Evolution of subpatent parasitaemia in Trypanosoma cruzi chronically infected mice with the help of a cyclophosphamide amplification transfer assay

Avaliamos o potencial do ensaio clássico de subinoculação, modificado pelo tratamento com ciclofosfamida dos animais receptores, na detecção de parasitemias ocultas em camundongos com in-fecção crônica pelo Trypanosoma cruzi. O ensaio, além de simples, mostrou ter uma alta sensibilidade; assim, utilizando-se parasitas da fase aguda, o tratamento com ciclofosfamida revelou parasitemias em 53,8% dos animais infectados com um tripanosoma da cepa y, e em 20% dos animais infectados com um tripanosoma da cepa CL. O tratamento com ciclofosfamida aumentou a sensibilidade do ensaio de subinoculação nas infecções pela cepa CL, e resultou em igual sensibilidade quando utilizada a cepa Y. Nos camundongos de fase crônica, obtidos a partir de diversos esquemas de imunoprofilaxia (BCG, soro de camundongo imune) ou quimioterapia, o ensaio revelou parasitemias ocultas em 99% dos animais. Auxiliados pelo método da subinoculação-ciclofosfamida estudamos no espaço de um ano a evolução das parasitemias ocultas em um grupo de camundongos infectados que sobreviveram à fase aguda pelo tratamento com Benzonidazol. O ensaio revelou parasitemias ocultas em 100% dos animais. Entretanto, padrões contínuos e discontinuos de positividade puderam ser detectados.

Effect of microwave treatments on dimensional accuracy of maxillary acrylic resin denture base

Microwave energy has been used as an alternative method for disinfection and sterilization of dental prostheses. This study evaluated the influence of microwave treatment on dimensional accuracy along the posterior palatal border of maxillary acrylic resin denture bases processed by water-bath curing. Thirty maxillary acrylic bases (3-mm-thick) were made on cast models with Clássico acrylic resin using routine technique. After polymerization and cooling, the sets were deflasked and the bases were stored in water for 30 days. Thereafter, the specimens were assigned to 3 groups (n=10), as follows: group I (control) was not submitted to any disinfection cycle; group II was submitted to microwave disinfection for 3 min at 500 W; and in group III microwaving was done for 10 min at 604 W. The acrylic bases were fixed on their respective casts with instant adhesive (Super Bonder®) and the base/cast sets were sectioned transversally in the posterior palatal zone. The existence of gaps between the casts and acrylic bases was assessed using a profile projector at 5 points. No statistically significant differences were observed between the control group and group II. However, group III differed statistically from the others (p<0.05). Treatment in microwave oven at 604 W for 10 min produced the greatest discrepancies in the adaptation of maxillary acrylic resin denture bases to the stone casts.

Influence of microwave polymerization method and thickness on porosity of acrylic resin

Purpose: This study evaluated the influence of polymerization cycle and thickness of maxillary complete denture bases on the porosity of acrylic resin. Materials and Methods: Two heat-activated denture base resins - one conventional (Clássico) and one designed for microwave polymerization (Onda-Cryl) - were used. Four groups were established, according to polymerization cycles: A (Onda-Cryl, short microwave cycle), B (Onda-Cryl, long microwave cycle), C (Onda-Cryl, manufacturing microwave cycle), and T (Clássico, water bath). Porosity was evaluated for different thicknesses (2.0, 3.5, and 5.0 mm; thicknesses I, II, and III, respectively) by measurement of the specimen volume before and after its immersion in water. The percent porosity data were submitted to Kruskal-Wallis for comparison among the groups. Results: The Kruskal-Wallis test detected that the combinations of the different cycles and thicknesses showed significant differences, and the mean ranks of percent porosity showed differences only in the thinnest (2.0 mm) microwave-polymerized specimens (A = 53.55, B = 40.80, and C = 90.70). Thickness did not affect the results for cycle T (I = 96.15, II = 70.20, and III = 82.70), because porosity values were similar in the three thicknesses. Conclusions: Microwave polymerization cycles and the specimen thickness of acrylic resin influenced porosity. Porosity differences were not observed in the polymerized resin bases in the water bath cycle for any thickness. © 2007 by The American College of Prosthodontists.

Effect of microwave disinfection on physical and mechanical properties of acrylic resins

This study evaluated the effect of microwave energy on the hardness, impact strength and flexural strength of the Clássico, Onda-Cryl and QC-20 acrylic resins. Aluminum die were embedded in metallic or plastic flasks with type III dental stone, in accordance with the traditional packing technique. A mixing powder/liquid ratio was used according to the manufacturer's instructions. After polymerization in water batch at 74°C for 9 h, boiling water for 20 min or microwave energy at 900 W for 10 min, the specimens were deflasked after flask cooling at room temperature, and submitted to finishing. Specimens non-disinfected and disinfected by microwave irradiation were submitted to hardness, impact and flexural strength tests. Each specimen was immersed in distilled water and disinfected in a microwave oven calibrated to 650 W for 3 min. Knoop hardness test was performed with 25 g load for 10 s, impact test was carried out using the Charpy system with 40 kpcm, and 3-point bending test with a crosshead speed of 0.5 mm/min until fracture. Data were submitted to statistical analysis by ANOVA and Tukey's test (α=0.05). Disinfection by microwave energy decreased the hardness of Clássico and Onda-Cryl acrylic resins, but no effect was observed on the impact and flexural strength of all tested resins.

Effect of ridge lap surface treatment and thermocycling on microtensile bond strength of acrylic teeth to denture base resins

This study evaluated the effect of denture base polymer type (heat- and microwave-polymerized), ridge lap surface treatment (with and without methyl methacrylate-MMA etching) and thermocycling on the microtensile bond strength (mTBS) of Biotone acrylic teeth. Flat-ground, ridge-lap surface of posterior artifcial teeth were bonded to cylinders of each denture base resin, resulting in the following groups (n=6): G1a - Clássico/with MMA etching; G1b - Clássico/without MMA etching; G2a - OndaCryl/with MMA etching; G2b - OndaCryl/without MMA etching. Rectangular bar specimens with a cross-sectional area of 1 mm 2 were prepared. Half of the bars in each group were thermocycled (5,000 cycles between 4°C and 60°C). mTBS testing was performed in an universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed statistically by three-way ANOVA (a=0.05). There was no statisti-caly signifcant difference (p>0.05) for the factors (resin, surface treatment,and thermocycling) or their interactions. The mean mTBS values (MPa) and standard deviations were as follows: Thermocycling - G1a: 41.00 (14.00); G1b: 31.00 (17.00); G2a: 50.00 (27.00); G2b: 40.00 (18.00); No thermocycling - G1a: 37.00 (14.00); G1b: 43.00 (25.00); G2a: 43.00 (14.00); G2b: 40.00 (27.00). The mTBS of Biotone artifcial teeth to the denture base acrylic resins was not infuenced by the polymer type, surface treatment or thermocycling.

Assessment of the flexural strength of two heat-curing acrylic resins for artificial eyes

Prosthetic eyes are artificial substitutes for the eyeball, made of heat-curing acrylic resin, serving to improve the esthetic appearance of the mutilated patient and his/her inclusion in society. The aim of this study was to assess the flexural strength of two heat-curing acrylic resins used for manufacturing prosthetic eyes. Thirty-six specimens measuring 64 x 10 x 3.3 mm were obtained and divided into four groups: acrylic resin for artificial sclera N1 (Artigos Odontológicos Clássico, São Paulo, SP, Brazil), heat-cure water technique (GI) and microwave-cured (GII); colorless acrylic resin for prosthetic eyes (Artigos Odontológicos Clássico, São Paulo, SP, Brazil), heat-cure water technique (GIII) and microwave-cured (GIV). Mechanical tests using three point loads were performed in a test machine (EMIC, São José dos Pinhais, PR, Brazil). The analysis of variance and the Tukey test were used to identify significant differences (p < 0.01). Groups GII and GIV presented, respectively, the highest (98.70 ± 11.90 MPa) and lowest means (71.07 ± 8.93 MPa), with a statistically significant difference. The cure method used for the prosthetic eye resins did not interfere in their flexural strength. It was concluded that all the resins assessed presented sufficient flexural strength values to be recommended for the manufacture of prosthetic eyes.

Effect of disinfectant solutions on a denture base acrylic resin.

The aim of this study was to evaluate the hardness, roughness and mass loss of an acrylic denture base resin after in vitro exposure to four disinfectant solutions. Forty specimens (Clássico, Brazil) were prepared and randomly assigned to 4 groups n = 10) according to the disinfectant solution: G1: control, stored in distilled water at 37 degrees C; G2: 1% sodium hypochlorite; G3: 2% glutaraldehyde; G4: 4% chlorhexidine. G2 to G4 were immersed for 60 minutes in the disinfectant solution. Measurements were carried out both before and after immersion in the solution. The surface was analyzed with a surface roughness tester (Surfcorder SE 1700 KOZAKALAB), a microdurometer FM-700 (Future Tech) and a scanning electron microscope (DSM 962-ZEISS). Loss of mass was determined with a digital weighing scale. After disinfection procedures, values were analyzed statistically. The acrylic denture base resin may be vulnerable to surface changes after in vitro immersion in the disinfectant solutions studied.

Musculoskeletal disorders (MSDs) in dancers and former dancers participating in the largest dance festival in the world

Objective: To verify the presence of musculoskeletal disorders (MSD) in dancers and former dancers participating in the 27th Joinville Dance FestivalMaterial and methods: The research was conducted at the 27th Joinville Dance Festival in Santa Catarina, Brazil, with 173 participants in the competition, where 139 were dancers and 34 were former dancers with at least ten years of practiceIn order to obtain information related to MSDs, dancers answered a specific questionnaireResults: The study group consisted of adults (28±9 years) with body mass index within the normal range (21.3±2.3) with high weekly training time (955.7±837.2) and featuring long-time experience in dancing (18±7years)The lumbar spine and knees were the most affected by MSDsThe pain of high intensity was the symptom that most often appeared in reports among survey participantsConclusion: It is important to have deeper knowledge of the prevalence of pain among professional dancers, the factors associated with pain conditions and its impact on everyday life in order to plan new forms of prevention and plan new forms of prevention and treatment within a multidisciplinary approach© 2012 Elsevier Masson SAS.

Use of sneaker rush and symptoms occurrence of skeletal muscle (SME) in Ballerina

Introduction: Technical literature shows high frequencies of injuries occurring in classical ballet dancers; however, only limited information about the permanent effects of chronic diseases are mentioned. Objective: To compare the presence of MSD among dancers who wear pointe shoes and those who do not. Methods: The research was conducted at the 27th Festival of Joinville in Santa Catarina. The study had the participation of 111 dancers, 88 of whom wore pointe shoes while 23 did not. Specific procedures were used to obtain information related to MSD and foot injuries caused by dancing. Results: The most affected parts were the knees (29.7% with pointe shoes versus 39% without), spine (26.4% with pointe shoes versus 22% without), and ankle/foot (20% with pointe shoes versus 12.2% without). Through odds ratio and respective confidence intervals (IC95%), the study identified protection factor in the knees (0.24; CI95% - 0.09-0.64) and legs (0.11; CI95% - 0.02-0.65) for dancers who wear pointe shoes. It was found that the risk of injuries in specific structures of the foot is significantly higher among those dancers. In this case, the appearance of bunions (9.74; CI95% - 1.25-75,99), calluses on the toes (3.46; CI95% - 1.29-9.27) and the association of the three (4.47; CI95% - 1.69-11.83) were those that showed an increased risk factor compared to dancers who do not stand en pointe. Conclusion: The use of pointe shoes in elite Brazilian dancers was associated to lower occurrence of MSD in the knee and leg, however it was strongly associated to foot injuries.

Clinical, serological, and parasitological analysis of snakes naturally infected with Cryptosporidium serpentis

Infection by Cryptosporidium serpentis is one of the most important diseases in reptiles and is characterized by chronic clinical or subclinical infection and the presence of hypertrophic gastritis, food regurgitation, progressive weight loss, mortality, and intermittent or continuous shedding of oocysts in the feces. The objectives of this study were to standardize an indirect enzyme-linked immunosorbent assay (ELISA) to detect antibodies against C. serpentis and to evaluate the clinical, parasitological, and humoral immune response in snakes naturally infected with C. serpentis. Twenty-one snakes naturally infected with C. serpentis and housed at the Butantan Institute, São Paulo, Brazil, underwent clinical and parasitological analyses for C. serpentis infection through daily records of clinical signs and a monthly survey of fecal shedding of oocysts using the Kinyoun's acid-fast staining. The serological evaluation was performed monthly by indirect ELISA using crude total antigen from oocysts of C. serpentis to detect anti-C. serpentis antibodies. Clinical symptoms consisted of food regurgitation, inappetence, and progressive weight loss. The parasitological analysis revealed intermittent fecal shedding of a variable number of oocysts in all snakes, with positivity in 85.32% (157/184) of the samples. The indirect ELISA was positive in 68.25% (86/126) of the samples. A humoral immune response was observed in most animals; however, fluctuating antibodies levels, leading to alternating positive and negative results, were observed in most snakes. © 2013 Elsevier B.V. All rights reserved.

Alterações clínicas e morfológicas das córneas de coelhos implantadas com anéis intraestromais de FERRARA® com e sem revestimento de condrointin sulfato

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelos matemáticos para o problema integrado de dimensionamento de lotes e corte de estoque undimensional

Pós-graduação em Matemática - IBILCE

Integridade, disponibilidade e acurácia no posicionamento RTK e RTK em rede: Investigação no contexto da rede GNSS ativa do Estado de São Paulo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

O cristo no terceiro milênio: a visão plástica da arte sacra atual de Cláudio Pastro

Pós-graduação em Artes - IA

Características dos parâmetros do condutor equivalente a um feixe de subcondutores de linhas de transmissão: análise inicial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)