Gelation and drying of weakly bonded silica-PPO nanocomposites

Silica-poly(oxypropylene) (PPO) nanocomposites containing PPO with weak physical bonds between the organic (PPO) and inorganic (silica) phases were obtained by the sol-gel procedure. Three precursor sols containing silica and PPO with molecular weights of 1000, 2000 and 4000g/mol were prepared. The structure changes during the whole sol-gel process, i.e. sol formation, sol-gel transition and gel aging and drying were investigated in situ by small angle X-ray scattering (SAXS). The experimental SAXS curves corresponding to sols and wet gels containing PPO of molecular weight 1000g/mol indicate that the aggregates formed during the studied process are fractal objects. Close to the sol-gel transition and during gel aging the fractal dimension is D=2.5. A clearly different structure evolution occurs in samples prepared with PPO with molecular weights 2000 and 4000 g/mol. Our SAXS results indicate the presence of two coexisting and well-defined structure levels, one of them corresponding to small silica clusters and the other to large silica aggregates. These two levels remain along the whole transformation. The SAXS curves of all dry samples are similar to those of the corresponding wet gels suggesting that no significant changes at nanoscopic scale occur during the drying process.

Territorial hypothesis predicts the trade-off between reproductive opportunities and parental care in three species of damselfishes (Pomacentridae: Actinopterygii)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Economic viability and selection of irrigation systems using simulation and stochastic dominance

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modal representation of three-phase lines applying two transformation matrices: Evaluation of its eigenvectors

The objective of this paper is to show an alternative representation in time domain of a non-transposed three-phase transmission line decomposed in its exact modes by using two transformation matrices. The first matrix is Clarke's matrix that is real, frequency independent, easily represented in computational transient programs (EMTP) and separates the line into Quasi-modes α, β and zero. After that, Quasi-modes a and zero are decomposed into their exact modes by using a modal transformation matrix whose elements can be synthesized in time domain through standard curve-fitting techniques. The main advantage of this alternative representation is to reduce the processing time because a frequency dependent modal transformation matrix of a three-phase line has nine elements to be represented in time domain while a modal transformation matrix of a two-phase line has only four elements. This paper shows modal decomposition process and eigenvectors of a non-transposed three-phase line with a vertical symmetry plane whose nominal voltage is 440 kV and line length is 500 km. ©2006 IEEE.

An alternative procedure to decrease the dimension of the frequency dependent modal transformation matrices: Application in three-phase transmission lines with a vertical symmetry plane

The objective of this paper is to show an alternative representation in time domain of a non-transposed three-phase transmission line decomposed in its exact modes by using two transformation matrices. The first matrix is Clarke's matrix that is real, frequency independent, easily represented in computational transient programs (EMTP) and separates the line into Quasi-modes α, β and zero. After that, Quasi-modes α and zero are decomposed into their exact modes by using a modal transformation matrix whose elements can be synthesized in time domain through standard curve-fitting techniques. The main advantage of this alternative representation is to reduce the processing time because a frequency dependent modal transformation matrix of a three-phase line has nine elements to be represented in time domain while a modal transformation matrix of a two-phase line has only four elements. This paper shows modal decomposition process and eigenvectors of a non-transposed three-phase line with a vertical symmetry plane whose nominal voltage is 440 kV and line length is 500 km. © 2006 IEEE.

Silica coating on alumina ceramic: comparison of three chairside air-abrasion devices working for different times and distances.

This study evaluated, by scanning electron microscope (SEM) and EDS, the effect of different strategies for silica coating (sandblasters, time and distance) of a glass-infiltrated ceramic (In-Ceram Alumina). Forty-one ceramic blocks were produced. For comparison of the three air-abrasion devices, 15 ceramic samples were divided in three groups (N.=5): Bioart, Microetcher and Ronvig (air-abrasion parameters: 20 s at a distance of 10 mm). For evaluation of the time and distance factors, ceramic samples (N.=5) were allocated in groups considering three applied times (5 s, 13 s and 20 s) and two distances (10 mm and 20 mm), using the Ronvig device. In a control sample, no surface treatment was performed. After that, the micro-morphologic analyzes of the ceramic surfaces were made using SEM. EDS analyzes were carried out to detect the % of silica on representative ceramic surface. ANOVA and Tukey tests were used to analyze the results. One-way ANOVA showed the silica deposition was different for different devices (P=0.0054). The Ronvig device promoted the highest silica coating compared to the other devices (Tukey test). Two-way ANOVA showed the distance and time factors did not affect significantly the silica deposition (application time and distance showed no statistical difference). The Ronvig device provided the most effective silica deposition on glass-infiltrated alumina ceramic surface and the studied time and distance for air-abrasion did not affect the silica coating.

Cultivation of Agaricus blazei in the environmental protection area of the Baturité region under three types of casing soils

The outdoor cultivation (ditches) of Agaricus blazei was evaluated in the protected natural area (APA) of the mountainous region of Baturité on three types of casing soils (A, B and C). Casing soil A (horizon A) of the local soil was used (Alfisol). Casing B was obtained with a mixture of 30% of eucalyptus charcoal (1-2 cm of length) and 70% of horizon B of the local soil. Casing C was composed of 25% of vermiculite, 25% of coconut fiber and 50% of coarse sand. Temperature, relative humidity and pluviometric rates were monitored. The physical-chemical properties of the three casing soils were analyzed. The effect of the casing soil on the number and weight of the mushrooms, productivity, yield and biological efficiency of A. blazei were evaluated. The yield, productivity, biological efficiency and number of mushrooms were higher when using soil A. The highest productivity for soil A was attributed mainly to the physical characteristics, which were considered more appropriate for the cultivation, in addition to the high pluviometric rates and relative humidity. The productivity with soil A (9.62%) is comparable with the average productivity obtained in Brazil, meaning that the cultivation of A. blazei in this APA may have good perspectives for cultivation.

Comparison between Itraconazole and Cotrimoxazole in the Treatment of Paracoccidiodomycosis

BackgroundThere are no published reports on studies comparing itraconazole (ITC), sulfamethoxazole-trimethoprim (cotrimoxazole, CMX), and ITC followed by CMX (ITC/CMX) in the treatment of paracoccidiodomycosis. This study aimed to compare the efficacy, effectiveness, safety and time to clinical and serologic cure in paracoccidioidomycosis patients treated with ITC or CMX, the antifungal agents most widely used.MethodologyA quasi-experimental study was performed in 177 patients with a confirmed or probable diagnosis of paracoccidioidomycosis. Treatment was divided into two stages: 1) initial, which was continued until clinical cure was achieved and the erythrocyte sedimentation rate decreased to normal values; 2) complementary, which was continued until serologic cure was achieved. Medians were compared via the Mann-Whitney test, and frequencies were compared via the chi-squared test. The assessment of variables as a function of time was performed using Kaplan-Meier curves and Cox regression. The significance level was established as p <= 0.05.Principal FindingsNo difference was found in the efficacy and effectiveness of the initial treatment of 47 individuals given ITC and 130 individuals given CMX; however, the time to clinical cure was shorter in the former compared with the latter group (105 vs. 159 days; p = 0.001), specifically in patients with the chronic form. Efficacy and effectiveness of the three regimens were similar in the complementary treatment; however, the time to serologic cure was shorter when ITC (161 days) or CMX (495 days) was used compared with ITC/CMX (881 days) [p = 0.02]. The independent predictors of a shorter time to serologic cure were treatment with ITC [risk ratio = 6.61 (2.01-21.75)] or with CMX [risk ratio = 5.11 (1.91-13.67)]). The prevalence of side effects was lower with ITC (6.4%) than with CMX (20.0%; p = 0.03).ConclusionsSince ITC induced earlier clinical cure and was better tolerated than CMX, such triazole should be considered the first-choice for PCM treatment.

Theoretical and experimental study of agricultural spraying using CFD

This paper presents a computational fluid dynamics (CFD) application about the axial fan design used in an agricultural spraying system with a theoretical and experimental analysis of comparative results between the characteristic curves of a fan for several rotations and numerical results for the influence of blade attack angle variation and optimization of the spraying system, both for a same rotation. Flow was considered three-dimensional, turbulent, isothermal, viscous and non-compressible in a steady state, disregarding any influence of the gravity field. The average turbulent field was obtained from the application of time average where the turbulence model required for closing the set of equations was the k-E model. Resolution of all connected phenomena was achieved with the help of a fluid dynamics computer, CFX, which uses the finite volumes technique as a numerical method. In order to validate the theoretical analysis, an experiment was conducted in a circular section of a horizontal wind tunnel, using a Pitot tube for pressure readings. The main results demonstrate that the methodology used, based on CFD techniques, is able to reproduce the phenomenological behavior of an axial fan in a spraying system because results were very reliable and similar to experimentally measured ones.

Population Dynamics and Growth Rates of Endosymbionts During Diaphorina citri (Hemiptera, Liviidae) Ontogeny

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Universality of Three-Body Systems in 2D: Parametrization of the Bound States Energies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface potentials of corona-charged ferroelectric P(VDF-TrFE) copolymer samples

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis of criteria for metabolic syndrome in a population-based study of Japanese-Brazilians

Objective: Criteria for metabolic syndrome (MS) differ particularly regarding the definition of central obesity and consequently, there could be differences in the assessment of cardiovascular risk. We estimated the prevalence of metabolic syndrome, compared the agreement of the World Health Organization (WHO) criteria with the standard and a modified National Cholesterol Education Program (NCEP) criterion and investigated whether additional factors were associated with the diagnosis of the syndrome in a Japanese descendant population.Methods: In this cross-sectional, population-based survey, 1166 Japanese-Brazilians (533 men, 633 women) aged 57.4 +/- 12.4 years with mean body mass index (BMI) and waist of 25.2 +/- 4.0 kg/m(2) and 84.5 +/- 10.6 cm, respectively, were included. McNemar and kappa statistics were used to assess the concordance between WHO criteria with the standard and a modified NCEP criteria (waist of 90 and 80 cm, for men and women, respectively). in logistic regression analysis, a number of metabolic variables and albumin-to-creatinine ratio were included to test independent associations with metabolic syndrome defined by the modified NCEP criteria.Results: According to WHO, 55.4% (95% Cl 52.5-58.2%) of the subjects had MS and to NCEP 47.4% (95% Cl 44.6-50.0%). WHO criterion detected 48.3% of central obese subjects while NCEP only 14.0%. Kappa statistics showed a good strength of agreement (k = 0.67, p < 0.01) between WHO and NCEP standard definitions of MS. Using the modified NCEP criterion for Asians, more subjects with metabolic syndrome were identified (58%) and agreement with WHO was improved (k = 0.72, p < 0.001). However, similar Framingham risk scores were attributed to the subsets of subjects classified by any of the three criteria. Areas under the receiver operating characteristic curves, obtained for the modified waist values to diagnose metabolic syndrome according to WHO, were > 0.80 and corresponded, respectively, to sensitivity and specificity of 63 and 83% for men and 77 and 72% for women. In final logistic regression model, age, male sex, BMI and homeostasis model assessment-insulin resistance but not with albumin-to-creatinine ratio (ACR) were independently associated with the syndrome.Conclusions: High prevalence of MS, independent of the criterion considered, was found in this Japanese-Brazilian population. The replacement of waist cutoff by those proposed by WHO for Asians lead to this diagnosis in a higher number of subjects with elevated cardiovascular risk. Our data did not support that ACR should be included in the classical definition of MS in Japanese descendants as previously suggested by WHO.

Phenotypic and functional evaluations of peripheral blood monocytes from chronic-form paracoccidioidomycosis patients before and after treatment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quantification of Flavonoids, Naphthopyranones and Xanthones in Eriocaulaceae Species by LC-PDA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)