Germinação de sementes de romäzeiras (Punica granatum L.) de acordo com a concentração de giberelina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Superação da dormência de sementes de Tucum (Astrocaryum huaimi Mart.)

The objective of this study was to evaluate the effect of immersion for varying periods in different concentrations of gibberellic acid and separate methods of scarification on the germination of seeds tucum. In the first trial, testing different soaking periods (24 and 48 hours), different forms of soaking (fast and slow) and different concentrations of gibberellic acid (0, 100 and 200 mg L-(1)) compared to the control (water) under completely randomized design in a factorial 2x2x3. The second experiment evaluated the different scarification treatments being: physical (seed coat removal in the hilar region with the aid of a scalpel), chemical (sulfuric acid 98 PA for 2:04 minutes) and thermal (hot water at approximately 98 degrees C and cold water at about 2 degrees C for 4 minutes). In the first trial were evaluated % of contaminated seeds (seeds infected by microorganisms) and hard seeds (who did not start the germination process, but not soiled), and in the second we assessed germination percentage (%) every two days for three months; germination Speed Index (GSI), time to occurrence of 50 % germination (T50) and Emergency Speed Index (ESI). The use of gibberellic acid was ineffective in promoting germination of Tucum (Astrocaryum Huaimi Mart.). Scarification treatments were effective in promoting germination and emergence of seedlings in the nursery and the most efficient physical removal scarification of the seed coat in the hilar region with the highest percentage of germination.

Crescimeno de apatita na superfície da liga Ti-7, 5Mo empregando tratamento higrotérmico

The objective of the present work was to evaluate surface of experimental alloy Ti-7.5Mo after hydrothermal treatment. Ingots were obtained in arc melting furnace under an argon atmosphere and then homogenized under vacuum at 1100ºC for 86.4 ks to eliminate chemical segregation and after cold worked discs were cutting and grinding. For surface treatment, samples were immersed in a container with NaOH aqueous solution 5M, autoclaved, washed with distilled water. Followed, samples were heat treated and they were soaking in 5xSBF to form an apatite layer on the surface. Surfaces were investigated by, scanning electron microscopy, X-Rays powder diffraction, atomic force microscopy and contact angle, in order to evaluate the wettability of the alloy surface. The results were compared with our previous studies using the group of chemical surface treatments and results shows better condition is 120 minutes in the autoclave

Desenvolvimento de filmes finos de Bi3NbO7 pelo método dos precursores poliméricos em diferentes eletrodos óxidos

Technology always advances and thus the device miniaturization and improved performance, besides multifunctionality, they become extremely necessary. A wave of research on the area tends to grow in number and importance in today's market, it is necessary to search for new materials, new applicability of the existing ones and new processes for increasingly cheaper costs. Dielectric materials are considered a key element in this sector being the main electrical properties its high dielectric constant and low dielectric loss. The Polymeric Precursor Method appears as a good alternative because is a low cost, simple process with controlled stoichiometry. In this method, two steps were performed. In a first step, the precursor solution was decomposed into powders and in a second step the precursor solution was converted in thin films. In this work, was used the polymeric precursor methods to get thin films where they were heat treated and characterized by XRD, SEM and AFM. We have obtained Bi3NbO7 thin films with good homogeneity and uniform distribution of grains were noted. We observed that the best condition to obtain the tetragonal phase is annealing the film at high temperatures for a longer soaking time and with excess of bismuth. Several oxides electrodes were evaluated aiming to obtain textured dielectric thin films

Expressão de genes no embrião e endosperma durante a germinação de sementes de lobeira (Solanum lycocarpum St. Hill)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Eradication of a Mature Methicillin-Resistant Staphylococcus aureus (MRSA) Biofilm From Acrylic Surfaces

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Photoluminescence of BaZrO3 explained by a order/disorded transformation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização física e química dos frutos nos diferentes quadrantes da planta e germinação de sementes do portaenxerto cítrico tangerineira ‘sunki’

The tangerine 'Sunki' are highly relevant for the Brazilian citrus industry by presenting important traits for genetic improvement and to be considered a great portaenxento. In this context, the objective of the present work to study the characterization of the fruits of citrus rootstock 'Sunki', depending on the position on the plan and also the germination of their seeds. The physical characteristics evaluated were fruit weight, longitudinal and equatorial diameters of the fruit longitudinal diameter / equatorial diameter, number of buds per fruit, weight of buds and bark and number of viable seeds per fruit. As for the chemical characterization was evaluated titratable, acidity, soluble solid, "Ratio", pH and vitamin C. For the evaluation of these variables, the fruits were obtained from the northeast, southwest, northwest and southeast quadrants. Regarding the evaluation of seed germination, different doses of gibberellic acid and Stimulate were used. The seeds extracted from ripe fruit, washed, dried in the shade and stored in BOD. Immediately after, they were treated for 24 hours with plant growth regulators. After soaking, the seeds were placed in a germinator in germitest paper. After initiation of the germination process, the evaluations were performed daily until the thirty- fourth day. Fruits of 'Sunki'mandarin with uneven as the fruit position within the canopy, the use of gibberellic acid and growth promoter is promising for commercial use on seed germination of this rootstock.

Supercritical carbonation treatment on extruded fibre-cement reinforced with vegetable fibres

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interaction between recrystallization and strain-induced precipitation in a high Nb- and N-bearing austenitic stainless steel: influence of the interpass time

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Accelerated aging and electrical conductivity tests in crambe seeds

The aim of this study was to adapt the methodology of the accelerated aging and electrical conductivity tests for determination of physiological potential in crambe seeds. Six seed lots of crambe (cv. FMS Brilhante) were subjected to determination of moisture content, germination test, first count germination, emergence, and emergence speed index. For the accelerated aging test, the traditional methodology was used with water, and with a saturated potassium chloride and sodium chloride solution in three periods of exposure (24, 48, and 72 hours) at 41 degrees C; the electrical conductivity test was performed with four pre-soaking treatments (0, 2, 4, and 8 hours) and four soaking periods (4, 8, 16, and 24 hours) at 25 degrees C. The accelerated aging test with water for 72 hours and the electrical conductivity test with 2 hours of pre-soaking and assessment after 16 hours were effective for classification of the crambe seed lots in regard to physiological quality.

Characterization of calcium phosphate coating produced by biomimetic method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bond strength of artificial teeth attached to a microwave-polymerized denture base resin after immersion in disinfectant solutions

To evaluate the bond strength between two types of acrylic resin teeth and a microwave denture base resin after immersion in disinfectant solutions for 180 days. Eighty specimens made of acrylic resin teeth (Biotone and Biotone IPN) attached to a microwave polymerized denture base resin (Nature-Cryl MC) were divided into eight groups (n = 10) according to the treatment (distilled water-control, 2% chlorhexidine digluconate, 1% sodium hypochlorite and sodium perborate solution-Corega Tabs). The shear strength tests (MPa) were carried out using a universal testing machine with a 0.5 mm/min speed. Data analysis was performed using ANOVA and multiple comparison Student-Newman-Keuls post hoc test (α = 0.05). Biotone IPN showed similar results among the groups (distilled water, 8.25 ± 1.81 MPa; chlorhexidine, 7.81 ± 3.34 MPa; hypochlorite, 7.75 ± 3.72 MPa; and Corega Tabs, 7.58 ± 2.27 MPa, whereas Biotone showed significantly lower shear bond strength values for the groups immersed in Corega Tabs (5.25 ± 3.27 MPa) and chlorhexidine (6.08 ± 2.35 MPa). Soaking the dentures in 1% sodium hypochlorite could be recommended as a disinfectant solution for dentures fabricated with conventional acrylic resin denture teeth and microwave denture base resin. For dentures fabricated with IPN teeth and microwave denture base resin, all the soaking solutions evaluated in this study could be suggested to denture wearers.

Teste de condutividade elétrica para avaliação da qualidade fisiológica de sementes de gergelim (Sesanun indicum L.)

Two experiments were conducted in order to study the effects of seed number, temperature and time of soaking sesame seeds on the results of the electrical conductivity test for physiological quality of seeds. In the experiment I evaluated the electrical conductivity varying the number of seeds (25, 50 and 100) and temperature (20, 25 and 30° C) in experiment II is different soaking periods (2, 4, 6, 8, 12, 16, 20 and 24 h). The tests were performed with three cultivars (cv. Trebol, cv. Cnpa G4 e cv. Comum). The treatments in factorial 3x3x3 and 3x8 in experiments I and II, respectively. The experimental design was completely randomized, with four replications. Means were compared by Tukey test at 5% probability. The characterization of cultivars held through the germination and vigor tests (physical, physiological and biochemical), which rated the Trebol cultivar seeds with better physiological then the Cnpa G4 and Comum. The electrical conductivity test was conducted with four sub-samples of 25 pure seeds soaked in 75 mL of deionized water at 25° C, to separate the lots from 2 hours of soaking, being feasible to evaluate the quality sesame seeds.

Pré-tratamentos com luz em sementes de tomateiro para indução de tolerância ao déficit hídrico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)