Body Composition and Net Energy Requirements for Maintenance of Non-Castrated Water Buffaloes (Bubalus bubalis)

The research aimed to estimate body contents of protein and energy and net requirements of energy for maintenance of buffaloes, slaughtered at different stages of maturity. There were used 14 Mediterranean intact males with initial average body weight of 352.2 +/- 24.3 kg and average age of 24 months. The animais were randomly divided into four experimental groups. One group was designed to slaughter at the beginning of the experimental period (IS). The animals of another group were restricting fed, receiving, individually, levels of protein and energy 15% above maintenance (RF). The animals of the two remaining groups were individually fed ad libitum (SW450 and SW500) to reach weights corresponding to 100 and 110 percent of the mature weight of the buffalo cows (respectively 450 and 550 kg). The ration contained ground-corn cobs, soybean meal, urea, minerals, and signal-grass (Brachiaria decumbens) hay, with a concentrate: roughage ratio of 50: 50 and 13% of crude protein on a dry matter basis. To estimate changes in body composition inside the range of weights included in the trial, linear regression equations of log protein (kg), fat (kg) and energy (Mcal) as a function of log empty-body-weight (EBW), in kg, were fitted. Energy requirements for maintenance were obtained as estimated heat production at zero level of energy intake. Buffaloes submitted to fattening in feedlot presented early body fat deposition, and had with the same live weight lower protein content and higher fat content and energy per unit weight than european-zebu crossbred cattle.

Acute aerocystitis in Nile tilapia bred in net cages and supplemented with chromium carbochelate and Saccharomyces cerevisiae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Energy and hydraulic efficiency in conventional water supply systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Stocking densities of juvenile Brycon orthotaenia: production parameters and economic benefits in net cages

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Light emitting diode (LED) use in artificial lighting for broiler chicken production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização da mínima quantidade de lubrificante (MQL) com água no processo de retificação cilíndrica em cerâmica avançada com rebolo de ligante resino cerâmico/metálico

Pós-graduação em Engenharia Mecânica - FEB

Estudo sobre a utilização de energia solar no Brasil para uso residencial

Pós-graduação em Engenharia Elétrica - FEB

Estudo do comportamento de discos abrasivos, em operações do tipo Cut-off por mergulho basculante, submetidos à diversas condições de corte sem lubrificação

O corte de aços por disco abrasivo é um dos processos que apresentam as melhores características de economia, eficiência e rapidez, e ainda hoje é muito utilizado no meio industrial se comparado a outros processos tradicionais de corte como o cisalhamento (tesourão), torneamento (sangramento), serragem com serras metálicas, serragem por atrito com lâminas circulares sem dentes e chama oxi-acetileno. Da literatura formal mais recente, nota-se que durante os últimos anos as máquinas para a realização dos cortes foram inovadas. Entretanto, esta atenção não foi dada à ferramenta de corte abrasiva. A falta de literatura técnica dificulta a escolha das condições de corte e da sua otimização no meio industrial. Este fato é agravado pela grande diversidade de discos abrasivos disponíveis no mercado, com diferentes qualidades e preço. As decisões sobre as condições de corte são baseadas em experiências pessoais, sem critério definido, e freqüentemente desprezam os aspectos de segurança inerentes ao processo. A concorrência estrangeira, através da globalização da economia, está obrigando as indústrias nacionais a atenderem os padrões internacionais de qualidade e desempenho. Uma forma das indústrias nacionais tornarem-se mais competitivas é através do conhecimento detalhado das operações de corte com discos abrasivos. Neste trabalho é apresentado um estudo sobre o comportamento de discos abrasivos, submetidos a diversas condições de corte. Os resultados são discutidos em função da análise da velocidade de corte, velocidade de mergulho do disco abrasivo na peça, força tangencial de corte média, tempo de corte e relação G.

Lysine in the diet of Rhamdia voulezi male broodstocks confined in net cages

The focus of this study was to evaluate the effect of lysine on the productive (weight and length gain, apparent feed conversion, specific growth rate and condition factor) and reproductive performance of Rhamdia voulezi males confined in net cages during the first reproductive cycle. The following parameters were assessed: seminal parameters (motility rate and duration, survival, sperm concentration, morphology, pH and osmolarity), hormonal parameters (cortisol and testosterone), testicular tissue (histomorphology), organosomatic indices (gonadosomatic, hepatosomatic and viscerosomatic indices) and composition of essential amino acids, crude protein and moisture of whole carcass. Four hundred fish were used, distributed in a random experimental design with four treatments and four replications in 16 net cages with 25 fish each. The treatments consisted of four different diets prepared so as to contain the following levels of lysine: 1.20, 1.40, 1.60 and 1.80%, with 30% crude protein and 3500 kcal kg(-1) digestible energy for 185 days (Jul./12-Jan./13). Eighteen males were selected per treatment, and they all released semen after slight abdominal pressure. The males were weighed, measured, submitted to hypophysation (2.5 mg kg(-1) carp pituitary extract), and then had their semen and blood collected. The fish were sacrificed by cervical dislocation, dissected, and the testes, liver, fat and guts were removed and weighed. The effects (p < 0.05) for the means of final weight, weight gain, apparent feed conversion and condition factor were observed for the analysis of productive performance. With regard to the reproductive parameters, only the seminal volume was affected (p < 0.05). Thus, the levels of testosterone showed quadratic effect (p < 0.05). The anatomy and the histomorphology of the testes were similar between the treatments during the spermiation period. With regard to the organosomatic indices, there was no influence (p > 0.05) between the treatments. The amino acids in the carcass were not affected (p > 0.05). The increment of lysine in the diet provided linear increase for weight gain and seminal volume and linear decrease for feed conversion in R. voulezi broodstocks confined in net cages. (C) 2014 Elsevier B.V. All rights reserved.

Partitioning the net effect of host diversity on an emerging amphibian pathogen

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A NEURAL NET FOR EXTRACTING KNOWLEDGE FROM NATURAL-LANGUAGE DATA-BASES

The present paper introduces a new model of fuzzy neuron, one which increases the computational power of the artificial neuron, turning it also into a symbolic processing device. This model proposes the synapsis to be symbolically and numerically defined, by means of the assignment of tokens to the presynaptic and postsynaptic neurons. The matching or concatenation compatibility between these tokens is used to decided about the possible connections among neurons of a given net. The strength of the compatible synapsis is made dependent on the amount of the available presynaptic and post synaptic tokens. The symbolic and numeric processing capacity of the new fuzzy neuron is used here to build a neural net (JARGON) to disclose the existing knowledge in natural language data bases such as medical files, set of interviews, and reports about engineering operations.

RESPONSE OF CORN GROWN IN TILLAGE SYSTEM FOR THE APPLICATION OF NITROGEN DOSES IN A SEQUENCE OF PLANT COVER

The use of cover crops can produce large amounts of biomass, improving the cycling of nutrients, particularly nitrogen, promoting productivity gains and cost savings. Given this, the objective was to evaluate the use of N rates associated to cover crops grown in pre-harvest nutritional status, nitrogen accumulation and corn yield in both years. The experiment was conducted in an Oxisol with maize, no-tillage system. The experimental design was a randomized block, split plot with four replications. The main treatments were: six cropping systems (sun hemp, jack bean, lablab, millet, and velvet bean fallow) in secondary treatments: four doses of nitrogen (0, 60, 120 and 180 kg ha(-1) N). Corn yield was not affected by the type of coverage for pre-season, regardless of the nitrogen applied in the soil. Still, the use of nitrogen fertilizer in the soil promotes gains in grain yield in the first year of cultivation, regardless of the type of coverage in pre-season. In the first year (2006/2007) the species of coverage produced more biomass were velvet bean, jack bean, sun hemp and lablab, while in the second year (2007/08) were the sun hemp, millet, lablab, jack bean and velvet bean, respectively.

Medidores inteligentes: o primeiro passo em direção as redes inteligentes

Smart grids are the focus of major study today because of the necessity of modernization in electrical systems and reduction of greenhouse gas emissions that increases global warming. Reaching the best deployment method, you must first of all know the current electrical system and how to use them for the benefit of this new technology. Preparing the action plan we should be aware of the main points of smart grids in each step of the electricity system - generation, transmission and distribution. Analyzed these topics, this work will focus on the first step in the implementation of the smart grids: the smart meters, tool which is already being implemented in Brazil. The main characteristics and applications of these devices, as well as their communication structure with the core distributors will be showed during the paper. Finally, we present a case study which will be discussed and analyzed based in the results obtained with the implementation of smart meters in the city of Vancouver, Canada, where we have a considerable savings already in the first year, with fully paying the initial investment and still have a profit

Utilização de 5S, Kanban e Layout para a melhoria do controle de estoque em um varejo de materiais para construção

Many small businesses suffer from a lack of control of goods stored. This lack of control affects other areas of the company as purchase, that can’t buy material in an advanced and accurated way. It also affects services provided by the company, especially when it is a store because for sell something it is necessary to have the material in the right time. Futhermore, the business isn’t able to identify obsolete items in stock, theft and vandalism, loss or damage to materials. All of these disorders can be converted into financial losses that make much difference to a small business that needs to remain competitive in the market facing the giants while generating a profit that allows it to invest in their growth. Therefore, any unnecessary expense is exceedingly harmful and any savings already differentiates it from other companies of similar size. This study deals with the application of production engineering tools as 5S, kanban and layout in a building materials retail to tackle problems that prevent this company to have a stock organized and accurated. Finally, we recorded gains that the company reached with the implementation of part of the solution proposed

Cidades sustentáveis: análise comparativa com cidades contemporâneas

Currently the world is under an energy revolution, every day more technologies are developed in order to better use the energy for having better energy efficiency of equipment and processes with minimal environmental degradation. Taking into account that thousands of people live in built environments in the context of cities and that the energy flow to this location is significant, it is important to study the built environment as a potential source of savings, energy recovery and regeneration, because cities are the major bottlenecks energetic. Therefore, this study aimed to examine and to list the most important and promising technologies to be used in the built environment to collect or save energy that would be wasted, such as clothes that generate energy through movement or solar incidence, facades of buildings that generate energy due to solar radiation, fitness centers that produce electricity due to the rotation used in fitness equipment for athletes, elevators that take advantage of the potential energy or use it more rationally, generators that take advantage of energy vibrational, and finally more sustainable vehicles with higher performance and less degrading the environment. The information and results obtained from this study show that the technologies used to harness energy before lost are increasingly evident and also is increased the progress relative to the energy use in a urban context. In the closure, a comparison of energy expenditure between a city that uses some of these sustainable technologies and another of the same size with conventional habits is presented