Complex modal analysis of a vertical rotor through finite element method

Natural frequencies were analyzed (axial, torsional and flexural) and frequency response of a vertical rotor with a hard disk at the edge through the classical and complex modal analysis. The mathematical modeling was based on the theory of Euler-Bernoulli beam. The equation that rules the movement was obtained through the Lagrangian formulation. The model considered the effects of bending, torsion and axial deformation of the shaft, besides the gravitational and gyroscopic effects. The finite element method was used to discretize the structure into hollow cylindrical elements with 12 degrees of freedom. Mass, stiffness and gyroscopic matrices were explained consistently. This type of tool, based on the use of complex coordinates to describe the dynamic behavior of rotating shaft, allows the decomposition of the system in two submodes, backward and forward. Thus, it is possible to clearly visualize that the orbit and direction of the precessional motion around the line of the rotating shaft is not deformed. A finite element program was developed using Matlab ®, and numerical simulations were performed to validate this model.

Cálculo em elementos finitos das frequências naturais dos modos de flexão de uma linha de eixo de unidade geradora hidráulica em escala

Pós-graduação em Engenharia Mecânica - FEG

Undifferentiated pulmonary adenocarcinoma of clear cells associated to hypertrophic osteopathy in a dog

Background: Most of the primary pulmonary tumors in dogs are malignant and from epithelial origin, being bronchioalveolar tumors more prevalent. Adenocarcinoma of clear cells, however, is a very rare pulmonary tumor and its origin is still unknown. It is related to several clinical abnormalities, including hypertrophic osteopathy, an unusual paraneoplastic syndrome characterized by a periosteal reaction along the shaft of long bones. Because of the unusual presentation of the pulmonary adenocarcinoma, the aim of this study was to describe the radiographic, histopathological, and immunohistochemical fi ndings of a dog affl icted with hypertrophic osteopathy secondary to an undifferentiated pulmonary adenocarcinoma of clear cells. Case: A 12-year-old, 45 kg, not castrated male Great Dane dog was presented with painful swelling of all four limbs and moderate respiratory distress. Radiographic examination and computed tomography of the limbs showed palisade-like periosteal bone proliferation involving radius, ulna, femur, patella, tibia, fi bula, tarsus, metacarpal, metatarsal and digits, suggesting hypertrophic osteopathy. Radiographic examination and computed tomography of the lungs also showed a round mass well delimited localized in the right diaphragmatic lobe. A lobectomy of the right diaphragmatic lobe and partial lobectomy of accessory lobe were performed. A poorly differentiated clear squamous cell carcinoma was diagnosed by histological examination. An immune-panel of CK5/CK6, CK7, p63 and TTF-1 was used for immunophenotyping. Immunostaining was weakly positive for CK5/CK6 and negative to all others. Therefore, the diagnosis was poorly differentiated clear cell adenocarcinoma. The dog showed improvement in clinical signs seven days after surgery. One month postoperatively, radiographic examination of the limbs showed less intense periosteal reaction and initiation of bone remodeling. Discussion: Primary pulmonary tumors are considered very infrequent in small animals, but its true incidence rate is dif- fi cult to establish in animal populations. The histological origin of the tumor in the present case, as verifi ed in the literature, is not well established by histological analysis. In these situations, the immunohistochemistry panel may be useful. The modifi cation of the diagnosis between histological analysis and by immunohistochemistry, among other factors, might be due to transdifferentiation from one phenotype to another at various stages in the neoplastic process. The clear cell appearance observed in this case may be verifi ed in all types of carcinoma due to intracellular accumulation of glycogen, most of which is dissolved during the preparation of paraffi n sections. This uncommon neoplasm apparently did not infl uence the radiographic or tomographic fi ndings of the hypertrophic osteopathy in the present case. The frequency of metastases depends on the histological type of the tumor, being common in the pulmonary adenocarcinoma and usually to tracheobronchial lymph nodes and pulmonary parenchyma. Although in this case the imaging studies did not show metastases to other pulmonary lobes, the histological exams showed metastatic lesions that may be associated to the dog’s death after the surgery.

Células-combustível a etanol direto embarcadas em aeronaves: estudo de utilização e recuperação de calor residual

Pós-graduação em Engenharia Mecânica - FEG

Desenvolvimento de uma caixa de redução para veículo Baja SAE

A gear Box in a Baja SAE vehicle is required due to the objectives of the SAE competitions, which the vehicles are challenged to pass through different obstacles. A powertrain system has as the main objective the extension of the torque for the traction shaft of the vehicle, when compared to that one available in the engine. The Objective of this thesis is the description of a gear box project for a Baja SAE vehicle of the Piratas do Vale Team of Unesp Guaratinguetá. In the development of the thesis, a flowchart, developed by the team, was used, which includes a theory part and also the choice of shelf components. In this Project, the type of gearbox was chosen, besides the calculation of axles, gears, bearings and sealers, and software simulations were done for the critical parts. The transmission, developed in this thesis, is more complex than the current one used by the team, but the new one shows improvements, as a new reverse gear with high torque

Análise de ordem de uma bancada experimental aplicada ao estudo de rotores

In this work the main concepts to apply to dynamic signal analysis technique for rotating machines known as order analysis, discussing their characteristics and applying it on an experimental test rig. It aims to characterize the dynamic behavior of experimental test rig in run up and run down tests, it's operational speed range and the identification of the critical speed of shaft rotation. The results of the critical speed and stationary natural frequency of the shaft are discussed