Short-term cycles of feed deprivation and refeeding promote full compensatory growth in the Amazon fish matrinxa (Brycon amazonicus)

Developing nutritional strategies that can reduce production costs for the fish industry without affecting productive performance is paramount to make the activity sustainable. We investigated if short-term cycles of feed deprivation and refeeding elicit compensatory growth in matrinxa (Brycon amazonicus) juveniles, using three feeding protocols for 60 days (Phase 1): two levels of deprivation (feed deprivation for two days and refeeding for three - D2R3, or four days - D2R4) and a control level (daily feeding). Following, all fish groups were fed daily at satiation for 15 days (Phase 2). At Phase 1, matrinxa achieved full compensatory growth in both deprivation levels by increasing feed intake and feed efficiency. Overall, deprived fish consumed 40% (D2R3) and 36% (D2R4) less feed than fish fed daily. In Phase 2, growth was similar for all fish. Feed intake increased in both deprived fish, but feed efficiency did not differ among groups and was lower than in Phase 1, indicating a reduced efficiency in feed utilization when food was freely available. We propose that intermittent cycles of feeding represent an effective means to reduce production costs. (C) 2014 Elsevier B.V. All rights reserved.

Bainitic precipitation in the Cu-9 wt.%Al-4 wt.%Mn-5 wt.%Ag alloy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physiological Response to Dolops carvalhoi (Crustacea: Branchiura) Infection by Pacu, Piaractus mesopotamicus, Subjected to Short Cycles of Food Restriction and Refeeding

Feeding strategies that reduce feed and promote compensatory growth could be an interesting tool to reduce costs in the fish production. However, fish health must be monitored to evaluate if their physiological response to adverse conditions, such as parasite infection, does not become compromised. A 12-wk growth trial was conducted to determine the physiological responses of pacu, Piaractus mesopotamicus, that were subjected to different fasting/refeeding cycles and infected with the Dolops carvalhoi. The schemes were: (i) control group fish (FD), (ii) food-restricted and controlled refeeding group (FR/Rc), and (iii) food-restricted and refeeding to satiation group (FR/Rs). After 84 d, the fish were exposed to D. carvalhoi for 30 h. The fish subjected to food restriction did not exhibit compensatory growth. Cortisol levels decreased in all groups within 30 h after infection. Glucose levels increased 6 h after the D. carvalhoi in the FR/Rs and 30 h after infection in the FD. In all of the fish groups, the hematocrit values were reduced after infection, and it was associated with a reduction in the mean corpuscular volume and erythrocytes. At 30 h after infection, the number of erythroblasts increased. The use of the feeding schemes does not indicate a failure of the pacu physiological responses.

Lê Cycles and Milnor Classes of Compact Hypersurfaces

We determine the relation amongst the global Lê cycles and the Milnor classes of analytic hypersurfaces defined by a section of a very ample line bundle over a compact complex manifold. The key point is finding appropriate expressions for the global Lê cycles and for the Milnor classes in terms of polar varieties. Our starting points are an interpretation of the Lê cycles given by T. Gaffney and R. Gassler, a formula by A. Parusinski and P. Pragacz for the Milnor classes via McPherson’s functor, and a conjecture of J.-P. Brasselet, that we prove, stating that Milnor classes can be expressed in terms of polar varieties. We then use the work by R. Piegne for Mather classes, by J. Schürmann and M. Tibăr for MacPherson’s classes for constructible functions, and by D. Massey for an extension of the local Lê cycles for constructible sheaves.

Reuse of Cyclodextrin Glycosyltransferase through Immobilization on Magnetic Carriers

National Council for Scientific and Technological Development (CNPq)

Effect of thermal and mechanical cycles on the hardness and roughness of artificial teeth

In this study the effects of thermal and mechanical cycles on the hardness and roughness of artificial teeth were evaluated. Materials and Methods:Specimens were prepared and stored in distilled water at 37ºC for 48 hours (n=10).The hardness and roughness readings were made in the following time intervals, according to each group:G1: after specimen storage in distilled water at 37°C for 48 hours; G2: after 600.000 constant mechanical cycles; G3: after 1.200.000 constant mechanical cycles; G4: after 2.500 thermalcycling baths, alternated between hot water (55°C) and cold water (5°C) and G5: after 5.000 thermalcycling baths, alternated between hot water (55°C) and cold water (5°C). After cycling and storage procedures, the specimens of each group were submittedto surface roughness and hardness readouts. Statistical evaluation was performed by three-way analysis of variance, complemented by the Tukey multiple comparisons of means test. The level of significance adopted was 5%. There was no significant difference between G1, G4 and G5 as regards mean roughness of different brands of artificial teeth. Groups G2 and G3 showed higher mean roughness values, and generally equivalent values in all time intervals, except for Trilux (G3> G2). Significant differences in hardness values were observed in different brands of artificial teeth, and differences in values after thermal and mechanical cycling. In conclusion, our findings suggest that thermal cyclingdid not change the roughness of the artificial teeth tested, but after the mechanical cycling the roughness values increased. Thermal and mechanical cycling influenced the hardness of the artificial teeth tested.

On the number of limit cycles in discontinuous piecewise linear differential systems with two pieces separated by a straight line

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the Limit Cycles for a Class of Continuous Piecewise Linear Differential Systems with Three Zones

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spatial distribution of the daily precipitation concentration index in Algeria

In this paper, the spatial and temporal distribution of the daily precipitation concentration index (CI) in Algeria (south Mediterranean Sea) has been assessed. CI is an index related to the rainfall intensity and erosive capacity; therefore, this index is of great interest for studies on torrential rainfall and floods. Forty-two daily rainfall series based on high-quality and fairly regular rainfall records for the period from 1970 to 2008 were used. The daily precipitation CI results allowed the identification of three climate zones: the northern country, characterized by coastal regions with CI values between 0.59 and 0.63; the highlands, with values between 0.57 and 0.62, except for the region of Biskra (CI = 0.70); and the southern region of the country, with high rainfall concentrations with values between 0.62 and 0.69.

Interaction between recrystallization and strain-induced precipitation in a high Nb- and N-bearing austenitic stainless steel: influence of the interpass time

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Re-analysis of pluvial precipitation in southern Brazil

This study examined precipitation in southern Brazil based on a data set provided by the Brazilian National Water Agency, covering the period from 1976 to 2010. Data were homogenized using the R software and the Climatol subroutine, which allow completing missing data. Isohyets were drawn using the Geostatistics software to obtain a semivariogram for each analysis. There was a remarkable interannual variability in this region, with positive anomalies in the warm phase (El Nino) and negative anomalies in the cold phase (La Nina) of ENSO. Also, the responses of this variability were not uniform in the entire region, since there was variability from year to year and from event to event.

Effect of trimetaphosphate and fluoride association on hydroxyapatite dissolution and precipitation in vitro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of silent period on masticatory cycles of different muscles in dentate oral contraceptives users and nonusers

The aim of this study was to evaluate the influence of oral contraceptive use on the silent period (SP) of anterior temporal and masseter muscles during the menstrual cycle. Totally, 28 women on reproductive age were selected including 15 nonusers of any hormone and 13 contraceptive users. All patients were dentate without muscular temporomandibular disorders. Electromyography (SP test) of the anterior temporal and masseter muscles was conducted every week during three consecutive menstrual cycles at 1(st) day of menstruation (P1), 7(th) day (P2), 14(th) day (P3) and 21(st) day (P4). The SP values in the anterior temporal and masseter muscles were measured at both sides. The SP values of the right side (13.49 ms) at P2 were significantly different compared to the left side (12.28 ms). However, there was no significant difference on the interactions among the three factors. It can be concluded that the SP values in healthy women in reproductive age may not be influenced by the menstrual cycle with similar results for both muscles.

Spatial intra-annual variability of precipitation based on geostatistics. a case study for the Paraiba do Sul Basin, southeastern Brazil

The emphasis in this research is to evaluate the spatial distribution of the precipitation using a geostatistics approach. Seasonal time scales records considering DJF, MAM, JJA e SON periods performed the analysis. Procedures to evaluate the variogram selection and to produce kriging maps were performed in a GIS environment (ArcGIS®). The results showed that kriging method was very suitable to detect both large changes in the whole area as those local small and subtle changes. Kriging demonstrated be a powerful statistical interpolation method that might be very useful in regions with great complexity in climatology and geomorphology.

Influence of the number of load cycles to obtain the stiffness properties of angico preto (Anadenanthera macrocarpa) wood specie

The tests used to obtain the stiffness properties of wood are made with two loading cycles, as defined by the Brazilian standard ABNT NBR 7190 (Design of Timber Structures). However, the possibility of reducing the number of cycles allows decrease the operating time of the machine, resulting in reduced spending on electricity used during the tests. This research aimed to investigate, with the aid of the analysis of variance (ANOVA), the influence of the use of three load cycles to obtain the modulus of elasticity in compression parallel to grain (Ec0), in tensile parallel to the grain (Et0), in bending (Em) and in compression perpendicular to the grain (Ec90) of Angico Preto (Anadenanthera macrocarpa) wood specie. For the number of cycles and stiffness were manufactured 12 samples, totaling 144 specimens. The results of the ANOVA revealed statistical equivalence between the stiffness properties for both load cycle numbers evaluated, indicating that it is possible to carry out the tests with a single charge cycle, allowing savings in time and energy in the operation of the equipment.