Análise da presença de vírus em alho semente da segunda e quarta gerações, produzidos por termoterapia e cultura de tecido

The garlic (Allium sativum L.) can be naturally infected by a complex of filamentous viruses belonging to the genera Potyvirus, Carlavirus and Allexivirus. Accumulation of these viruses occurs especially by vegetative propagation through cloves. As the cultivated garlic plant does not produce true seed worldwide, virus-free plants can only be obtained by tissue culture of stem apices and thermotherapy. Using these techniques, garlic seeds were produced at the School of Agricultural Sciences - UNESP, Botucatu, and evaluated by RT-PCR for the presence of potyvirus, carlavirus and allexivirus. In the second generation of microcloves propagated in a greenhouse, 6.6% infection was detected, only by allexivirus. In the fourth generation, however, there was 60% incidence by allexivirus, 35% by potyvirus and all negative by carlavirus. The high rate of infection by allexivirus may be related to the greater difficulty of removing the species of viruses belonging to this genus, as observed by other authors, and also based on the infection and transmission of the virus by the mite, Aceria tulipae, during the storage of bulbs from one year to the other. The garlic at the fourth generation corresponds to cloves weighed less than 1 gram and not selected for commercial multiplication. Selection for the size of cloves has a positive effect on the choice of cloves with lower rates of viral infection, as the technique of thermotherapy and tissue culture do not eliminate the virus completely. Results also emphasize the need of fumigation for the garlic seed stored from one year to the other in order to prevent the transmission of allexivirus during storage.

Propagação de variedades de caramboleira por estaquia herbácea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Clonagem de canistel por estaquia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise técnica e econômica das etapas de produção de mudas de eucalipto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Carvão (Sporisorium scitamineum) e podridão-abacaxi (Ceratocystis paradoxa) em cana-de-açúcar (Saccharum spp.): uma revisão

Sugarcane (Saccharum sp.) is an important grass cultivated in tropical and subtropical regions of the world, such as in Br, Ind, and Ch, and has its biomass being raw material for production of sugar, fuel ethanol, and some other derivatives. Fungal diseases infect sugarcane fields worldwide, damaging crops and thus, causing great economic losses. Fungal specialized structures act during all Pathogen-Host Relationship Cycle (PHRC) (survival, dissemination, infection, colonization, and reproduction of pathogen), maintaining fungal populations in cultivation soil, infecting plants in following crops and vegetative propagation of sugarcane by infected seeds may allow fungal transportation into regions where diseases haven’t occured before. Biotechnological methods and approaches have significantly contributed to understanding of the relationship among parasite and host, as to diseases management (control, detection, and prevention). Some techniques have daily applications in Agriculture, while others are only used in research and to breeding of host resistant varieties. Among notable diseases, smut (Sporisorium scitamineum) and pineapple disease (Ceratocystis paradoxa) are important because they cause damage and losses in sugarcane regions, although there are different periods for each one to occur. This work aims to review the PHRC for each patosystem, the biotechnological methods and approaches and its perspectives in the study and management of these diseases. As environment is an important factor to the effectiveness of PHRC, one chapter is dedicated to Global Climate Change (GCC) and its possible influences over these diseases in a longterm period

Tecnologias para produção de mudas de espinheira-santa: propagação vegetativa por estacas caulinares

Pós-graduação em Agronomia (Horticultura) - FCA

Doses e modos de aplicação de boro na produção de mudas de nespereira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Can hydrogen peroxide and quercetin improve production of Eucalyptus grandis x Eucalyptus urophylla?

Vegetative propagation is considered the best choice for the rapid multiplication of plant species, however, rooting may still present difficulties. Substances, such as auxins, phenolic compounds and hydrogen peroxide, are recognized as able to improve this process. The aim of the present work was to determine if hydrogen peroxide in combination with quercetin or indole butyric acid, can modify some characteristics related to rooting and development in cuttings of Eucalyptus grandis x Eucalyptus urophylla. Cuttings were periodically evaluated at 30, 60 and 90 days according to the following criteria: height, diameter and survival percentage. After planting (90 days), a destructive evaluation was performed to determine rooting percentage, average size and number of roots. Polyamines content and polyamine oxidase activity, as biochemical markers of plant development, were determined. No statistically significant differences in height, diameter, survival and rooting percentage, root length and number of roots per cuttings were found. Treatments induced a decrease in putrescine levels and polyamine oxidase activity in roots. For absence of positive responses, the use of these substances as a treatment to improve cutting production is economically unviable.

Propagation of Camptosema grandiflorum native to Brazil by seeds and cuttings

Camptosema grandiflorum Benth., belonging to Fabaceae, is a voluble climber plant native to Brazil. Plants bloom in autumn-winter, producing long and hanging inflorescences with showy red flowers, which are much visited by hummingbirds. The leaves are also attractive, composed by three leaflets. It can be propagated by seeds or cuttings, but both seed germination and cutting rooting percentages are very low. Thus, the objective of this work was to study the effect of different temperatures on seed germination and of different indolebutyric acid (IBA) concentrations on the rooting of cuttings of C. grandiflorum. The experiment was set up at the São Paulo State University, located in Jaboticabal, São Paulo State, Brazil. The germination study was conducted in an entirely randomized design with six different temperatures (constant at 20, 25, 30 and 35°C; and alternated at 20-30 and 25-35°C, with a photoperiod of 12 hours) and four replications of 25 seeds each, placed in plastic boxes with vermiculite. The percentage of germination and the speed germination index (SGI) were evaluated. An entirely randomized block design was adopted for the cutting rooting evaluation, with four IBA concentrations (0; 1,000; 2,000; and 3,000 mg kg-1) and five replications of ten cuttings each, comprising 200 cuttings. After 30 days from the beginning of the rooting experiment, data referring to rooting percentage, number and length of roots and dry weight of roots were collected. For the seed germination experiment, fastest germination and highest germination percentage (87%) were obtained when seeds were maintained under the constant temperature of 30°C. For the cutting experiment, the concentrations of 2,000 and 3,000 mg kg-1 of IBA promoted the highest rooting percentages (98.5 and 94.1%, respectively) and number of roots. There were no statistical differences among the IBA concentrations for length of roots and dry weight of roots.

Evaluation and development of passion fruit (Passiflora alata Dryander) propagated by cutting and seet in conditions of commercial orchard

The present work was conducted in a fruit tree propagation area of the Plant Production Department of the Faculdade de Ciencias Agrarias e Veterinarias, Universidade Estadual Paulista (FCAV/UNESP) in Jaboticabal, SP, and also in a commercial orchard in Araguari, MG, with the objective to verify the potential of vegetative growth (stem diameter, height of plants and leaf number) of plants of passion fruit (Passiflora alata Dryander), gotten by cutting and seed, comparing the initial development of plants in the field. This experiment was carried out from January 2002 to February 2003. The experiment using seeds was conducted at a shadow house, and the one that used cuttings in an intermitent mist. The cuttings and seeds were collected from adult plants which came from Passifloraceae Active Germoplasm Bank (BAG) of the Plant Production Department of FCAC/UNESP. For the cuttings, it was used the intermediate part of the branches in stadium of vegetative growth. The seeds, in order to obtain the seedlings, had been sown in plastic trays. Cuttings and seedlings were transplanted to plastic bags with substrate in shadow house and with daily irrigation. They were acclimatized and planted on field, after 60 days. on field, the stem diameter, plant height and number of leaves were better for cuttings than for seedlings in Jaboticabal, SP. In Araguari, MG, stem diameter was larger in the seedlings, which plant heights and number of leaves were larger on cuttings.

Métodos de propagação do porta-enxerto 'Okinawa' e espaçamentos: efeitos no diâmetro do tronco, fenologia e produção de gemas em pessegueiros 'Aurora-1'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produtividade de pessegueiros 'Aurora-1' em diferentes espaçamentos e métodos de propagação do porta-enxerto 'Okinawa'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resistência de pimentas a nematóides de galha e compatibilidade enxerto/porta-enxerto entre híbridos de pimentão e pimentas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Attitude propagation using non-singular canonical variables

Three sets of non-singular canonical variables for the rotational motion are analyzed. These sets are useful when the angle between z-axis of a coordinate system fixed in artificial satellite ( here defined by the directions of principal moments of inertia of the satellite) and the rotational angular momentum vector is zero or when the angle between Z-inertial axis and rotational angular momentum vector is zero. The goal of this paper is to compare all these sets and to determine the benefits of their uses. With this objective, the dynamical equations of each set were derived, when mean hamiltonian associate with the gravity gradient torque is included. For the torque-free rotational motion, analytical solutions are computed for symmetrical satellite for each set of variables. When the gravity gradient torque is included, an analytical solution is shown for one of the sets and a numerical solution is obtained for one of the other sets. By this analysis we can conclude that: the dynamical equation for the first set is simple but it has neither clear geometrical nor physical meaning; the other sets have geometrical and physical meaning but their dynamical equations are more complex.

The surface treatment influence on the fatigue crack propagation of Al 7050-T7451 alloy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)