Modelagem do resfriamento para a zona termicamente afetada pela soldagem de tubos de aço carbono

Because the high consumption of welded pipe for exploration and conduction oil and gas, optimization of manufacturing processes is necessary to obtain better productivity, efficiency and cost reduction. The objective of this study is to analyze the forms of heat transfer during the welding of pipes using longitudinal submerged arc process them to propose a model for the temperature distribution in the welded region. For this analysis are addressed as the heat transfer modes operate in the specified welding process and the necessary considerations for the mathematical model were obtained. The calculations were performed and the simulations needed to obtain the temperature distribution in the tube were carried out. Therefore, the practice was satisfactory and the results showed a range of temperatures along the pipe for a particular model and the future suggestions for improvement of this work

Espacialidade e ativismo social na zona leste de São Paulo: o caso do Coletivo Dolores Boca Aberta Mecatrônica de Artes

Pós-graduação em Geografia - IGCE

Determinação de áreas prioritárias para conservação na zona de amortecimento de UC de proteção integral: o caso da Estação Ecológica de Ribeirão Preto, SP

Observa-se como estratégia mundial para a conservação da biodiversidade a criação de unidades de conservação. No Brasil, especificamente no Estado de São Paulo, devido a intensa degradação da Mata Atlântica, verifica-se a criação de unidades de proteção integral, a fim de se preservar de modo restrito os recursos naturais que ainda lhe restam. Na cidade de Ribeirão Preto, uma região com alto desempenho agrícola e intensa expansão urbana, constata-se a presença de uma Estação Ecológica (EERP), fragmento florestal de 154,16 ha, altamente isolado e fragmentado. Assim, a EERP e sua zona de amortecimento (ZA) vêm sendo fortemente pressionada pela expansão urbana e agrícola da região, comprometendo a sua integridade ecossistêmica. Dentre os impactos negativos gerados destacam-se: alta especulação imobiliária e o intenso cultivo de monoculturas, que contribuem para a degradação do solo nas regiões do entorno. A fim de se reduzir tais impactos, o presente trabalho buscou apresentar um prognóstico de planejamento ambiental para a ZA da EERP, a qual se encontra altamente impactada, segundo os critérios definidos por Ranieri (2004). Desse modo, criou-se cenários ideais para a preservação dos recursos naturais do local

Distribuição de LNAPL na zona não saturada em solos tropicais, no município de Rio Claro/SP

Pós-graduação em Geociências e Meio Ambiente - IGCE

Hipertonicidade muscular e confecção de próteses totais pela técnica da zona neutra: relato de caso clínico

Introduction: the oral rehabilitation in edentulous patients using removable complete dentures is a classic treatment, easily accessible, and presenting satisfactory results. However, to succeed in this type of treatment, stability is an extremely important factor. The neutral zone technique for the production of complete dentures determines the oral cavity space for the positioning of teeth and denture base that provide a neutralization of the forces delivered by lips, cheeks, and tongue, providing better stability and retention of prostheses, which is indicated in cases with history of difficulties in adapting the conventional mandibular denture. Objective and case report: this paper aimed to describe a clinical case report of the oral rehabilitation of a patient with paraprosthetic muscles hypertonicity through removable complete dentures produced by the neutral zone technique, using condensation silicone. Final considerations: the use of condensation silicone for the development of the neutral zone technique showed to be a good alternative for the development of this clinical case, providing satisfactory stability and retention of the complete mandibular denture.

Reabilitação oral de paciente com sequela cirúrgica utilizando a técnica da zona neutra: relato de caso clínico

Objective and Case report: The purpose of this paper is to describe the neutral zone technique in a patient with oral deformity on the right labial commissure due to the resection of an oral cancer, enhancing the difficulty resulting from mouth limited opening and the use of tissue conditioner material to determine the neutral zone. Complete denture was obtained through this technique, providing good retention and stability which made functional rehabilitation feasible to patient of his or her masticatory function. Final considerations: The neutral zone technique in complete dentures will determine a specific intraoral area for tooth position and denture base contour where the forces generated by lips, cheeks and tongue are neutralized. The objective of this technique is to provide an alternative approach for patients who presented an historic instability of lower complete denture: atrophic ridge, oral deformities and also with disorder problems. An oral rehabilitation using this technique improves comfort to the patient providing retention and stability of mandibular complete dentures.

Estudo da influência da cinza de casca de arroz e da cal nas propriedades do solo-cimento auto-adensável

Pós-graduação em Engenharia Civil - FEIS

Indicadores antropométricos do estado nutricional entre idosas praticantes e não praticantes de exercício físico na zona norte de São José do Rio Preto-SP

Although the regular practice of physical exercise for the maintenance of the nutritional state and quality of life is important, it is not a common habit among the elderly, especially those of the lower income social bracket. The objective was to characterize and compare according to social-economic conditions and anthropometric indexes of the nutritional state of the elderly who regularly practice and those who do not practice exercises, offered at no cost, in the Northern zone of São José do Rio Preto-SP. In this study, 110 elderly women participated, of which 60 (group P) exercised regularly and 50 did not (group NP). Group P participated in a special gym program, free of charge, for at least 2 years, 2 to 3 times a week, one hour a day. Group NP was recruited from the same location as Group P. The comparison between the groups of elderly women was proportionately distributed according to marital status, level of education, means of locomotion, results of body mass index (IMC), waist to hip ratio (RCQ) and calf circumference, using the chi-square test. Comparisons were also made of average age, per capita family income, individual income, IMC, arm and triceps skin fold measured by t-Test. Differences were not found in all the comparisons made. The variables that stood out were the IMC (overweight) and RCQ (risk of chronic diseases) results, which were above what was expected, and the high frequency of walking and riding buses for both groups of elderly women (about 60%). We came to the conclusion that the low-intensity exercise program evaluated made no difference in the nutritional profi le of the elderly who also used walking as a means of getting around.

Análise temporal da cobertura do solo na zona de amortecimento de reserva biológica

The Municipal Biological Reserve of Serra do Japi shelters an important forest remnant of Atlantic Rainforest in the state of São Paulo. For its ecological importance, were created instruments for environmental and territorial management of the Conservation Unit, with the regulation of the use and occupation of the land in its Buffer Zone (BZ) in 2004. The objective of this study was to analyze the evolution of the land cover in the BZ region of the Municipal Biological Reserve of Serra do Japi in Jundiaí-SP, between 1989 and 2010. It was used in this study the image analysis of the satellite LANDSAT-TM5, with the help of software ILWIS and IDRISI. The results showed that urban occupation has increased 37.47% and the agro pastoral and reforestation areas have decreased 36.62% and 72.22% respectively, while forest areas have increased 49.57%. However, the relative importance of the forest area in BZ ranged from 46.60% in 1989 to 69.71% in 2010, leading to the conclusion that this region was favored by changes in land cover in the period evaluated, despite strong pressure for urban expansion in its surroundings.

A Zona Franca de Manaus sob a perspectiva do desenvolvimento histórico-econômico da Amazônia brasileira ocidental (2002-2014)

Dada a atual importância ambiental e econômico-política da Amazônia, busca-se analisar e compreender a totalidade da Zona Franca de Manaus (ZFM) em relação à Amazônia Ocidental, à Amazônia Brasileira, ao Brasil, aos outros países amazônicos e à Comunidade Internacional, sob os âmbitos histórico-econômico, ambiental, político e social. A escolha da Zona Franca de Manaus como recorte se deve à forma pontual com que este projeto geopolítico se desenvolveu gerando um pólo industrial regional/nacional/internacional e, simultaneamente, evitando a exploração e devastação da floresta amazônica ocidental. A escolha do período de 2002 a 2014 se dá em função da necessidade de um maior aprofundamento de análise somada ao fato de que a República Federativa do Brasil se encontra - neste período - sob a mesma linha diretiva política, evidenciando assim a necessidade de pesquisar o que tem sido feito na ZFM pelo Partido dos Trabalhadores (PT) nos governos de Luís Inácio Lula da Silva (2003-2010) e Dilma Roussef (2011-2018). Os dados têm mostrado que a ZFM busca estar em consonância com o Governo Federal à medida que esta tem investido em instituições locais de ciência, tecnologia e inovação (como por exemplo o Centro de Biotecnologia da Amazônia - CBA), buscando internacionalizar a indústria local, assim como interiorizar o desenvolvimento para a região

Zonas Estratégicas e Estruturais para os Trânsitos Ilícitos (ZEETI): desafios à zona de paz na América do Sul

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Correlações entre zona de estiramento e tenacidade à fratura para aço 15-5PH

This work includes a study on the stretch zone and the influence of the toughness conditions at fracture in size and appearance. It was done a literature review about material properties, fracture mechanics concepts, definitions and formation of stretch zone, importance of tenacity for structural calculation, methods and standards to measure the toughness of metallic material fracture and presents the method used in microscopy. After the literature review were carried out identification and measurements of stretch zones of proof bodies were made through confocal optical microscopy and then analyzed the results in order to find relationships between the values obtained with the theory