá Group, represented by the phases called Dn-1, Dn, Dn + 1 and Dn+2. It was observed that the pattern of sulphide porfitoblasts in mineralized levels is similar to garnet, biotite and muscovite porfiroblasts (tardi to post Dn) that marks the metamorphic peak of the area

Análise de causas de trincas em carro de translação de empilhadeira/recuperadora

The present work aims to study the possible causes of cracks founded and recovered in translation cars of ore Forklift / ore Reclaimer. To identify the possible causes of cracks observed on the equipment it was used a static approach analysis, using a finite element method as an analysis tool, using a specific structural analysis program. After making the model, a strain gage measurement was necessary because there may be significant amounts of masses of non-structural components that were not modeled and were not available in the drawings, as well as fouling ore. With the calibrated model it was processed analyses with the load cases of dead load, product, wind and excavation. After the processing, it was observed that none of these load cases resulted in values that caused the crack, so another three hypotheses were tested: depression and misalignment, jacking and translation of only three cars. Of these three hypotheses it was observed that the jacking coud be the cause of the cracks, because the distribution of stress. Due to the miss of parameters, like the height utilized in this process, it was not possible to affirm the real stress level

Territórios, multiterritorialidades e memórias dos povos Guarani e Kaiowá: diferenças geográficas e as lutas pela Des-colonização na Reserva Indígena e nos acampamentos-tekoha - Dourados/MS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização mineralógica e química das fontes de poeira e sua influência na atmosfera da região do polo cerâmico de Santa Gertrudes (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização geofísica no Gabro Santa Catarina, São Sepé (RS)

Geophysical methods are widely used in mineral exploration for several types of mineral deposits. When combined with direct studies as geochemistry, a substantial increase in the probability of ore discovery is possible in mineral exploration activities. Electrical geophysical methods are particularly promising in studies related to the search of sulphides due to the contrast of physical properties electric resistivity and chargeability. This paper presents the results obtained from the application of Resistivity (DC) and Induced Polarization methods, through the electrical profiling technique, aiming at evaluating the potential mineral of a gabbro intruded in a metasedimentary sequence, in an area where several occurrences of gold and copper were described. This gabbro is ranked on the Basic-Ultrabasic stratiform bodies, which gather peridotites, gabbros, and layered anortosites. Three radial lines of electrical profiling were performed, spaced of 60° and crossing at the area center, with readings of electric resistivity and chargeability in Wenner-Schlumberger array. The association of low resistivity and high chargeability areas has allowed defining potentially mineralized zones related to structures that condition the drainage net in the gabbro domain. Grains of gold detected through geochemical prospection of alluvial sediments dowstream from the gabbro may have originated from leaching of ores deposited in fractures through the action of river waters within the gabbro domain, possibly consisting of sulphides and gold.

Tipo de cimentação em materiais duros do perfil de alteração da mina de fosfato da Anglo American, Catalão-GO

One of the main challenges in the mining sector at present, related to the optimization of mineral assets, consists in to find the best proportion of each geological material to be mined and homogenized to ensure high productivity and stability in ore processing plants. The stability of a mineral processing plant is factor for achieving operational excellence, as a stable performance of the plants ensures economy and adherence to financial planning businesses. Is already well Know that the feed rate of the processing plants is dependent on the hardness and quality of the ore. Therefore, the ore behavior predictability is the solution to ensure the stability of mineral processing plants. This work was developed in Anglo American Phosphate Brazil Ltda., at the Fazenda Chapadão Phosphate Mine, located in the southeastern portion of the state of Goiás, in the municipalities of Catalão and Ouvidor. The phosphate ore is the result of supergene apatite concentration in the weathering profile of the alkaline ultramafic phlogopitized rocks, intruded by foscoritic and carbonatitic rocks series. The weathering profile has about 100 meters thick and is divided into three basic types, from top to bottom, coinciding with decreasing intensity of weathering: oxidized ore, micaceous ore and weathered rock. In each portion of this weathering profile, mainly near the contacts between these three divisions, are hard materials, cemented by minerals such as apatite, quartz, goethite, monazite and barite. The different features presented by these materials makes to be vital the correct identification, quantification and location of different hard materials in the mine area, to maximize its use. The main objective of this study was to define the type of cementation of hard materials which predominates in each portion of the weathering profile in the mine, as well as their relationship with the protolith. The work involved geological mapping, channel sampling...

Caracterização geofísica e geológica das formações ferríferas do Grupo Macaúbas - MG

Pós-graduação em Geologia Regional - IGCE

Petrografia e geoquímica das rochas metacarbonatíticas do Complexo Angico dos Dias, divisa Bahia/Piauí, Brasil

Pós-graduação em Geociências e Meio Ambiente - IGCE

Dissolução redutiva de minério de ferro por Acidithiobacillus ferrooxidans para a recuperação de metais de interesse econômico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)