Ameloblastic fibro-odontosarcoma: a case report

This paper reports one case, of an ameloblastic fibro-odontosarcoma (AFOS) affecting the mandible, in a 12-year-old girl. This neoplasm is a rare odontogenic neoplasm. To the authors' knowledge this is the fifteenth case of AFOS reported in English. The patient's chief complaint was a swelling in the face For 6 months. An incisional biopsy was performed diagnosing the case as all ameloblastic fibroma. After radiography ameloblastic fibro-odontoma was diagnosed. Computed tomography was performed and a stereolithography model made to plan the surgical procedures. A hemimandibulectomy followed by a vascularized fibular flap was then proposed. The surgery was uneventful. Microscopic features diagnosed an AFOS. After 23 months of close follow-up there is no sign of recurrence or metastasis. Dental implants were recently placed in the fibular flap.

Association of 3D Reconstruction and Conventional Radiography for the Description of the Appendicular Skeleton of Chelonoidis carbonaria (Spix, 1824)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reconstruction of deformed defects in field theory from deformed zero modes and applications

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Positioning and localization of two-wavelength interferograms for wavefront reconstruction with volume holographic media

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

An objective reconstruction of the chain of contagion

North's clustering method, which is based on a much used ecological model, the nearest neighbor distance, was applied to the objective reconstruction of the chain of household-to-household transmission of variola minor (the mild form of smallpox). The discrete within-household outbreaks were considered as points which were ordered in a time sequence using a 10-40 day interval between introduction of the disease into a source household and a receptor household. The closer points in the plane were assumed to have a larger probability of being links of a chain of household-to-household spread of the disease. The five defining distances (Manhattan or city-block distance between presumptive source and receptor dwellings) were 100, 200, 300, 400 and 500 m. The subchain sets obtained with the five defining distances were compared with the subchains empirically reconstructed during the field study of the epidemic through direct investigation of personal contacts of the introductory cases with either introductory or subsequent cases from previously affected households. The criteria of fit of theoretical to empirical clusters were: (a) the number of clustered dwellings and subchains, (b) number of dwellings in a subchain and (c) position of dwellings in a subchain. The defining distance closet to the empirical findings was 200 m, which fully agrees with the travelling habits of the study population. Less close but acceptable approximations were obtained with 100, 300, 400 and 500 m. The latter two distances gave identical results, as if a clustering ceiling had been reached. It seems that North's clustering model may be used for an objective reconstruction of the chain of contagious whose links are discrete within-household outbreaks. © 1984.

Free autogenous cartilage grafts to the mandible of rats-histological study.

The present study was designed to histologically evaluate the behavior of free autogenous cartilage grafts to the mandible of rats. A 3-mm segment was removed from the last rib of male adult rats and transplanted fresh to a receptor bed prepared on the mandibular ramus. The results showed that the grafts maintained their vitality up to 120 days and the perichondrium was biologically integrated to the osseous bed. Appositional growth of the grafts was found. New bone formation was observed in close proximity to the grafts, but newly formed trabeculae did not arise from perichondrium.

Surface reconstruction using multiple light sources and perspective projection

This paper presents a method to recover 3D geometry of Lambertian surfaces by using multiple images taken from the same view point and with the scene illuminated from different positions. This approach differs from Stereo Photometry in that it considers the light source at a finite distance from the object and the perspective projection in image formation. The proposed model allows local solution and recovery of 3D coordinates, in addition to surface orientation. A procedure to calibrate the light sources is also presented. Results of the application of the algorithm to synthetic images are shown.

Three-dimensional reconstruction of fracture surfaces: Area matching algorithms for automatic parallax measurements

This paper describes two solutions for systematic measurement of surface elevation that can be used for both profile and surface reconstructions for quantitative fractography case studies. The first one is developed under Khoros graphical interface environment. It consists of an adaption of the almost classical area matching algorithm, that is based on cross-correlation operations, to the well-known method of parallax measurements from stereo pairs. A normalization function was created to avoid false cross-correlation peaks, driving to the true window best matching solution at each region analyzed on both stereo projections. Some limitations to the use of scanning electron microscopy and the types of surface patterns are also discussed. The second algorithm is based on a spatial correlation function. This solution is implemented under the NIH Image macro programming, combining a good representation for low contrast regions and many improvements on overall user interface and performance. Its advantages and limitations are also presented.

Variation in mandible shape in Thrichomys apereoides (Mammalia: Rodentia): Geometric analysis of a complex morphological structure

The model of development and evolution of complex morphological structures conceived by Atchley and Hall in 1991 (Biol. Rev. 66:101-157), which establishes that changes at the macroscopic, morphogenetic level can be statistically detected as variation in skeletal units at distinct scales, was applied in combination with the formalism of geometric morphometrics to study variation in mandible shape among populations of the rodent species Thrichomys apereoides. The thin-plate spline technique produced geometric descriptors of shape derived from anatomical landmarks in the mandible, which we used with graphical and inferential approaches to partition the contribution of global and localized components to the observed differentiation in mandible shape. A major pattern of morphological differentiation in T. apereoides is attributable to localized components of shape at smaller geometric scales associated with specific morphogenetic units of the mandible. On the other hand, a clinal trend of variation is associated primarily with localized components of shape at larger geometric scales. Morphogenetic mechanisms assumed to be operating to produce the observed differentiation in the specific units of the mandible include mesenchymal condensation differentiation, muscle hypertrophy, and tooth growth. Perspectives for the application of models of morphological evolution and geometric morphometrics to morphologically based systematic biology are considered.

Qualitative analysis of two reconstruction techniques and their application in dentistry

Although visualization in the field of dentistry has some of the same requirements as the medicine field, the differences in goal demand specific approaches. This paper reports on the implementation of two fundamentally different approaches to reconstruction of structures from planar cross sections and their application to dentistry data. One of the approaches was an implementation of a distance-based sampling technique, and the other is a new algorithm, based on the Delaunay triangulation. Both were tested using contour data of teeth and the results are compared here in the light of the target applications, which are teaching and training dentistry, as well as simulation of dental procedures and illnesses. Widely mentioned problems encountered in local reconstruction methods such as marching cubes for these cases are clearly illustrated in this paper, and a very satisfactory alternative is given. © 2000 SPIE and IS&T.

P-077. Myxoma of bone. Review of 17 cases

Myxoma of bone (fibromyxoma) is a slowly growing, locally invasive tumor that almost always occurs in the facial bones. The tumor has a potential to recur, but does not metastasize. The lesion is usually painless but causes slowly progressive swelling, sometimes resulting in severe facial deformity. Aim: Review of myxoma of bone experience in two institutions. Methods: Retrospective chart review of all patients with diagnose of myxoma/fibromyxoma of bone identified in the tumor registry of two referral cancer centers: Hospital Erasto Gaerntner (HEG), Curitiba, PR Brazil and University of Sao Paulo (UNESP), Aracaatuba Campus, Sao Paulo, SP Brazil. We reviewed the age, sex, ace, presenting symptoms, topography of lesion and treatment. Results: From January 1972 to July 2000 we found 17 patients from both institutions that met the diagnostic criteria; 15 from HEG and two from UNESP. The median age was 32 years (range 10-55 years). Eleven patients were male, 14 were white and three were black. Only three patients presented with local pain, the remaining were free of symptoms, presenting only with local tumor. The tumor affected the maxilla in 11 patients (six on the right), the mandible in five and the zygomatic bone in one. All patients were treated by excisional surgery and one patient received adjuvant radiation therapy. Nine patients needed reconstruction after the tumor excision. Five of them were reconstructed with local soft tissue flaps; two received iliac crest autologous bone graft; and two had a microvascularized autologous fibula graft. Conclusion: The myxoma of bone in our experience is a rare tumor and occurs more frequently in the maxilly bone in young males. These findings are consistent with the literature data.

Holocene paleoclimatic reconstruction based on the Lagoa Dourada deposits, southern Brazil

The Lagoa Dourada is a circular-shaped pond formed on the Furnas Formation (Devonian of the Paraná Basin), filled by late Pleistocene - Holocene sediments. It lies in the hydrographic basin of the Guabiroba River, a tributary of the Tibagi River situated in the Campos Gerais region of the State of Paraná, southern Brazil. The pond is about 200 m in diameter and the maximum water depth is 5.4 m. Geological, chemical, textural and mineralogical studies on a core sample of the sediments collected from the Lagoa Dourada, 12.2 m thick, was obtained for investigations of paleoenvironmental changes as well as to provide additional data to support previous reconstructions based on palynomorphs and diatoms. Within the period recorded in the core, the pond has been filled by sandy material introduced by springs at the northern edge of the pond as well as by muddy material brought in by floodwaters of the Guabiroba River. Thus, the sandy layers could be interpreted as evidence of drier climates with consequent diminution of fluvial overflow, but with maintenance of the sandy deposits coming from springs. The occurrence of euhedral pyrite in the sediments, locally associated with gypsum, may indicate periods of increase in the organic matter content or an increase in the water salinity, what could be related to greater evaporation under drier paleoclimate regimes. Three cycles defined by an increase in the total carbon content of the sediments of the pond were observed. These cycles seem to correspond to an increase in the isotope ratio 13C/12C (δ13C). Several hypotheses can be suggested to explain the presence of these cycles, including the alternation of wetter or drier climatic phases. The convergence of the sedimentological data obtained during this study with previous microfossil paleoclimatic (pollens and diatoms) indicators and radiocarbon dating suggests that a drier paleoclimatic phase occurred around 8720±150 years B.P. The evidence for a second drier phase in more recent times is less consistent. This subsequent phase could correspond to the drier phase in southern and southeastern Brazil between 5000 and 3000 years B.P. as suggested by other paleoclimatic studies.

Skull and mandible formation in the cuckoo (Aves, Cuculidae): Contributions to the nomenclature in avian osteology and systematics

The study of the contributions of different bones to the formation of the skeleton in birds is necessary: (1) to establish homologies in comparative anatomy; (2) to delimit each bone structure correctly, mainly in relation to the skull and mandible where the bones are fused to each other in adults; and (3) to standardize nomenclature in avian osteology. In this paper at least one young specimen belonging to each sub-family of Cuculidae was examined in order to identify each bone in terms of boundaries and contributions to skull and mandible formation. These cuckoos specimens were also compared with adults and young of turacos and hoatzin. The results show little variation of skull and jaw among the young cuckoos studied compared with the variations among adult specimens. However, it provides new suggestions for the boundaries and nomenclature of certain osseous structures in the skull and mandible of birds, specifically fissura zona flexoria craniofacialis, prominetia frontoparietalis, crista temporalis transversa, processus squamosalis, fossa laterosphenoidalis, tuberculum laterosphenoidale and processus retroangularis. This study also provides more reliable homologies for use in cladistic analysis and above all it contributes to the phylogenetic position of Cuculidae within Neognathae, specifically the skull formation suggest that turacos and hoatzin are more similar to each other than either is to the cuckoos. © 2005 Taylor & Francis.

A new device in immediately loaded implant treatment in the edentulous mandible

Purpose: This article reports preliminary clinical results of the Speed Master system, a method for immediate loading of implants for the treatment of mandibular edentulism. Materials and Methods: Fifteen patients with edentulous mandibles were consecutively included in the study. Each received 4 implants between the mental foramina placed using the system's surgical guides. Permanent fixed prostheses fabricated over premanufactured titanium bars were attached to the implants on the day of implant placement. The patients were followed for 15 to 27 months (mean, 19 months). Peri-implant tissues were periodically evaluated. Marginal bone loss was monitored with periapical radiographs using a computerized technique. Satisfaction was assessed by means of a questionnaire. Results: The overall implant and prosthetic survival rates were 100%. At the time of the final follow-up visit, mean marginal bone loss was 1.11 mm, and bleeding on probing was not observed. Only 6.7% of the patients reported any discomfort during treatment, and all patients would recommend the procedure to others. Discussion: The immediate loading of implants placed in the edentulous mandible with the Speed Master surgical and prosthetic protocol reduces treatment time and number of surgical procedures in comparison to classic delayed loading protocols. Conclusion: The rehabilitation of the mandible with an immediately delivered occlusally loaded hybrid prosthesis supported by 4 implants does not appear to jeopardize the success of the osseointegration and represents a viable treatment option.