103 resultados para Solares
Resumo:
The chemical control of the causal agent of citrus black spot (CBS) has been highlighted for the excessive required number of sprayings, considerably increasing citrus production costs. Improvements in the spray efficiency and reductions in the quantity of phytosanitary products have already been searched, but the results of that practice are not consistent yet for its use at commercial scale. Thus, the aim of the present study was to evaluate the interference of reduced spray volumes in black spot control in citrus fruits. The experiment was carried out in commercial citrus orchard with 16-year-old plants of 'Valencia' variety, during 2007 agricultural season. Treatments consisted of three spray volumes: 3.5; 4.5 and 8.5 liters.plant-1, applied with Arbus 2000/Export airblast sprayer with special manifold of hydraulic nozzles, using fungicides and periods recommended for the disease control, totaling four sprayings plus a control treatment (without spray). The disease incidence and severity were evaluated by visual diagrammatic scale of notes in two different periods (preharvest and harvest), at three plant heights (low, middle and top) and three horizontal sections (entrance, frontal and exit) in two sides of the plant. The fallen fruits were counted every fifteen days, for previously selected plants, from the beginning of maturation to harvest, and the production was quantified (kg.plant-1). The disease incidence and severity were significantly lower when sprayings were done with 8.5 liters.plant-1 in the first evaluation period (pre-harvest), but in the harvest period there were not differences between the same parameters when 4.5 or 8.5 liters.plant-1 were sprayed. None of those treatments reduced the disease on the top section of plants, compared to control. The plant sections with fruits more exposed to sun rays, top and right side of the plant, demonstrated higher disease incidence and severity. The volume reduction from 8.5 to 4.5 liters.plant-1 can be adopted for citrus orchards without damaging the CBS control level.
Resumo:
The sun has an extremely important role in the existence of human beings, and Brazil has a privileged geographical position to explore sunlight. The union of these two factors favors the use of solar cells for converting solar energy into electricity by photovoltaic technology: it is a great alternative energy source, especially for being a clean one, causing less damage to the environment. This paper addresses the photovoltaic technology with a focus on hospitals, through case studies found in international literature, because hospitals, even running all important services to society, have a potential for pollution capable of causing damage to human health and the environment that is around them. It is estimated that the Brazilian oil reserves are sufficient for twenty-two years. This makes the search for alternative sources for power generation a necessity.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Engenharia Elétrica - FEB
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
O protetor solar é um produto extremamente importante para proteger a pele da radiação ultravioleta proveniente do sol e capaz de reduzir a incidência de câncer de pele. Os filtros solares são divididos em orgânicos e inorgânicos e, dentre os inorgânicos, se encontra o TiO2 que atua refletindo, espalhando e absorvendo as radiações UV, além de ser fotoestável e de baixo potencial de irritabilidade dérmica. Neste trabalho foram desenvolvidas formulações cosméticas em forma de gel contendo nanopartículas de dióxido de titânio capazes de agir como fotoprotetores físicos e que mantem a transparência ao serem aplicados sobre uma superfície, como a pele. Foram desenvolvidos xerogéis a base de nanopartículas de TiO2 com tamanho e superfície controlados. A partir dessas nanopartículas foi possível preparar formulações cosméticas contendo nanopartículas redispersas de xerogéis a base de TiO2. Esses sistemas foram avaliados por testes de citotoxicidade e foi obtido um resultado favorável para a continuidade da pesquisa, sugerindo o uso deste material em humanos sem causar danos. Foram feitas as caracterizações físico químicas e estruturais. A análise de FPS indicou amplo espectro da formulação, o potencial zeta mostrou que é possível evitar aglomerações das nanopartículas em pHs utilizados para formulações tópicas, a reologia demonstrou que as formulações apresentam comportamento de recuperação da consistência e organização do material inicial após seu desarranjo durante o cisalhamento. As caracterizações serviram para obter um conhecimento da estrutura química e física das amostras que contém as nanopartículas de dióxido de titânio, para que seja possível fazer uma análise crítica e melhor qualificar o protetor solar desenvolvido.
Resumo:
Due to the high value of the bill that the Brazilian has been paying, one of the most expensive in the world, is becoming increasingly attractive the option for renewable energy in form of distributed micro and minigeneration. In other words, the renewable energy sources are becoming attractive not only because of environmental concerns, but also due to economic issues. This has become even more relevant and concrete after approval of rules by National Agency of Electric Energy (ANEEL) on 4/17/2012 (Normative Resolution n ° 482/2012 of 04/17/2012) aimed at reducing barriers to installation of small distributed generation, including microgeneration, with up to 100 kW of power, and minigeneration, 100 kW to 1 MW. The Normative Resolution n ° 482/2012 creates the Energy Clearing System, which allows consumers to install small generators in its consumer unit and exchange energy with the local distributor. The rule applies to generators that use renewable sources of energy (hydro, solar, biomass, wind and cogeneration qualified). In this context, this paper presents a technical and economic analysis of installing a residential microgenerating plant composed of photovoltaic cells, solar panels and small wind turbines
Resumo:
Frente ao desafio de prover água de melhor qualidade para o uso humano a um custo acessível e de simples execução, muitos métodos tem sido desenvolvidos e estudados. Uma metodologia que tem se destacado atualmente, é o método SODIS, sigla em inglês que significa, desinfecção da água por meio da luz solar. Essa metodologia tem como princípio a inativação de uma variada gama de microrganismos patogênicos a partir da ação dos raios solares. Essa metodologia consiste em submeter garrafas de água a um banho de luz solar por algumas horas. Para a realização do método SODIS pode-se utilizar garrafas PET (politereftalato de etileno), sendo que sua execução é simples e rápida além de possuir mínimos riscos envolvidos. A fim de comprovar a eficácia desse método, muitos estudos tem investigado os mecanismos e fatores importantes envolvidos no processo de inativação. Da compreensão desses mecanismos e fatores críticos, preconizou-se ações que visam garantir e maximizar a eficiência do método em variadas situações e condições climáticas sem que o método se torne complexo ou oneroso. O método SODIS se mostrou eficaz na inativação de várias espécies de fungos, vírus, bactérias e até protozoários. Estudos de campo revelaram a sua eficácia prática, ocasionando uma diminuição expressiva nas ocorrências referentes a quadros de diarréia e diarréia severa nas populações estudadas
Resumo:
The term refrigeration solar refers to any air conditioning system that uses solar energy as a primary energy source. The use of solar radiation for cooling purposes is divided according to their technological possibilities which are distinguished from one another as the way that energy is involved in the cycle, work or heat. The first case is related to vapor compression cycles, in which the work input is provided by the photovoltaic conversion of solar energy into electrical energy. In the second case, an absorption refrigeration cycle is used and the thermal energy collected from the solar radiation is provided at the generator of this cycle.. In this work a system with an absorption cycle using the pair BrLi-water, using solar energy as input is modeled. It is considered a simple refrigeration cycle whose the equations of mass and energy conservation in each component are developed in order to obtain an algebraic equation set and a simulation routine using the EES software. Although the simulation operates under certain specified thermal load it is possible to estimate the necessary areas of heat exchangers and solar collectors
Resumo:
This paper discusses the importance of energy efficiency and the use of alternative energy sources, facing to the increasing energy demand and the concomitant economic, social and environmental restrictions imposed by society. In this work, alternative sources are illustrated by photovoltaic, micro turbines and fuel cells microgeneration systems. Energy efficiency is presented by direct current microgrids because its uses excludes the conversions of direct current (DC) to alternating current (AC) losses made with the intention of injecting energy into the electric grid and then the inverse conversion, AC to DC, in order to feed residential loads. The object of this paper is to analyze a case study and evaluates the costs and technical feasibility of a Project that combines a DC microgrid and a microgeneration system
Resumo:
Due to the high value of the bill that the Brazilian has been paying, one of the most expensive in the world, is becoming increasingly attractive the option for renewable energy in form of distributed micro and minigeneration. In other words, the renewable energy sources are becoming attractive not only because of environmental concerns, but also due to economic issues. This has become even more relevant and concrete after approval of rules by National Agency of Electric Energy (ANEEL) on 4/17/2012 (Normative Resolution n ° 482/2012 of 04/17/2012) aimed at reducing barriers to installation of small distributed generation, including microgeneration, with up to 100 kW of power, and minigeneration, 100 kW to 1 MW. The Normative Resolution n ° 482/2012 creates the Energy Clearing System, which allows consumers to install small generators in its consumer unit and exchange energy with the local distributor. The rule applies to generators that use renewable sources of energy (hydro, solar, biomass, wind and cogeneration qualified). In this context, this paper presents a technical and economic analysis of installing a residential microgenerating plant composed of photovoltaic cells, solar panels and small wind turbines
Resumo:
Nowadays, the biggest part of the world's energy supply comes from fossil fuels and nuclear. However, the current need of the society for the preservation of the environment and wise use of natural resources, has favored the search for alternative energy sources and improvement of energy efficiency. In this new scenario, companies are beginning to mobilize in order to adapt its facilities to renewable energy. Solar, with its immense potential, not really exploited yet, can be very useful for companies that want to beat their sustainability goals. Given these facts, the aim is to evaluate the economic viability of introducing a solar water heater which uses a colorless PET bottle as one of its components in a plant. The hot water generated will heat the air of a paint booth and a warm house, reducing energy consumption, since they are heated by electric heaters