Fluorescência da clorofila-a e variação da simetria como ferramentas de investigação de plantas sob estresse

Environmental disturbances in various systems and individuals can result in a tendency for fluctuating asymmetry, which consists of a non-directional deviation from symmetry of a bilateral structure in a normally distributed population. Individuals unable to exhibit plastic responses to developmental disorders that occur at random, either genetic or environmental, may exhibit slight deviations from symmetry in organs with bilateral structure such as leaves. Thus analyzing plants by the morphological pattern of symmetry of the leaves has become an effective tool to describe the developmental of plants under stress conditions. This study aimed to analyze if the pattern of symmetry can be used as a tool to investigate the stress level to which a plant is subjected, using ultraviolet-C radiation (UV-C) as source of stress. We determined the leaf symmetry deviations (sd), the average length (AL) and the maximum width of the lamina (MWL) and the fluorescence parameters of chlorophyll-a in leaves of young plants of G. max subjected to 0, 30, 60, 120 or 240 minutes per week of UV-C during four weeks, submitting the values to ANOVA and Tukey test (p <0.05). The results showed significant reductions in AL and MWL, significant increase in sd in leaves irradiated and a drop in potential quantum yield of photosystem II (PSII) and in the photosynthesis performance index (IP). The analysis of leaf symmetry showed high correlation with the stress level to which plants were submitted, being an important analysis to ascertain the fitness of the plant because it is a noninvasive method and easy to perform.

Artificial satellites: Resonance effects produced by terrestrial tide

Effects due to resonances in the orbital motion of artificial satellites disturbed by the terrestrial tide are analyzed. The nodal co-rotation resonance, apsidal co-rotation resonance and the Lidov-Kozai's mechanism are studied. The effects of the resonances are analyzed through the variations of the metric orbital elements. Libration and circulation motions for high orbits with high eccentricities are verified for the Lidov-Kozai's mechanism.

First report of Lasiodiplodia theobromae causing stem rot disease of begonia (Begonia x elatior hort.) in Brazil

Lasiodiplodia theobromae was found causing stem rot on commercial production of Begonia x elatior in São Paulo, Brazil. Illustrations, morphological and molecular description are provided. Based on the morphology, this fungus was recognized as L. theobromae. However, L. theobromae has high similarity with other Lasiodiplodia species, some of which are not possible to be separated by morphological characters. Molecular identification of the fungus isolated from the infected tissues was conducted. The strain from begonia clustered with other isolates of L. theobromae. This is the first report of the occurrence of L. theobromae on B. elatior. © 2012 Australasian Plant Pathology Society Inc.

Rough turning of titanium alloy (6Al-4V)

Metal machining is the complex process due the used cutting parameters. In metal cutting process, materials of workpiece differ widely in their ability to deform plastically, to fracture and to sustain tensile stresses. Moreover, the material involved in the process has a great influence in these operations. The Ti-6Al-4V alloy is very used in the aeronautical industry, mainly in the manufacture of engines, has very important properties such the mechanical and corrosion resistance in high te mperatures. The turning of the Ti-Al-4V alloy is very difficult due the rapid tool wear. Such behavior result of the its low thermal conductivity in addition the high reactivity with the cutting tool. The formed chip is segmented and regions of the large deformation named shear bands plows formed. The machinability of the cutting process can be evaluated by several measures including power consume, machined surface quality, tool wear, tool life, microstructure and morphology of the obtained chip. This paper studies the effect of cutting parameters, speed and feed rates, in the tool wear and chip properties using uncoating cemented carbide tool. Microe-structural characterization of the chip and tool wear was performed using scanning electron microscopy (SEM) and Light Optical Mcroscopy (LOM).

Sexual differences in parental feeding effort during the nestling period of the White-headed Marsh-Tyrant (Arundinicola leucocephala)

Parental effort may influence the fitness and survivorship of adult birds and their offspring from one breeding season to the next. Although much is known about parental feeding effort in tyrant flycatchers, many species remain understudied. In this study, I examined parental feeding effort of the White-headed Marsh-Tyrant (Awndinicola leucocephala) at a pond in southeastern Brazil. I conducted 10.3 hrs of observations from two locations: a high place with all view of the whole pond, that allowed me to observe flight distances of parents hunting for prey; and from near the nest to observe frequency of visits to the nest. The female marsh-tyrant flew farther while hunting prey and made more visits to the nest than did the male. The adults (mainly the female) provided a variety of terrestrial and aquatic arthropods to the nestlings. Additionally, parents removed fecal sacs from the nest and nestlings eliminated arthropod remains from the nest, the first records of nest sanitation activities by this species. Nonexclusive hypotheses that may explain the lower level of parental care provided by the male include: higher predation risk due its more conspicuous plumage, commitment of male to territory defense, and its selfish behavior influenced by indirect genotype fitness inherited by the offspring. © The Neotropical Ornithological Society.

SERS mapping in langmuir-blodgett films and single-molecule detection

Plasmon-enhanced spectroscopic techniques have expanded single-molecule detection (SMD) and are revolutionizing areas such as bio-imaging and single-cell manipulation. Surface-enhanced (resonance) Raman scattering (SERS or SERRS) combines high sensitivity with molecularfingerprint information at the single-molecule level. Spectra originating from single-molecule SERS experiments are rare events, which occur only if a single molecule is located in a hot-spot zone. In this spot, the molecule is selectively exposed to a significant enhancement associated with a high, local electromagnetic field in the plasmonic substrate. Here, we report an SMD study with an electrostatic approach in which a Langmuir film of a phospholipid with anionic polar head groups (PO 4 -) was doped with cationic methylene blue (MB), creating a homogeneous, two-dimensional distribution of dyes in the monolayer. The number of dyes in the probed area of the Langmuir-Blodgett (LB) film coating the Ag nanostructures established a regime in which single-molecule events were observed, with the identification based on direct matching of the observed spectrum at each point of the mapping with a reference spectrum for the MB molecule. In addition, advanced fitting techniques were tested with the data obtained from micro-Raman mapping, thus achieving real-time processing to extract the MB single-molecule spectra. © 2013 Society for Applied Spectroscopy.

Genome-wide association study for birth weight in Nellore cattle points to previously described orthologous genes affecting human and bovine height

Background: Birth weight (BW) is an economically important trait in beef cattle, and is associated with growth- and stature-related traits and calving difficulty. One region of the cattle genome, located on Bos primigenius taurus chromosome 14 (BTA14), has been previously shown to be associated with stature by multiple independent studies, and contains orthologous genes affecting human height. A genome-wide association study (GWAS) for BW in Brazilian Nellore cattle (Bos primigenius indicus) was performed using estimated breeding values (EBVs) of 654 progeny-tested bulls genotyped for over 777,000 single nucleotide polymorphisms (SNPs).Results: The most significant SNP (rs133012258, PGC = 1.34 × 10-9), located at BTA14:25376827, explained 4.62% of the variance in BW EBVs. The surrounding 1 Mb region presented high identity with human, pig and mouse autosomes 8, 4 and 4, respectively, and contains the orthologous height genes PLAG1, CHCHD7, MOS, RPS20, LYN, RDHE2 (SDR16C5) and PENK. The region also overlapped 28 quantitative trait loci (QTLs) previously reported in literature by linkage mapping studies in cattle, including QTLs for birth weight, mature height, carcass weight, stature, pre-weaning average daily gain, calving ease, and gestation length.Conclusions: This study presents the first GWAS applying a high-density SNP panel to identify putative chromosome regions affecting birth weight in Nellore cattle. These results suggest that the QTLs on BTA14 associated with body size in taurine cattle (Bos primigenius taurus) also affect birth weight and size in zebu cattle (Bos primigenius indicus). © 2013 Utsunomiya et al.; licensee BioMed Central Ltd.

Genetic parameter estimates and principal component analysis of breeding values of reproduction and growth traits in female Canchim cattle

Phenotypic data from female Canchim beef cattle were used to obtain estimates of genetic parameters for reproduction and growth traits using a linear animal mixed model. In addition, relationships among animal estimated breeding values (EBVs) for these traits were explored using principal component analysis. The traits studied in female Canchim cattle were age at first calving (AFC), age at second calving (ASC), calving interval (CI), and bodyweight at 420 days of age (BW420). The heritability estimates for AFC, ASC, CI and BW420 were 0.03±0.01, 0.07±0.01, 0.06±0.02, and 0.24±0.02, respectively. The genetic correlations for AFC with ASC, AFC with CI, AFC with BW420, ASC with CI, ASC with BW420, and CI with BW420 were 0.87±0.07, 0.23±0.02, -0.15±0.01, 0.67±0.13, -0.07±0.13, and 0.02±0.14, respectively. Standardised EBVs for AFC, ASC and CI exhibited a high association with the first principal component, whereas the standardised EBV for BW420 was closely associated with the second principal component. The heritability estimates for AFC, ASC and CI suggest that these traits would respond slowly to selection. However, selection response could be enhanced by constructing selection indices based on the principal components. © CSIRO 2013.

Soil organic matter and physical attributes affected by crop rotation under no-till

Growing cover crops in systems under no tillage affects different pools of soil organic matter, and eventually soil physical attributes are modified. The objective of this study was to evaluate changes in soil organic matter and their relationship with soil physical attributes as affected by plant species grown in rotation with soybean [Glycine max (L.) Merr.] under no-till for 3 yr. Crop rotations included grain sorghum [Sorghum bicolor (L.) Moench], ruzigrass [Urochloa ruziziensis (R. Germ, and CM. Evard) Crins] and sorghum mixed with ruzigrass, all grown in fall/winter, followed by pearl millet [Pennisetum americanum (L.) Leeke], sunn hemp (Crotalaria juncea L.) and sorghum-sudangrass [S. bicolor × S. sudanense (Piper) Stapf] grown during the spring, plus a fallow check plot. Soybean was grown as the summer crop. Millet and sorghum-sudangrass cropped in spring showed higher root and shoot production as spring cropping. In fall/winter, sorghum mixed with ruzigrass yielded higher phytomass compared with sole cropping. Soil physical attributes and organic matter fractioning were positively affected by cropping millet and sorghum-sudangrass whereas intermediate effects were observed after sunn hemp. Maintaining fallow in spring had negative effects on soil organic matter and physical properties. Ruzigrass and sorghum mixed with ruzigrass cropped in fall/winter resulted in better soil quality. Spring cover crops were more efficient in changing soil bulk density, porosity, and aggregates down to 0 to 10 cm; on the other hand, fall/winter cropping showed significant effects on bulk density in the uppermost soil layer. Total C levels in soil were increased after a 3-yr rotation period due to poor initial physical conditions. Fractions of particulate organic C, microbial C, and C in macroaggregates were the most affected by crop rotations, and showed high relation with improved soil physical attributes (porosity, density, and aggregates larger than 2 mm). © Soil Science Society of America, All rights reserved.

Reconhecimento de palavras, nomeação de figuras e de palavras impressas em surdos implantados pré-linguais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Extração semi-automática de rodovias no espaço-objeto: uso integrado de um estéreo par de imagens aéreas e um MDT

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Detecção de Paracoccidioides sp. em amostras ambientais aerossóis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Características biométricas das sementes e descrição da resposta germinativa pelo modelo do tempo térmico em diferentes populações de Peltophorum dubium (Spreng.) Taub

Pós-graduação em Ciências Biológicas (Biologia Vegetal) - IBRC

Clonagem de oxidoesqualeno ciclases de Maytenus ilicifolia Mart. ex Reissek (CELASTRACEAE)

Pós-graduação em Biotecnologia - IQ

Morfometria da bacia hidrográfica do rio Bobo no Estado de Nariño, Colômbia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)