Effectiveness of six different disinfectants on removing five microbial species and effects on the topographic characteristics of acrylic resin

Purpose: The aim of this study was to evaluate the effectiveness of disinfectant solutions (1% sodium hypochlorite, 2% chlorhexidine digluconate, 2% glutaraldehyde, 100% vinegar, tabs of sodium perborate-based denture cleanser, and 3.8% sodium perborate) in the disinfection of acrylic resin specimens (n = 10/group) contaminated in vitro by Candida albicans, Streptococcus mutans, S. aureus, Escherichia coli, or Bacillus subtilis as measured by residual colony-forming unit (CFU). In a separate experiment, acrylic resin was treated with disinfectants to monitor potential effects on surface roughness, Ra (μm), which might facilitate microbial adherence. Materials and Methods: Three hundred fifty acrylic resin specimens contaminated in vitro with 1×10 6 cells/ml suspensions of standard strains of the cited microorganisms were immersed in the disinfectants for 10 minutes; the control group was not submitted to any disinfection process. Final counts of microorganisms per ml were performed by plating method for the evaluation of microbial level reduction. Results were compared statistically by ANOVA and Tukey's test (p ≤ 0.05). In a parallel study aiming to evaluate the effect of the tested disinfectant on resin surface, 60 specimens were analyzed in a digital rugosimeter before and after ten cycles of 10-minute immersion in the disinfectants. Measurements of superficial roughness, Ra (μm), were compared statistically by paired t-test (p ≤ 0.05). Results: The results showed that 1% sodium hypochlorite, 2% glutaraldehyde, and 2% chlorhexidine digluconate were most effective against the analyzed microorganisms, followed by 100% vinegar, 3.8% sodium perborate, and tabs of sodium perborate-based denture cleanser. Superficial roughness of the specimens was higher after disinfection cycles with 3.8% sodium perborate (p = 0.03) and lower after the cycles with 2% chlorhexidine digluconate (p = 0.04). Conclusion: Within the limits of this experiment, it could be concluded that 1% sodium hypochlorite, 2% glutaraldehyde, 2% chlorexidine, 100% vinegar, and 3.8% sodium perborate are valid alternatives for the disinfection of acrylic resin. © 2008 by The American College of Prosthodontists.

On stability of differential equations with piecewise constant argument using dichotomic maps

This paper deals with the study of the basic theory of existence, uniqueness and continuation of solutions of di®erential equations with piecewise constant argument. Results about asymptotic stability of the equation x(t) =-bx(t) + f(x([t])) with argu- ment [t], where [t] designates the greatest integer function, are established by means of dichotomic maps. Other example is given to illustrate the application of the method. Copyright © 2011 Watam Press.

Coincidences of self-maps on Klein bottle fiber bundles over the circle

The main purpose of this work is to study coincidences of fiber-preserving self-maps over the circle S 1 for spaces which are fiberbundles over S 1 and the fiber is the Klein bottle K. We classify pairs of self-maps over S 1 which can be deformed fiberwise to a coincidence free pair of maps. © 2012 Pushpa Publishing House.

The Lamination of Infinitely Renormalizable Dissipative Gap Maps: Analyticity, Holonomies and Conjugacies

Motivated by return maps near saddles for three-dimensional flows and also by return maps in the torus associated to Cherry flows, we study gap maps with derivative positive and smaller than one outside the discontinuity point. We prove that the lamination of infinitely renormalizable maps (or else maps with irrational rotation numbers) has analytic leaves in a natural subset of a Banach space of analytic maps of this kind. With maps having Hölder continuous derivative and derivative bounded away from zero, we also prove Hölder continuity of holonomies of the lamination and also of conjugacies between maps having the same combinatorics. © 2011 Springer Basel AG.

Correlative light-electron fractography for fatigue striations characterization in metallic alloys

The correlative light-electron fractography technique combines correlative microscopy concepts to the extended depth-from-focus reconstruction method, associating the reliable topographic information of 3-D maps from light microscopy ordered Z-stacks to the finest lateral resolution and large focus depth from scanning electron microscopy. Fatigue striations spacing analysis can be precisely measured, by correcting the mean surface tilting with the knowledge of local elevation data from elevation maps. This new technique aims to improve the accuracy of quantitative fractography in fatigue fracture investigations. Microsc. Res. Tech. 76:909-913, 2013. © 2013 Wiley Periodicals, Inc.

Geotecnologias aplicadas à estimativa de perdas de solo por erosão hídrica na sub-bacia do Ribeirão das Perobas, Município de Santa Cruz do Rio Pardo-SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Processamento digital de fotografias aéreas para análise do uso do solo

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Fractografia quantitativa: análise do comportamento fractal de fratura em compósitos carbono/epóxi, por processamento digital de imagens

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Geotecnologias no mapeamento da aldeia Tekoa Pyau - São Paulo/SP e seu entorno: experiências de aplicação de técnicas cartográficas e sistemas digitais em ações de parceria com jovens indígenas

Pós-graduação em Geografia - IGCE

O relevo e o sistema de afastamento e tratamento de esgoto da cidade de Marília-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vulnerabilidade Ambiental aos processos erosivos lineares nas áreas rurais do município de Presidente Prudente-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapeamento geomorfológico da Ilha do Maranhão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapa de vulnerabilidade à erosão da região do Alto Rio Pardo - Pardinho (SP)

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Hydromorphic Soil, Topographic Depression and Vegetation Development History by Using 13c and 14c In Rondônia State (sw Brazilian Amazon)

13C e 14C obtidos da matéria orgânica do solo foram usados para diferenciar fases de flutuação da vegetação em transição floresta-savana. A região apresenta baixos platôs com depressões topográficas imperfeitamente drenadas na superfície. Na topossequência estudada foram analisados solos de cinco perfis localizados sob floresta (F), transição floresta-savana (S1), borda da depressão sob savana (S2) e centro da depressão sob savana (S3). Os valores de 13C e idades evidenciam que a ~ 200cm de profundidade, com idades entre ~ 12.000 e 10.000 A.P., valores de -27‰ a -27,7‰ indicam vegetação de floresta (C3) em todos os perfis. Na profundidade de 100 cm, com idades entre ~ 6.000 e 5.000 A.P., houve enriquecimento de – 20,2‰ a -22,3‰, indicando regressão da floresta e expansão da savana. Valores entre -15,9 e -18,7‰ a 50-60 cm, estimado entre ~ 4.700 a 3.800 A.P., sugere máxima expansão da vegetação C4 em resposta às condições climáticas mais secas, exceto no perfil S3 com valores mais empobrecidos (-20,9‰), sugerindo que na depressão, o desenvolvimento da hidromorfia possibilitou a presença de espécies de gramíneas C3 e C4 da savana em resposta as mudanças das condições ambientais.

Optimization of the sampling scheme for maps of physical and chemical properties estimated by kriging

The sampling scheme is essential in the investigation of the spatial variability of soil properties in Soil Science studies. The high costs of sampling schemes optimized with additional sampling points for each physical and chemical soil property, prevent their use in precision agriculture. The purpose of this study was to obtain an optimal sampling scheme for physical and chemical property sets and investigate its effect on the quality of soil sampling. Soil was sampled on a 42-ha area, with 206 geo-referenced points arranged in a regular grid spaced 50 m from each other, in a depth range of 0.00-0.20 m. In order to obtain an optimal sampling scheme for every physical and chemical property, a sample grid, a medium-scale variogram and the extended Spatial Simulated Annealing (SSA) method were used to minimize kriging variance. The optimization procedure was validated by constructing maps of relative improvement comparing the sample configuration before and after the process. A greater concentration of recommended points in specific areas (NW-SE direction) was observed, which also reflects a greater estimate variance at these locations. The addition of optimal samples, for specific regions, increased the accuracy up to 2 % for chemical and 1 % for physical properties. The use of a sample grid and medium-scale variogram, as previous information for the conception of additional sampling schemes, was very promising to determine the locations of these additional points for all physical and chemical soil properties, enhancing the accuracy of kriging estimates of the physical-chemical properties.