Color stability of composites: effect of immersion media.

Coloring in drinks decreases the color stability of composite restorations, reducing their longevity. The purpose of this in vitro study was to evaluate the effect of immersion media on color stability of seven different composite resins (Solidex - Shofu, Resilab-Wilcos, Signum - Heraeus, Epricord - Tokuyama, Adoro - Ivoclar Vivadent, Admira - Voco and Sinfony - 3MESPE). Seven resin-based composite specimens were prepared using a cylindrical teflon mold 2 mm thick and 10 mm in diameter Fifteen specimens of each resin were light-cured according to manufacturers' instructions and randomized into 3 groups (n= 5) according to immersion media: coffee, cola beverage and water A digital spectrophotometer Easy Shade (VITA) was used to evaluate the color changes at baseline and 7 days after immersion in each solution. Specimens were stored in the different staining media for 24 h/day during one week. The color differences were analyzed by two-way ANOVA and Tukey 's test (p< 0.05). Color change was observed after one week of immersion and there were statistical differences in staining, composite and interaction factors. The least staining was observed in Admira (deltaE= 3.934+/-0.814) and Resilab (deltaE= 3.993+/-0.735), followed by Adoro (deltaE= 4.044+/-1.001), Epri-cord (deltaE= 4.049+/-1.234), Signum (deltaE= 4.260+/-1.785), Solidex (deltaE=5,122+/-0.534) and Sinfony (deltaE=5.126+/-0.838). All of the composites tested except Adoro were susceptible to staining by substances present in coffee and cola, when stored in beverage for seven days. The lowest deltaE means were obtained with Admira.

Attractiveness and oviposition preference of Glycaspis brimblecombei Moore in Eucalyptus spp.

The red gum lerp psyllid Glycaspis brimblecombei Moore (Hemiptera: Psyllidae) was first recorded in Brazil in 2003 and since then has caused serious damage in Eucalyptus forests. The damage is mainly due to defoliation, sooty mold and dieback, thus requiring the development of efficient management strategies. The settling and ovipositional preference of G. brimblecombei by species and clones of Eucalyptus were evaluated in free- and no-choice tests. Preliminary tests were done to determine the density of psyllid couples that produced the greatest densities of eggs, leaf position selection for oviposition, and whether oviposition was affected by preimaginal conditioning. Apical leaves were used more frequently for oviposition by the psyllid, and the number of eggs decreased from the apex to the base. The densities of 10 and 15 psyllid couples per seedling produced the highest oviposition. There was no evidence of preimaginal conditioning. In the free-choice test, E. grandis, E. urophylla, VM-1, I-144, C-219 and H-13 were less attractive to G. brimblecombei adults, with H-13, E. grandis and E. urophylla having the least oviposition. In the no-choice test, E. urophylla, GG-100 and E. grandis also demonstrated a lower oviposition, but E. camaldulensis and 3025 were highly susceptible. The low preference for the genotypes E. grandis and E. urophylla suggests the occurrence of a non-preference type resistance against the red gum lerp psyllid. Our results can be utilized for the development of management programs for G. brimblecombei in Eucalyptus forests. © 2012 Springer Science + Business Media B.V.

Degree of conversion of polymer-matrix composite assessed by FTIR analysis

Aims and objectives: The behavior of polymer-matrix composite is dependent on the degree of conversion. The aim of this study was to evaluate the degree of conversion of two resin cements following storage at 37°C immediately, 24 and 48 hours, and 7 days after light-curing by FTIR analysis. Materials and methods: The specimens were made in a metallic mold and cured with blue LED with power density of 500 mW/cm2 for 30 seconds. The specimens were pulverized, pressed with KBr and analyzed with FTIR following storage times. Statistical analysis used: ANOVA (two-way) and Tukey's post hoc. Results: To the polymer-matrix composites between 24 and 48 hours does not show a significant increase (p > 0.05), however, the highest values were found after 7 days. Conclusion: The polymer-matrix composites used in this study showed similarity on the degree of conversion and increased of according to the time of storage.

Controle em pós-colheita de Penicillium digitatum em laranja-pera com microrganismos e tratamento térmico

The consumer market demands food without pesticide residues. Therefore, this study focused on evaluating the control of green mold in Pera orange trees with biocontrol agents (Bacillus subtilis, Bacillus licheniformis and Bacillus subtilis (QST 713)), associated or not with heat treatment. The fruit was obtained in packinghouse before processing, being washed and disinfected with the use of Sodium Hypochlorite. Fruits submitted to these treatments were stored from 11 to 28 days at temperature of 10 °C and RH 90%±5 or for eight days at 20 °C and 90%±5. In general, the heat treatment reduced the disease severity determine by the area under the disease progress curve in the fruit and the incidence of natural postharvest disease in Pera oranges. On the other hand, biocontrol agents did not control the disease, showing that the organisms tested did not present curative activity against the green mold.

Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic

Objective. To evaluate the surface roughness of IPS Empress 2 ceramic when treated with different finishing/polishing protocols. Materials and methods. Sixteen specimens of IPS Empress 2 ceramic were made from wax patterns obtained using a stainless steel split mold. The specimens were glazed (Stage 0-S0, control) and divided into two groups. The specimens in Group 1 (G1) were finished/polished with a KG Sorensen diamond point (S1), followed by KG Sorensen siliconized points (S2) and final polishing with diamond polish paste (S3). In Group 2 (G2), the specimens were finished/polished using a Shofu diamond point (S1), as well as Shofu siliconized points (S2) and final polishing was performed using Porcelize paste (S3). After glazing (S0) and following each polishing procedure (S1, S2 or S3), the surface roughness was measured using TALYSURF Series 2. The average surface roughness results were analyzed using ANOVA followed by Tukey post-hoc tests (α = 0.01) Results. All of the polishing procedures yielded higher surface roughness values when compared to the control group (S0). S3 yielded lower surface roughness values when compared to S1 and S2. Conclusions. The proposed treatments negatively affected the surface roughness of the glazed IPS Empress 2 ceramic. © 2013 Informa Healthcare.

Anatomia topográfica e comportamento arterial do pâncreas em cágados Trachemys scripta elegans (wied, 1838)

The turtle Trachemys scripta elegans popularly known as American tiger water are native regions winged Florida and Mississippi, in the United States. We used twenty (20) turtles (Trachemys scripta elegans), adult males and females, which were euthanized under Resolution 714 of June 20, 2002 the Federal Council of Veterinary Medicine (CFMV). After euthanasia were identified aortas right and left to the injection of Neoprene latex 450, stained with specific pigment. To obtain the vinyl mold aorta was injected through the right and left vinyl acetate, followed by corrosion in sulfuric acid. It was observed that the pancreas is closely related to the liver, gizzard, gall bladder, and duodenum. His face cranial this distal region of the pylorus, while its caudal along the cranial region of the duodenum. Anatomically, the pancreas is an elongated body structure featuring a lightly lobed. As to the pancreas arterial vasculature is flushed in its transverse plane of two arteries arising from the celiac artery, and each antimere two pancreaticoduodenal artery in the cranial region, close to the pylorus by the pancreaticoduodenal artery flow in the caudal portion along the duodenum.

Avaliação de microrganismos antagônicos, Saccharomyces cerevisiae e Bacillus subtilis para o controle de Penicillium Digitatum

Citrus fruits are affected by diverse diseases, mainly the fungal infections, which affect productivity and quality, especially when it targets the market of fresh fruit. Among the fungal diseases that occur in postharvest, there is the green mold caused by Penicillium digitatum. The control measures are based mainly in the treatment of fruits with different combinations of fungicides in packing-house. Due to restrictions on the presence of residues of fungicides in citrus fruits and the increasing development of resistant strains of pathogens to the fungicide used, it is necessary to search for control alternatives such as biological control. Therefore, this study aimed to: (i) verify the antagonistic effect of biological control agents (BCA), being 13 isolates of Bacillus subtilis and 06 isolates of Saccharomyces cerevisiae against P. digitatum, (ii) study in vitro interactions between pathogen and BCA (iii) determine the effect of integration of antagonists with sodium bicarbonate and carnauba wax in the control of green mold. The results showed that the majority of the isolates, and all yeast isolates inhibited the mycelial growth of the phytopathogen. Only one isolate of B. subtilis (ACB-84) was able to inhibit the germination of P. digitatum (72% of inhibition), whereas ACB-K1 and ACB-CR1 (S. cerevisiae) were the most effective with inhibition from 78 and 85.7% respectively. The addition of sucrose (0.5%) favored the inhibition of conidia germination by the yeast isolates. The results from the in vivo control showed the viability of S. cerevisiae ACB-K1 and ACB-CR1 to control P. digitatum in 'Tahiti' lime fruits and orange 'Hamlin' fruits, respectively. The combination of sodium bicarbonate and biocontrol agents did not result in improvements in the curative control of the green mold. Carnauba wax (18% of TSS) favored the antagonistic activity of S. cerevisiae, and this effect depended on the variety of fruits in the study and of the yeast isolate used for the biocontrol.

Degree of conversion and hardness of two different systems of the vitrebond™ glass ionomer cement light cured with blue LED

This study investigated the physicochemical properties of the new formulation of the glass ionomer cements through hardness test and degree of conversion by infrared spectroscopy (FTIR). Forty specimens (n = 40) were made in a metallic mold (4 mm diameter × 2 mm thickness) with two resin-modified glass ionomer cements, Vitrebond™ and Vitrebond™ Plus (3M/ ESPE). Each specimen was light cured with blue LED with power density of 500 mW/cm2during 30 s. Immediately after light curing, 24h, 48h and 7 days the hardness and degree of conversion was determined. The Vickers hardness was performed by the MMT-3 microhardness tester using load of 50 gm force for 30 seconds. For degree of conversion, the specimens were pulverized, pressed with KBr and analyzed with FT-IR (Nexus 470). The statistical analysis of the data by ANOVA showed that the Vitrebond™ and Vitrebond™ Plus were no difference significant between the same storage times (p > 0.05). For degree of conversion, the Vitrebond™ and Vitrebond™ Plus were statistically different in all storage times after light curing. The Vitrebond™ showed higher values than Vitrebond™ Plus (p < 0.05). The performance of Vitrebond™ had greater results for degree of conversion than Vitrebond™ Plus. The correlation between hardness and degree of conversion was no evidence in this study.

Avaliação de genótipos de mamona sob níveis de adubação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Controle de mofo-cinzento (amphobotrys ricini) da mamoneira (ricinus communis l.) por métodos químico, biológico e com óleos essenciais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uma abordagem do funcionamento discursivo das construções adversativas sob a ótica da gramaticalização

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade microbiológica e ocorrência de leveduras em diferentes amostras de queijo tipo minas frescal

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

O reaproveitamento de notícias no jornalismo impresso contemporâneo: o caso do Caderno Diplô, do Le Monde Diplomatique Brasil

Pós-graduação em Comunicação - FAAC

Resistência adesiva de reparos em resina composta: tratamento da superfície com ponta diamantada, jato de óxido de alumínio e laser de Er:YAG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da profundidade de polimerização de uma resina composta, pela técnica trans-dental, utilizando-se três diferentes fontes de luz: halógena, laser de argônio e leds

Pós-graduação em Ciências Odontológicas - FOAR