Performance of four tomato cultivars, with and without ground cover

The aim of the study was to evaluate the production of four tomato cultivars of determinate growth, in the field, with and without ground cover. The cultivars examined were: 'AP-533', 'AP-529', 'Hypeel 5131 and 'PS-41816', which were cultivated with a spacing of 1 m between rows and 0.4 m between plants. The experimental design utilized was that of subdivided parcels, where parcels were provided with and without a ground cover of black polyethylene, and subparcels consisted of the cultivars; eight repetitions were used. The eight central plants in the parcel were evaluated according to the following characteristics: fresh weight of fruit per plant and number of fruit per plant, separated by size. For the classification of fruit, the same plants were divided into classes based on the diameter of the fruit. The diameter size was as follows: class 1, 3 cm; class II, 4 cm; class III, 4.5 cm; and class IV, 5.5 cm. The results showed that there were no significant differences in production among the cultivars studied. Cultivars 'AP-533' and 'Hypeel 513' demonstrated greater production per plant, when ground cover was used, yielding 1474 and 1404 g/plant, respectively. When black polyethylene ground cover was not used, these cultivars produced 1258 and 1271 g of fruit per plant, respectively. The cultivars 'AP-529' and 'PS41818' showed a greater yield of fruit when cultivated without ground cover, with 1548 and 1663 g/plant, respectively. The cultivar 'Hypeel 513' had the highest percentage of fruit with the largest dimensions. An interaction was appeared between 'AP-529' and ground cover, where the production of this cultivar was lower with black polyethylene ground cover compared to bare ground. It is concluded that there are no significant differences in the cultivation of the tomato hybrids 'AP-533', 'Hypeel 513' and 'PS-41816' with and without ground cover, but that the cultivar 'AP-529' should be planted preferentially in soil without black polyethylene cover.

Desempenho e qualidade de frutos de tomateiro em cultivo protegido com diferentes números de hastes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uso da poda e de diferentes diâmetros de alporques sobre o desenvolvimento e o acúmulo de nutrientes de mudas de lichieira

O objetivo deste estudo foi avaliar os efeitos do diâmetro do caule e da poda de alporques sobre o desenvolvimento e o acúmulo de nutrientes em mudas de lichieira cultivadas em substrato. Para isso utilizou-se de alporques da variedade Bengal. O delineamento experimental foi o inteiramente casualizado, em esquema fatorial 3 x 2, com oito repetições, sendo três diâmetros do alporque: fino (1,0 ±0,5 cm); médio (2,0 ±0,5 cm) e grosso (3,0 ±0,5 cm), e alporques com e sem poda. As mudas de lichieira foram cultivadas durante 140 dias após o plantio dos alporques. Avaliaram-se a matéria seca das brotações da parte aérea e das raízes, e os teores de macro e micronutrientes. A melhor muda de lichieira foi obtida de alporque com diâmetro grosso, e podado. O alporque de diâmetro médio e fino não-podado, comparado ao podado, proporcionou maior desenvolvimento da muda de lichieira. O alporque com diâmetro grosso proporcionou maior acúmulo de nutrientes na parte aérea e na raiz da muda de lichieira.

Marcha de absorção de nutrientes e crescimento de mudas de caramboleira enxertada com a cultivar nota-10

The nutritional state of star fruit seedlings must be adequate for a successful field implementation. The objective of the present work was to study the growth and uptake of macro e micronutrients curves by star fruit plants budded with Nota 10 cultivar in nutrient solution conditions. The experimental design was randomized complete blocks, with four replications and six treatments, which were consisted by the times of collects during the 150 days of the experiment (each 25 days). In each collection, the plant growth was evaluated by the division of the plants in root, stem and leaves in order to obtain the height, diameter of the stem, leave area and the dry matter. The accumulation of dry matter followed sigmoidal adjustment, while the uptake of nutrients followed quadratic adjustment, except Mg, P, and Cu that followed sigmoidal adjustment. The accumulation of nutrients by star fruit seedlings 'nota 10' followed the sequence: Nof nutrients was bigger in leaves than the stem and roots, in exception of the P, Zn, Fe and Cu. The period of greatest demand for nutrients was between 90 and 150 days after transplanting.

Construction of an alkaline phosphatase-liposome system: a tool for biomineralization study

Alkaline phosphatase is required for the mineralization of bone and cartilage. This enzyme is localized in the matrix vesicle, which plays a role key in calcifying cartilage. In this paper. we standardize a method for construction an alkaline phosphatase liposome system to mimic matrix vesicles and examine a some kinetic behavior of the incorporated enzyme. Polidocanol-solubilized alkaline phosphatase, free of detergent, was incorporated into liposomes constituted from dimyristoylphosphatidylcholine (DMPC), dilaurilphosphatidylcholine (DLPC) or dipalmitoylphosphatidylcholine (DPPC). This process was time-dependent and >95% of the enzyme was incorporated into the liposome after 4 h of incubation at 25 degreesC. Although, incorporation was more rapid when vesicles constituted from DPPC were used, the incorporation was more efficient using vesicles constituted from DMPC. The 395 nm diameter of the alkaline phosphatase-liposome system was relatively homogeneous and more stable when stored at 4 degreesC.Alkaline phosphatase was completely released from liposome system only using purified phosphatidylinositol-specific phospholipase C (PIPLC). These experiments confirm that the interaction between alkaline phosphatase and lipid bilayer of liposome is via GPI anchor of the enzyme, alone. An important point shown is that an enzyme bound to liposome does not lose the ability to hydrolyze ATP, pyrophosphate and p-nitrophenyl phosphate (PNPP), but a liposome environment affects its kinetic properties, specifically for pyrophosphate.The standardization of such system allows the study of the effect of phospholipids and the enzyme in in vitro and in vivo mineralization, since it reproduces many essential features of the matrix vesicle. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Enhancement of thermal stability, strength and extensibility of lipid-based polyurethanes with cellulose-based nanofibers

Cellulose was extracted from lignocellulosic fibers and nanocrystalline cellulose (NC) prepared by alkali treatment of the fiber, steam explosion of the mercerized fiber, bleaching of the steam exploded fiber and finally acid treatment by 5% oxalic acid followed again by steam explosion. The average length and diameter of the NC were between 200-250 nm and 4-5 nm, respectively, in a monodisperse distribution. Different concentrations of the NC (0.1, 0.5, 1.0, 1.5, 2.0 and 2.5% by weight) were dispersed non-covalently into a completely bio-based thermoplastic polyurethane (TPU) derived entirely from oleic acid. The physical properties of the TPU nanocomposites were assessed by Fourier Transform Infra-Red spectroscopy (FTIR), Thermo-Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), Dynamic Mechanical Analysis (DMA) and Mechanical Properties Analysis. The nanocomposites demonstrated enhanced stress and elongation at break and improved thermal stability compared to the neat TPU. The best results were obtained with 0.5% of NC in the TPU. The elongation at break of this sample was improved from 178% to 269% and its stress at break from 29.3 to 40.5 MPa. In this and all other samples the glass transition temperature, melting temperature and crystallization behavior were essentially unaffected. This finding suggests a potential method of increasing the strength and the elongation at break of typically brittle and weak lipid-based TPUs without alteration of the other physico-chemical properties of the polymer. (C) 2012 Elsevier Ltd. All rights reserved.

MYCELIAL DEVELOPMENT of Lentinula edodes IN CULTURE MEDIA WITH DIFFERENT ORGANIC SUBSTRATES

The radial mycelial growth of Lentinula edodes (Berk) Pegler, strain LE-96/13, was studied in culture media prepared with organic residues extract, by using substrates prepared with pineapple (Ananas comosus (L.) Merril) crown, Astrocaryum aculeatum Meyer peel, Theobroma grandiflorum Schum shell, Musa sp. (genomic group AAB, subgroup Pacovan) peel, and Musa sp. (genomic group AAB, subgroup Praia) peel, with three supplementation levels with wheat bran (0, 10 and 20%), and incubated at 25 degrees C. The experimental design was totally randomized, in a 5x3 factorial scheme, adding up 15 treatments with 4 repetitions, and each repetition corresponding to a Petri dish. The diameter of the colony was evaluated daily during nine days of incubation. After that period, it was verified that the highest mycelial growth averages of strain LE-96/13 of L. edodes were found in culture media prepared with T. grandiflorum Schum shell (whose supplementation with wheat bran was favorable for Mushroom development) and A. aculeatum Meyer peel (whose supplementation did not favor the mycelial growth of L. edodes in relation to the medium not supplemented).

Biomass production and accumulation of nutrients in shoots of Giant Guinea sorghum plants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Isolation and mycelial growth of Diehliomyces microsporus: effect of culture medium and incubation temperature

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Possíveis efeitos alelopaticos de Brachiaria decumbens sobre o crescimento inicial de limão cravo (Citrus limonia)

Foram estudados os possíveis efeitos alelopáticos da incorporação da matéria seca da parte aérea de Brachiaria decumbens, ao substrato, nas concentrações de 0, 1,5 e 3,0% (p/p) sobre o crescimento inicial de limão cravo (Citrus limonia Osbeck), em casa-de-vegetação. Foram determinados os parâmetros biométrico s e algumas propriedades físico-químicas da solução do solo. A maior quantidade de matéria seca incorporada causou redução de 44, 42, 57 e 55% das médias da altura, teor de clorofila, área foliar e acúmulo de matéria seca total, respectivamente. O potencial osmótico, pH, condutividade elétrica e os teores de nutrientes da solução do solo foram alterados. Provavelmente, a redução do crescimento observada seja devida a deficiência de N causada por alterações na dinâmica do N-solo em função da incorporação de B. decumbens.

Crescimento e produção de gérbera fertirrigada com solução nutritiva

Este trabalho foi conduzido com o objetivo de avaliar as características de crescimento e produção de quatro cultivares de gérbera de vaso fertirrigadas com duas soluções nutritivas. O experimento foi realizado em casa-de-vegetação, durante o período de maio a julho de 2006, na UNESP-FCA em Botucatu-SP. O delineamento experimental foi de blocos casualizados e constituído em esquema fatorial 4x2, sendo 4 cultivares de gérbera (Cherry, Golden Yellow, Salmon Rose e Orange) e 2 soluções nutritivas. As plantas foram conduzidas em vasos com volume de 1,3 L, preenchidos com substrato composto de 70% de casca de pinus fina e 30% de terra de subsolo. Avaliou-se o número de folhas e diâmetro de planta semanalmente durante o ciclo da cultura; área foliar e fitomassa seca ao final dos períodos vegetativo e reprodutivo; tempo necessário para a produção, número de inflorescências, diâmetro das inflorescências e hastes e altura de planta, no ponto de comercialização. As cultivares responderam de maneira diferenciada quanto às características de crescimento, Salmon Rose e Cherry apresentaram maior formação de parte aérea; Golden Yellow e Orange foram mais compactas. No ponto de comercialização, somente altura, diâmetro de inflorescência e haste apresentaram variação entre as cultivares. As duas soluções nutritivas foram eficientes para a produção de plantas de qualidade.

Use of glass transition temperature for stabilization of board's cracks of Eucalyptus grandis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lumber quality of Eucalyptus grandis as a function of diametrical position and log steaming

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Direct observation of oxidative stress on the cell wall of Saccharomyces cerevisiae strains with atomic force microscopy

We imaged pores on the surface of the cell wall of three different industrial strains of Saccharomyces cerevisiae using atomic force microscopy. The pores could be enlarged using 10 mM diamide, an SH residue oxidant that attacks surface proteins. We found that two strains showed signs of oxidative damage via changes in density and diameter of the surface pores. We found that the German strain was resistant to diamide induced oxidative damage, even when the concentration of the oxidant was increased to 50 mM. The normal pore size found on the cell walls of American strains had diameters of about 200nm. Under conditions of oxidative stress the diameters changed to 400nm.This method may prove to be a useful rapid screening process (45-60 min) to determine which strains are oxidative resistant, as well as being able to screen for groups of yeast that are sensitive to oxidative stress. This rapid screening tool may have direct applications in molecular biology (transference of the genes to inside of living cells) and biotechnology (biotransformations reactions to produce chiral synthons in organic chemistry.

Antidiarrheal activity of Guazuma ulmifolia Lam. (Sterculiaceae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)