Influência do número kappa, dos ácidos hexenurônicos e da lignina no desempenho da deslignificação com oxigênio

This study aimed at determining the effect of kappa number, lignin and hexenuronic acid contents on oxygen stage performance. Industrial brown pulps produced by the ITC and KobudoMARI cooking technologies, of kappa number and HexA's contents varying in the range of 10-21.7 and 23.2-56.7 mmol/kg, respectively, were collected in a period of 6 months and delignified with oxygen under fixed conditions. Kappa number was fractionated into lignin and hexenuronic acid and each fraction correlated with oxygen stage performance. It was concluded that O-stage efficiency, selectivity and yield does not correlate significantly with kappa number, lignin or hexenuronic acid contents for the ITC and KobudoMARI pulps at 5% of significance.

Acurácia do teste de escada utilizando o consumo máximo de oxigênio como padrão-ouro

Objective: To determine the accuracy of the variables related to the fixed-height stair-climbing test (SCT) using maximal oxygen uptake (V̇O 2 max) as the gold standard. Methods: The SCT was performed on a staircase consisting of 6 flights (72 steps; 12.16 m total height), with verbal encouragement, in 51 patients. Stair-climbing time was measured, the variables 'work' and 'power' also being calculated. The V̇O2 max was measured using ergospirometry according to the Balke protocol. We calculated the Pearson linear correlation (r), as well as the values of p, between the SCT variables and V̇O2 max. To determine accuracy, the V̇O 2 max cut-off point was set at 25 mL/kg/min, and individuals were classified as normal or altered. The cut-off points for the SCT variables were determined using the receiver operating characteristic curve. The Kappa statistic (k) was used in order to assess concordance. Results: The following values were obtained for the variable 'time': cut-off point = 40 s; mean = 41 ± 15.5 s; r = -0.707; p < 0.005; specificity = 89%; sensibility = 83%; accuracy = 86%; and k = 0.724. For 'power', the values obtained were as follows: cut-off point = 200 w; mean = 222.3 ± 95.2 w; r = 0.515; p < 0.005; specificity = 67%; sensibility= 75%; accuracy = 71%; and k = 0.414. Since the correlation between the variable 'work' and V̇O2 max was not significant, that variable was discarded. Conclusion: Of the SCT variables tested, using V̇O2 max as the gold standard, the variable 'time' was the most accurate.

Efeitos de diferentes frações inspiradas de oxigênio sobre a dinâmica respiratória em cães submetidos à infusão contínua de propofol e mantidos em ventilação espontânea

The effects of several inspired oxygen fractions (FiO 2) on the respiratory dynamics in spontaneously breathing dogs submitted to continuous infusion of propofol were evaluated. Eight adult mongrel dogs were used. Each animal underwent five anesthesias, in each procedure the patient was allowed to breath a different FiO 2, thereby resulting in five groups, namely: G100 (FiO 2 = 1), G80 (FiO 2 = 0.8), G60 (FiO 2 =0.6), G40 (FiO 2 = 0.4), and G20 (FiO 2 = 0.21). To induce anesthesia, propofol was given until the animals allowed orotracheal intubation, followed by immediate continuous infusion of drug. The initial measurement (M0) was recorded thirty minutes after the infusion of propofol has begun. Additional recordings were performed at 15 minute intervals for 60 minutes (M15, M30, M45 and M60). Numeric data were submitted to Analysis of Variance followed by Tukey Test (p<0.05). We recorded significantly lower values of SpO 2 and SaO 2 at G20, whereas PaO 2 varied according to the changes in oxygen. Regarding PaCO 2, the mean of G100 was greater than G20 at M30. However, spontaneously breathing dogs anesthetized with propofol at the rate of 0.7mg/kg/min should not be provided with 100%, 80%, and 21% oxygen owing to the significant compromise of respiratory system.

Compostagem de resíduos sólidos de frigorífico

Composting has been a viable and efficient alternative treatment to agroindustrial waste. This experiment was installed with the objective of analyzing the process of composting for slaughterhouse waste. Twelve piles of composting were prepared, using slaughterhouse waste, wheat straw and wood sawdust. The process was evaluated by daily temperature monitoring, observations of the occurrence of undesirable parameters (bad smell and/or ammoniacal smell, grease formation and presence of grubs and flies), as well as the capacity of recycling nutrients. The undesirable parameters were observed, on average, for the first five days after pile building; the temperatures increased, reaching 70 °C; chemical composition of compost showed relevant contents of macro and micronutrients, a high recycling potential. Utilization of impermeable floor and roof are recommended during the composting. The turning frequency used (15 days after pile building followed by turning) was adequate. The best relation of weight was 7.2 kg of waste for each kg of straw and 16.6 kg of waste for each kg of sawdust.

Influencia de la separación de residuos sólidos urbanos para reciclaje en el proceso de incineración con generación de energía

This work analyses the recuperation of the energy of Municipal Solid Waste (MSW) through the incineration process. It considers the up to date tendency of segregation (separation) of plastic, paper and cardboard, glass and metals and their influence in the fluxes of mass and energy in the incineration system of MSW. For its development was used information related to the generation of MSW in Bauru city and the Combust software. The results so obtained allowed the estimation of the Caloric power of the typical MSW and also of this residue when one considers the separations of paper/cardboard and plastic for recycling.

Energia de briquetes produzidos com rejeitos de resíduos sólidos urbanos e madeira de Eucalyptus grandis

The incentive for consumption and production in large quantity in modern society generates enormous amounts of urban solid residues in the form of municipal solid waste (MSW). With the intention of reducing these residues of the municipal waste tips and to generate energy, briquettes with mixtures of MSW and residues of Eucalyptus grandis were produced. The briquettes were manufactured with 0, 5, 10, 15, 20 and 25% of MSW in the mixture with wood waste and 12% of moisture content. The analyzed parameters used to choose the best treatments were combustion analysis versus ash content, mechanical strength and energy content. The briquettes up to 10% of MSW showed low resistance, and above 15% showed large increase in ash content. Therefore, the treatment that fulfilled the requirements for combustion versus ash content and mechanical resistance was of at least 15% of MSW, since the source of the ash is unidentified. Considering the net energy content, the best treatment was 25% of MSW, with 17,175 kJ kg-1. Nevertheless, it is strongly advised that further studies related to gas emissions are necessary.

Revisando os efeitos da concentração de oxigênio sobre o desenvolvimento embrionário

Despite the fact that the processes of embryo development and implantation of mammals do not occur in atmospheric tension in vivo, it is common practice in laboratories for in vitro fertilization (IVF) the culture of embryos in an oxygen tension of 20%. The discrepancy between the tensions of oxygen leads to important discussions about their effects in vitro embryo development. It is believed that the culture of embryo in atmospheric oxygen tension can be detrimental to the quality of the data for predisposing them to the negative interference of reactive oxygen species (ROS), resulting in oxidative stress, leading to deleterious effects on metabolism embryo gene expression and blastocysts grown in those conditions. Faced with arguments for and against the culture of embryos in vitro oxygen tensions similar to those found in vivo, this revies article aims to condense and discuss the literature concerning the influence of oxygen tension on the quality of in vitro culture.

Indicadores para a gestão de resíduos sólidos em aeroportos e sua aplicação no Aeroporto Internacional de Viracopos, Campinas, São Paulo

Taking into account the current context about environmental concern, the main purposes of this research were to develop and apply indicators in order to evaluate waste residues management in airports. As a result, 17 indicators related to generation, storage, transportation, collection, and solid waste disposal were created. These were applied in Viracopos International Airport, in Campinas, São Paulo State, Brazil. The results obtained in the study had a 2.9 performance, in a scale from one to five, characterized as regular. Posteriorly, the main weaknesses in waste residues management were analyzed in such Airport, as well as good practices and solutions were identifed. The highlighted management strategies suggested were the adjustment of areas for waste storage, recycling, and residues composting.

Caracterização geofísica em aterro de resíduos sólidos para avaliação de condicionantes de instabilidade geotécnica

The disposal of solid waste can create environmental problems, in addition to the potential risk of instability even in planned geotechnical works, such as provisions in stacks or high ends of the landfill, because they represent mere adjustments in civil engineering works. The Leme city, SP, generates about 35 t/day of municipal waste, that are deposited in a landfill located in the Barro Preto neighborhood. This work conducted a geophysical survey, based on geotechnical instability evidence in area, for analysis of the conditioners that cause on the sides leachate resurgence landfill and its relationship to mass movements and ravines installation in cover soil, with consequent waste exposure. The results indicate horizons of low resistivity connected with resurgence points generated by the organic matter decomposition contained in the waste. Such horizons result in leachate concentration in some places, which, in turn, may lead to loss of cohesion of the materials constituting the residues mass. The results are areas with mass flow by rotational movements, which, together with the surface flow of rainwater, evolves into ravines and exposed residues, preferably at the resurgence point. The leachate flow on the surface affects areas beyond the limits at landfill with direct impact on local agriculture and risk to pedestrians using the highway bordered by the landfill beyond the soil and the local aquifer.

Desempeño de tanques decantadores de sólidos en un sistema de recirculación para producción de tilapia

To compare the removal efficiency of solids, turbidity and apparent color between a conventional and a column settling tanks in a recirculating aquaculture system (RAS) for tilapia farming. Materials and methods. Tilapia with a stocking density between 30 and 33 kg/m3 were cultured in a RAS consisting of a water level control box, PVC piping system, three plastic tanks for culture, conventional horizontal flow settling tank (Con.ST), column vertical flow settling tank (Col.ST), three phase fluidized bed reactor, oxygen transfer reactor, air compressor, air blower, centrifugal pump. The Con.ST operated at a volume of 1.4 m3 and hydraulic retention time (HRT) of 2.94 h; and was drained weekly for washing and sludge collection, representing a 55%discharge of system water volume. The Col.ST operated with a volume of 0.30 m3 and HRT of 0.553 h. Three daily partial draining operations were executed, representing a discharge of 50% of the system volume. Results. The mean solids removal efficiencies were: 34.01 and 44.44%for total solids; 64.45 and 71.71% for suspended solids; 21.10 and 45.65% volatile solids; 65.51% and 62.79% for turbidity; and 56.37 and 50.91% for apparent color, respectively for Con.ST and Col.ST. Conclusions. The two settling devices are useful on removal of the studied parameters and presented similar performance on turbidity and apparent color removal; however, the Col.ST was more efficient than Con.ST for solids removal, requires less space, less volume and requires less discharge water volume, displaying feasibility for its use on RAS.

Eficiência agronômica de fertilizantes organominerais sólidos e fluidos em relação à disponibilidade de fósforo

Pós-graduação em Agronomia (Agricultura) - FCA

Intensificação do cultivo de Macrobrachium amazonicum: efeito das estratégias de estocagem e despesca na água dos viveiros, efluentes e sedimentação em viveiros de crescimento final

Pós-graduação em Aquicultura - FCAV

Validação de um teste específico para determinação do máximo déficit acumulado de oxigênio (MAOD) e da máxima fase estável de lactato em nado atado

Pós-graduação em Fisioterapia - FCT

Efeitos do exercício prévio de intensidade supramáxima sobre a cinética do consumo de oxigênio em ciclistas treinados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação do modelo de potência crítica na cinética do consumo de oxigênio em exercício supramáximo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)