152 resultados para Structural Features
Resumo:
Hybrid planar waveguides were prepared from Ti4+-acetylacetone (acac)-Ureasil sols deposited on glass substrates. Structural features have been investigated by spectroscopic measurements (Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS) and Raman scattering) and Small Angle X-ray Scattering (SAXS). Addition of Ti 4+-acac to the ureasil (Ti:Si molar ratio 1:1) leads to the formation of bonds between the Ti complex and the siloxane groups, whereas further addition of Ti4+ (Ti:Si molar ratio 5:1) leads to the additional formation of titanium-rich nanoclusters. The optical parameters of the waveguides such as refractive index, thickness, propagating modes and attenuation coefficient were measured at 632.8, 543.5 and 1550 nm by the prism coupling technique. The refractive index can be tuned by the Ti4+ relative content. The few microns thick planar waveguides support well confined propagating modes with low attenuation loss for all compositions. ©2006 Sociedade Brasileira de Química.
Resumo:
Ethanolic extracts of the leaves of Casearia sylvestris yielded a novel clerodane diterpene, 15-hydroxy-3-cleroden-2-one, together with the known diterpenes (-)-hardwickiic acid, reported for the first time from this species, and casearins B and G, previously isolated from C. sylvestris. The structures of all four compounds were determined by spectrometric analysis. The new clerodane diterpene and (-)-hardwickiic acid contain structural features that are completely different from the highly oxygenated casearins and casearvestrins isolated from C. sylvestris.
Resumo:
X-ray computed tomography (CT) refers to the cross-sectional imaging of an object measuring the transmitted radiation at different directions. In this work, we describe a non-conventional application of computerized tomography: visualization and improvements in the understanding of some internal structural features of solid dosage forms. A micro-CT X-ray scanner, with a minimum resolution of 30 μm was used to characterize some pharmaceutical tablets, granules, controlled-release osmotic tablet and liquid-filled soft-gelatin capsules. The analysis presented in this work are essentially qualitative, but quantitative parameters, such as porosity, density distribution, tablets dimensions, etc. could also be obtained using the related CT techniques. © 2010 American Institute of Physics.
Resumo:
This paper presents a review on the geotectonic framework of the Southeastern Brazil and neighborhoods, and its importance in the regional geologic evolution, which was exposed as a main conference at the XI Symposium of Southeast Geology (São Pedro, SP, 2009). Although the geologic history dates back to the Archean, and Paleo to Mesoproterozoic processes related to the evolution of the Columbia and Rodinia supercontinents occurred, it was in the Neoproterozoic that the most important structural features developed due to collisional tectonics. The collisions began in the Brasiliano I (900-700 Ma), but mainly developed during the Brasiliano II (670-530 Ma) and ended in the Brasiliano III (580-490 Ma), resulting the orogenic systems of Mantiqueira and Tocantins. The final consolidation resulted in Gondwana, around 460 My in the part which correspond to the South America Platform. The structural features represent an important heritage that controlled much the Phanerozic geologic and tectonic processes: the formation of the Paraná Basin in the Ordovician-Jurassic, the South Atlantian reactivation (active magmatism and Paraná LIP, rifting, morphogenesis and the Atlantic opening), and the Neogene-Quaternary intraplate discrete neotectonism.
Resumo:
The oxygenation of human Hb (HbA) demands a three state model: two deoxy states To and Tx, free and complexed with anions respectively, and an oxy R state. The regulation between these states is modulated by the presence of anions, such as chloride, that binds to T state. The b inding if chloride, however, remains controversial. The aim of this work is the study of arginines 92a (a1ß2 interface) and 141a (C-terminal) as chloride binding sites. To investigate that, we have studied 92 and 141 site directed mutant species: natural mutants Hb J-Cape-Town (R92Q), desArg (R141Δ), Chesapeake (R92L), and the constructed Chesapeake desArg (R92L,141Δ). We expressed Hbs in Escherichia coli and purified. Through oxygen binding curves we measured affinity and cooperativity, in function of water effect and Bohr effect in presence and absence of chloride. Structural features were obtained through 1H NMR spectroscopy Oxygen binding properties and Bohr effect measured indicated a higher affinity and lower cooperativity in absence and presence of chloride for all mutants. Structural changes represent functional aspects of mutant Hbs, such as a significant rise in affinity or a change in cooperativity. Water activity studies conducted as a function of chloride concentration showed that the only Hb desArg follows the thre state model. The other mutant Hbs do not exhibit the Tx state, a fact confirmed by the number of water molecules bound to each Hb during the deoxy-oxy transition. This behavior suggests that the Arginine 92 site could be responsible for chloride binding to Hb, since oxygenation of 92 mutant Hbs cannot be adjusted by the three state model. However, Bohr effect showed that all mutant Hbs released~1 proton in chloride presence, different from HbA that releases ~2, suggesting a role for 141 arginine in the tertiary and quaternary Bohr effect.
Resumo:
An exocellular β-(1→6)-d-glucan (lasiodiplodan) produced by a strain of Lasiodiplodia theobromae (MMLR) grown on sucrose was derivatized by sulfonation to promote anticoagulant activity. The structural features of the sulfonated β-(1→6)-d-glucan were investigated by UV-vis, FT-IR and 13C NMR spectroscopy, and the anticoagulant activity was investigated by the classical coagulation assays APTT, PT and TT using heparin as standard. The content of sulfur and degree of substitution of the sulfonated glucan was 11.73% and 0.95, respectively. UV spectroscopy showed a band at 261 nm due to the unsaturated bond formed in the sulfonation reaction. Results of FT-IR and 13C NMR indicated that sulfonyl groups were inserted on the polysaccharide. The sulfonated β-(1→6)-d-glucan presented anticoagulant activity as demonstrated by the increase in dose dependence of APTT and TT, and these actions most likely occurred because of the inserted sulfonate groups on the polysaccharide. The lasiodiplodan did not inhibit the coagulation tests. © 2012 Elsevier Ltd.
Resumo:
Abstract: In the past few years, tribocorrosion has become a focus of research because of its relevance in terms of the future in-service degradation mechanisms of materials. In the particular case of decorative coatings, tribocorrosion is certainly one of the most important issues, and sweat corrosion and human contact wear are two other factors that may act as material selection tools. Thus, the current study aimed to investigate the tribocorrosion behavior of a new class of thin films, the Ti-C-O-N system, which is being developed to be used as a surface decorative material due to its relatively dark appearance. The films were prepared by reactive magnetron sputtering. The influence of the structural features on the tribocorrosion behavior is discussed. Crown Copyright © 2013.
Resumo:
Nitensidine A is a guanidine alkaloid isolated from Pterogyne nitens, a common plant in South America. To gain insight into the biological activity of P. nitens-produced compounds, we examined herein their biological effects on osteoclasts, multinucleated giant cells that regulate bone metabolism by resorbing bone. Among four guanidine alkaloids (i.e., galegine, nitensidine A, pterogynidine, and pterogynine), nitensidine A and pterogynine exhibited anti-osteoclastic effects at 10 μM by reducing the number of osteoclasts on the culture plate whereas galegine and pterogynidine did not. The anti-osteoclastic activities of nitensidine A and pterogynine were exerted in a concentration-dependent manner, whereas nitensidine A exhibited an approximate threefold stronger effect than pterogynine (IC50 values: nitensidine A, 0.93 ± 0.024 μM; pterogynine, 2.7 ± 0.40 μM). In the present study, the anti-osteoclastic effects of two synthetic nitensidine A derivatives (nitensidine AT and AU) were also examined to gain insight into the structural features of nitensidine A that exert an anti-osteoclastic effect. The anti-osteoclastic effect of nitensidine A was greatly reduced by substituting the imino nitrogen atom in nitensidine A with sulfur or oxygen. According to the differences in chemical structures and anti-osteoclastic effects of the four guanidine alkaloids and the two synthetic nitensidine A derivatives, it is suggested that the number, binding site, and polymerization degree of isoprenyl moiety in the guanidine alkaloids and the imino nitrogen atom cooperatively contribute to their anti-osteoclastic effects. © 2013 Springer Science+Business Media Dordrecht.
Resumo:
Tungsten oxide/titania (WO3/TiO2) nanopowders were synthesized by the polymeric precursor method which varied the WO3 content between 0 and 10 mol%. The powders were thermally treated in a conventional furnace and their structural, microstructural and electric properties were evaluated by X-ray diffraction (XRD), Raman spectrometry, N 2 physisorption, NH3 chemisorption, temperature-programmed reduction (TPR), X-ray absorption near-edge spectroscopy (XANES) in situ XANES and extended X-ray absorption fine structure spectroscopy (EXAFS) and transmission electron microscopy (TEM). XRD and Raman spectrometry confirmed the homogeneous distribution of an amorphous WO3 phase in the TiO 2 matrix which stabilized the anatase phase through the generation of [TiO5·V0] or [TiO5·V 0] complex sites. Conventional TPR-H2 (temperature programmed reduction) along with XANES TPR-H2 and XANES TPR-EtOH showed that WO3/TiO2 sample reduction occurs through the formation of these complex clusters. Moreover, the addition of WO3 promoted an increase in the surface acidity of doped samples as revealed by NH3 chemisorption. The WO3/TiO2 bulk-ceramic samples were further used to estimate their potential application in a humidity sensor in the range of 15-85% relative humidity. Probable reasons that lead to the different humidity sensor responses of samples were given based on the structural and surface characterizations. Correlation between the sensing performance of the sensor and its structural features are also discussed. Although all samples responded as a humidity sensor, the W2T sample (2 mol% added WO3) excelled for sensitivity due to the increase in acid sites, optimum mean pore size and pore size distribution. © 2013 Elsevier B.V.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Biologia Animal - IBILCE
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Educação - FFC