Elaboração de procedimento avaliativo-terapêutico computadorizado para escolares com dificuldades de aprendizagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos da vibração simultânea nas propriedades mecânicas de juntas de aço ASTM A131 soldadas pelo processo arame tubular (FCAW)

Pós-graduação em Engenharia Mecânica - FEG

Desenvolvimento de um tribômetro, tipo cilindro sob disco, para ensaios tribológicos em formulações com óleos vegetais

Pós-graduação em Engenharia Mecânica - FEIS

Procedures to Evaluate the Efficiency of Protective Clothing Worn by Operators Applying Pesticide

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do fortalecimento muscular na independência funcional de indivíduos parkinsonianos

Introduction: Parkinson’s disease is a chronic disease of the nervous system that leads to a clinical picture of resting tremor, bradykinesia, muscular rigidity and postural instability. These symptoms, in turn, directly influence the functional independence of the individual. Objective: To analyze the influence of muscle strengthening on functional independence of individuals with Parkinson’s disease. Method: A total of ten subjects of both genders participated in this study. We evaluated the functional independence, strength of lower limbs, grip strength testing and 1 repetition maximum. After the evaluation was performed muscle building program for 12 weeks. Results: There was improvement of functional independence (p = 0.007) and lower limb strength (p = 0.01), as well as an increase in grip strength, both of the dominant hand (p = 0.007) and the non-dominant one (p = 0.02). Conclusion: The muscle strength improved the functional independence of individuals with PD.

Identificação de áreas sujeitas a processos erosivos na área urbana do município de Aparecida, SP

Historically, in Brazil, the process of urbanization and city growth was due to the intense migration of rural population to urban areas, especially in the last thirty years. This move, combined with a lack of planning, allowed the occupation of areas with potential for occurrences of erosion. The city of Aparecida, SP can be cited as an example of this process. These irregular occupations generate large material damage and human losses conditioned on mass movement of soil, resulting from the development of erosive processes. So, it is of great importance to physical characterization and identification of these areas within the same city map as a way to minimize the effects and mitigate the consequences of events. Thus, this work presents a series of graduate field campaigns, geotechnical laboratory testing and consultation with representative maps of the physical environment, as a means conclusive for delimintation of areas with potential risk for the occurrence of erosion, especially in areas undergoing urban expansion of the city Aparecida, SP. These areas were determined some geotechnical properties of soils present, evaluating the potential erodibility of them. Also presented are the descriptions of the main characteristics of these areas identified as being at risk, along with proposals to avoid or minimize the impact of problems related to erosion processes on the local population

Ensaios não destrutivos: metrologia e calibração

To perform the quality control of various industries like: petrochemical, nuclear, aerospace, steel, shipbuilding, pulp and paper, and inspection of welded products, castings, forgings, rolled products, among others, used the method of Non-Destructive Testing (NDT). The method is based on the physical properties of the material, so selecting a procedure more appropriate. The company Inter-Metro Serviços Especiais Ltda., with its cutting-edge laboratory, dedicated to the implementation of calibration services and measurement equipment for industrial, medical, occupational safety and Non-Destructive Testing (NDT). It has a trained team, providing guidance and providing support for improving procedures for testing and measuring

Carta geológico-geotécnica aplicada ao planejamento urbano da região do Córrego Bertini, município de Americana - SP

This paper focuses on the implementation of a geological and geotechnical mapping to the planning of the region stream Bertini, territorial expansion area of the municipality of Americana (SP), a medium-sized city in the countryside of Sao Paulo state, with great potential for growth industrial and residential. To this end, based on the methodology established by the Institute for Technological Research, the charters geological and geotechnical aimed at exposing the capabilities and limitations of the soil. The analysis of similar soil characteristics such as geology, geomorphology, slope, geotechnical testing and the current use and land cover was possible to recognize four geotechinical units. The units I and III are related to areas of top and concave and convex parts of the study area, shown to be sites of low occupancy restriction. However the units II and IV, respectively allocated in the floodplain of the Piracicaba River and the banks of the stream Bertini and some of its drainage, showed a more restricted area due to proximity to water bodies and drainages that offer higher slopes.

Otimização de procedimentos de controle de qualidade em equipamentos radiográficos convencionais do Instituto de Eletrotécnica e Energia - USP

Radiography is currently an important method of diagnosis, both medical, dental and veterinary. The image in this type of survey is obtained using an X-ray beam, where the radiologist can possibly view structures of interest. It isn't always possible to get the desired images due to various factors, such as equipment limitations. The Administrative Law 453/98, the State Resolution SS 625/94, and other standards require testing and quality control acceptance limits that guarantee a good performance of the equipment for the security and quality of care, giving service users greater effectiveness in exams. This study were performed in the accompaniment of testing procedures for quality control established by Administrative Law 453/98 in several X-ray equipment to make a comparison and optimization in the descriptions of the procedures used by the Institute for Electrical Energy and the University of São Paulo (IEE / USP / SP).The optimization of the procedures were performed with the aid of a current literature, the Resolution 453/98, State Resolution SS 625/94 and other international standards. On this basis it was possible to observe the importance of regular monitoring of tests for an update, following the technological development of instruments used in the service

Testes de Controle de Qualidade em Sistema de Processamento Computadorizado FUJI

Computed Radiography (CR) is a term used to describe the system that electronically records a radiographic image. CR systems use receivers or IP (imaging plate) to capture the analog signals and then allow the readers to do the image processing and converted into digital information. With the increasing expansion of the CR for medical diagnostics it is necessary that these systems receive the same type of monitoring related to Quality Control and Acceptance to the conventional processing systems. The current legislation fails to specify the parameters and procedures to be tested, allowing that somehow, some equipment is not fully able to use in clinical routine. In this project we used the standard AAPM Report Number 93, which is already fully established outside the country and displays all test parameters in CR. From there were chosen three types of tests that were performed in a satisfactory sampling of IP´s. With this procedure it was possible to establish which of those IP's should be out of use, which reveals the important purpose of the study, demonstrating the need for Quality Control Testing and Acceptance in Computerized Radiography as soon as possible are included in the legislation regulator in the country

Mapeamento geoestatístico da permeabilidade superficial no entorno do Ribeirão Claro: e simulação da possibilidade de sua contaminação

The evaluation of soil permeability throughout the weathering profile is one of the most important features to be considered in environmental studies. This study, developed from field testing and analysis of data obtained by geostatistical methods, aims at mapping the permeability around the Ribeirão Claro river. The intent is to simulate an accident with toxic liquids where soil permeability is of fundamental importance. Another purpose of the research was to determine the minimum time that, in the event of an accident, a possible contaminant to reach the water table level and be routed to the nearest drain, in this case, the Ribeirao V Claro river constitutes fundamental information. The studied area of approximately 4 km² is located within the UNESP-Rio Claro campus, consisting of colluvial soil from Fm. Rio Claro superimposed on residual soil of Fm. Corumbataí. The method used to determine the permeability is the concentric cylinders performed on a sampling grid with 64 points containing spacing of 5 meters EW and 10 meters NS. In the places of permeability tests were collected samples for laboratory determination of the percentage of fines. From particle size analysis was performed and analysis statistical and geostatistical on this data. The histogram was based on the statistical studies, and the semivariograms were based on geostatistical estimation methods. Based on the comparison between the maps and the data obtained, it was determined that the percentage of fines in colluvial surface soil has little influence on permeability, which the proximity to the Ribeirao Claro river, the eastern portion, a factor that influences the distribution of permeability values

Análise do desempenho físico-mecânico de painéis compensados de Pinus sp. produzidos com adesivos aquosos a base de poliacetato de vinila e de homopolímero vinílico

This study aimed to evaluate the physico-mechanical performance of three PVA adhesive formulations according to the Brazilian standards for plywood testing and to evaluate the results with those presented in the technical literature and specified in normative documents. The study presents the production process of the panels, the obtaining of samples and, finally, the implementation of physico-mechanical characterization tests based on plywood Brazilian standards. For the panels production it was used a gramature of 120 g / m² and applied a pressure of 15 bars and two temperature combinations and pressing time for each adhesive. The commercial adhesives used were PVA 1810, PVA 1060 and Vinyltec 239. The physical tests conducted were thickness swelling, density, moisture content and water absorption. The mechanical tests were static flexion, for the determination of elasticity modulus (MOE) and rupture modulus (MOR), and shear in the glue line. Among the three formulations studied none showed good performance in the presence of water. However, other trials in the adhesive showed better results and closer to the commercially equivalent used, in the case the urea-formaldehyde, was the PVA 1810, that can be applied in non-structural uses and in environments without the presence of moisture

Estudo de cerâmicas avançadas para fins de blindagem balística

The research involving new materials has always been considered as a differential in the development of a technology company. This occurred naturally since ancient times, often motivated by reasons of a certain age, where the most common material used was also the name of your time and may be cited as an example the Bronze Age, and later was the Iron. Currently, the use of firearms are they used in resolving conflicts between countries, or a more equivocal, as an instrument of social banditry make innovations in the area of shielding welcome, whether for personal use, in the form of vests or vehicle such as cars, tanks and even aircraft. In this context, is a Silicon Carbide Ceramic, with low density and high hardness. Thus, the aim of this study is the evaluation and comparison of these materials, seeking to improve their properties by means of additives such as boron and silicon metal and amorphous YAG. For this work, the specimens were pre-shaped by means of uniaxial later to be referred for isostatic pressing and sintering. The maximum percentage for each additive was 5%, except for the YAG whose percentage was 8.2% (mass percentage). All compositions were subjected to the same tests (x-ray diffraction, apparent density, optical microscopy, Vickers hardness, scanning electron Microscopita), so that one could draw a comparison between the materials under study, samples that showed better mechanical properties and micro structural, related here by hardness testing and microscopy (optical and SEM) were the silicon carbide doped with YAG and alumina samples, demonstrating the potential of these materials for ballistic protection. Other compositions have high porosity, which is highly undesirable, since in order to harmful influences on the mechanical properties discussed below

Web Services Aplicados à Visualização

With the rapid growth of the use of Web applications in various fields of knowledge, the term Web service enter into evidence in the current scenario, which refers to services from different origins and purpose, offered through local networks and also available in some cases, on the Internet. The architecture of this type of application offers data processing on server side thereby, running applications and complex and slow processes is very interesting, which is the case with most algorithms involving visualization. The VTK is a library intended for visualization, and features a large variety of methods and algorithms for this purpose, but with a graphics engine that requires processing capacity. The union of these two resources can bring interesting results and contribute for performance improvements in the VTK library. This study is discussed in this project, through testing and communication overhead analysis

avaliação de proficiência

In this study we discuss the role of pronunciation in language testing and investigate two features of pronunciation of eight candidates of the Test of Oral Proficiency in English (TEPOLI) along four bands of the test scale. Deviations in vowel segments and in syllable structure are analyzed. The results point to the need for a global assessment of the candidates’ phonological systems