Phase behavior of synthetic amphiphile vesicles investigated by calorimetry and fluorescence methods

The understanding of biological membranes may be improved by investigating physical properties of vesicles from natural or synthetic amphiphiles. The application of vesicles as mimetic agents depends on the knowledgment of their structure and properties. Vesicles having different curvature and size may be obtained using different preparation protocols. We have used differential scanning calorimetry (DSC) and steady-state fluorescence to investigate the gel to liquid-crystal phase transition of vesicles prepared by sonication (SUV) and non-sonication (GUV) of the synthetic dioctadecyldimethylammonium bromide (DODAB) in aqueous solution. DSC thermograms for a non-sonicated dispersion show a well-defined pre- and main transition corresponding to two narrow peaks at 36 and 45°C in the first upscan, while in a second upscan, only the main peak was observed. The sharpness of the peaks indicate a cooperative phase behavior for GUV. For a sonicated DODAB dispersion, the first upscan shows a third peak at 40.3°C, whereas for the second upscan the peaks are not well-defined, indicating a less cooperative phase behavior. Alternatively, the fluorescence quantum yield (Φ f) and the anisotropy (r) of trans, trans, trans-1-[4-(3-carboxypropyl)-phenyl]-6-[4-butylphenyl]-1,3,5-hexatriene (4H4A) and the ratio I 1/I 3 of the first to the third vibronic peaks of the pyrene emission spectrum as function of temperature are used as well to describe the phase behavior of DODAB sonicated and non-sonicated dispersions. It is in good agreement with the DSC results that the cooperativity of the thermotropic process is diminished under sonication of the DODAB dispersion, meaning that sonication changes from homogeneous to heterogeneous populations of the amphiphile aggregates. The pre- and main transitions obtained from these techniques are in fairly good accord with results from the literature.

Healing process of dog dental pulp after pulpotomy and pulp covering with mineral trioxide aggregate or Portland cement.

Considering several reports about the similarity between the chemical compositions of the mineral trioxide aggregate (MTA) and Portland cement (PC), the subject of this investigation was to analyze the behavior of dog dental pulp after pulpotomy and direct pulp protection with these materials. After pulpotomy, the pulp stumps of 26 roots of dog teeth were protected with MTA or PC. Sixty days after treatment, the animal was sacrificed and the specimens removed and prepared for histomorphological analysis. There was a complete tubular hard tissue bridge in almost all specimens. In conclusion, MTA and PC show similar comparative results when used in direct pulp protection after pulpotomy.

Behavior of the wild coriander (eryngium foetidum L.) in subtropical conditions

The adaptability of wild coriander (Eryngium foetidum L.) a seasoning and medicinal herb indigenous of the Amazon region was evaluated in a subtropical city of Sao Paulo, Brazil. Germination of seeds was extremely irregular with the first seeds germinating 10 days after the sowing, but the process lasted 90 days. The exploitation of this specie is possible in subtropical conditions without interruption of production but further study on the feasibility elimination of seed and flower are necessary to permit a greater yield of foliage.

Short-chain di-ureasil ormolytes doped with potassium triflate: Phase diagram and conductivity behavior

Di-urea cross-linked poly(oxyethylene)/siloxane hybrids, synthesized by the sol-gel process and containing a wide concentration range of potassium triflate, KCF3SO3, have been analyzed by x-ray diffraction and differential scanning calorimetry. The pseudo-phase diagram proposed has been taken into account in the interpretation of the complex impedance measurements. The xerogels prepared are obtained as transparent, thin monoliths. At room temperature the highest conductivity found was 2 × 10-6 Ω-1 cm-1.

Foraging Behavior and Subtask Hierarchical Structure in Acromyrmex spp. (Hymenoptera: Formicidae)

This study considers the function and complexity of tasks during foraging of three Acromyrmex species. Foraging was classified as a team task composed of 2 or 3 processes: recruitment, selection, and collection. Each process was subdivided into different subtasks. Points were attributed to subtasks considering their hierarchical level to compare the complexity of foraging among species. Total scores obtained were 19 for A. balzani and 14 for A. crassispinus and A. rugosus, indicating different degrees of social complexity for grass-cutting and leaf-cutting ant species. Acromyrmex balzani, a grass-cutting ant species, shows a behavioral repertoire composed of more variable subtasks during foraging.

Study on the behavior of the Minimum quantity lubricant - MQL technique under different lubricating and cooling conditions when grinding ABNT 4340 steel

The behavior of the minimum quantity lubricant (MQL) technique was analyzed under different lubricating and cooling conditions when grinding ABNT 4340 steel. The comparative analysis of the residual stress values showed that residual compressive stresses were obtained under all the lubrication/cooling conditions and types of abrasive tools employed. The highest residual compressive stress obtained with the aluminum oxide grinding wheel with MQL under the condition of V= 30m/s for air and V= 40ml/h for lubricant was -376MPa against the -160MPa attained with conventional cooling, representing a 135% increase in residual compressive stress. The results show that method and quantity of lubricant and cooling are factors that influence the grinding process.

Dielectric behavior of XLPE aged under multi-stressing conditions

In this work fresh cables were laboratory aged under multi-stressing conditions at room temperature. Foils were peeled from cables, with approximately 150 ?m thickness, from the outer, middle and inner positions of the XLPE cable insulating layer. For samples obtained from the outer cable layer position, an increasing near-permanent electrical conduction process with aging time was observed. At the middle and inner cable layer positions a flat-loss relaxation process was observed becoming a dominating process on the ageing. In addition, PEA results confirmed that degradation in the outer region of the XLPE cables arises from the simultaneous presence of dipoles and injected space charge that distorts the internal electric field on the ageing.

Magnetic resonance study of the crystallization behavior of InF3-based glasses doped with Cu2+, Mn2+ and Gd3+

The crystallization of fluoroindate glasses doped with Gd3+, Mn2+ and Cu2+ heat treated at different temperatures, ranging from the glass transition temperature (Tg) to the crystallization temperature (Tc), are investigated by electron paramagnetic resonance (EPR) and 19F nuclear magnetic resonance (NMR). The EPR spectra indicate that the Cu2+ ions in the glass are located in axially distorted octahedral sites. In the crystallized glass, the g-values agreed with those reported for Ba2ZnF6, which correspond to Cu2+ in a tetragonal compressed F- octahedron and to Cu2+ on interstitial sites with a square-planar F- co-ordination. The EPR spectra of the Mn2+ doped glasses exhibit a sextet structure due to the Mn2+ hyperfine interaction. These spectra suggest a highly ordered environment for the Mn2+ ions (close to octahedral symmetry) in the glass. The EPR spectra of the recrystallized sample exhibit resonances at the same position, suggesting that the Mn2+ ions are located in sites of highly symmetric crystalline field. The increase of the line intensity of the sextet and the decrease of the background line in the thermal treated samples suggest that the Mn2+ ions move to the highly ordered sites which contribute to the sextet structure. The EPR spectra of the Gd3+ doped glasses exhibit the typical U-spectrum of a s-state ion in a low symmetry site in disordered systems. The EPR of the crystallized glasses, in contrast, have shown a strong resonance in g ≈ 2.0, suggesting Gd3+ ions in environment close to cubic symmetry. The 19F NMR spin-lattice relaxation rates were also strongly influenced by the crystallization process that takes over in samples annealed above Tc. For the glass samples (doped or undoped) the 19F magnetization recoveries were found to be adjusted by an exponential function and the spin-lattice relaxation was characterized by a single relaxation time. In contrast, for the samples treated above Tc, the 19F magnetization-recovery becomes non-exponential. A remarkable feature of our results is that the changes in the Cu2+, Mn2+, Gd3+ EPR spectra and NMR relaxation, are always observed for the samples annealed above Tc. © 2006 Elsevier B.V. All rights reserved.

Setting the preheating process of electronic ballasts for hot-cathode fluorescent lamps, considering the Rh/Rc ratio

This paper presents a new model for the representation of the electrodes filaments of fluorescent lamps, during their preheating, and an analysis capable to guide the design of the preheating process in electronic ballasts. The main improvement obtained with the lamp model is the accurate theoretical reproduction of the behavior of the Rh/Rc ratio during the preheating process. In addition, using the proposed methodology based on the lamp model, it is possible to set a proper preheating process to the electrodes filaments, without the necessity of exhaustive empirical adjustments in the prototype, reducing time and costs involved in the design of ballasts with preheating capabilities. © 2006 IEEE.

Enterprise systems modeling: The ERP5 development process

The design and implementation of an ERP system involves capturing the information necessary for implementing the system's structure and behavior that support enterprise management. This process should start on the enterprise modeling level and finish at the coding level, going down through different abstraction layers. For the case of Free/Open Source ERP, the lack of proper modeling methods and tools jeopardizes the advantages of source code availability. Moreover, the distributed, decentralized decision-making, and source-code driven development culture of open source communities, generally doesn't rely on methods for modeling the higher abstraction levels necessary for an ERP solution. The aim of this paper is to present a model driven development process for the open source ERP ERP5. The proposed process covers the different abstraction levels involved, taking into account well established standards and common practices, as well as new approaches, by supplying Enterprise, Requirements, Analysis, Design, and Implementation workflows. Copyright 2008 ACM.

Optimal clone identifier based on dynamic rules and process algebra

The rule creation to clone selection in different projects is a hard task to perform by using traditional implementations to control all the processes of the system. The use of an algebraic language is an alternative approach to manage all of system flow in a flexible way. In order to increase the power of versatility and consistency in defining the rules for optimal clone selection, this paper presents the software OCI 2 in which uses process algebra in the flow behavior of the system. OCI 2, controlled by an algebraic approach was applied in the rules elaboration for clone selection containing unique genes in the partial genome of the bacterium Bradyrhizobium elkanii Semia 587 and in the whole genome of the bacterium Xanthomonas axonopodis pv. citri. Copyright© (2009) by the International Society for Research in Science and Technology.

An investigations on local and global behavior of a (SMA) oscillator of 3 - DOF driven by a limited power supply

SMART material systems offer great possibilities in terms of providing novel and economical solutions to engineering problems. The technological advantages of these materials over traditional ones are due to their unique microstructure and molecular properties. Smart materials such as shape memory alloys (SMA), has been used in such diverse areas of engineering science, nowadays. In this paper, we present a numerical investigation of the dynamics interaction of a nonideal structure (NIS). We analyze the phenomenon of the passage through resonance region in the steady state processes. We remarked that this kind of problem can lead to the so-called Sommerfeld effect: steady state frequencies of the DC motor will usually increase as more power (voltage) is given to it in a step-by-step fashion. When a resonance condition with the structure it is reached, the better part of this energy it is consumed to generate large amplitude vibrations of the foundation without sensible change of the motor frequency as before. The results obtained by using numerical simulations are discussed in details. Copyright © 2009 by ASME.

Study of the electrochemical behavior of histamine using a Nafion®-copper (II) hexacyanoferrate film-modified electrode

A study on the electrochemical behavior of histamine species in aqueous medium is described. A glassy carbon electrode chemically modified with copper (II) hexacyanoferrate (CuHCFe) film and covered with Nafion® film was employed. The interaction between the analyte and the CuHCFe film can be demonstrated by a decrease in both the cathodic and anodic peak currents at 0.68V (vs. Ag/AgCl), attributed to the film and the appearance of new peak current at 0.47V. Cyclic voltammetric parameters obtained for histamine indicate the formation of stable complex between histamine adsorbed at the electrode surface. The dependence of peak currents on the concentration of the analyte is not linear in the employed work range, indicating the presence of a coupled chemical reaction in the electrodic process. © 2010 by ESG.

Predatory behavior of Canthon virens (Coleoptera: Scarabaeidae): A predator of leafcutter ants

We present a detailed description of the predatory behavior of the beetle Canthon virens Mannerheim, 1829, on the leafcutter ant Atta sp. We observed 51 acts of predation, which were also recorded on film and subjected to behavioral analysis. Canthon virens exhibited 28 behaviors while predating upon Atta sp. queens. Adult beetles search for queens while flying in a zigzag pattern, 15 to 20cm above the ground. After catching a queen, the predator stands on its back and starts cutting the queen cervix. Once the prey is decapitated, the predator rolls it until an insurmountable obstacle is reached. The distance from the site of predation to the obstacle can vary widely and is unpredictable. The beetle rolling the queen also buries it in a very peculiar way: first, it digs a small hole and pulls the queen inside, while another beetle is attached to the prey. The burial process takes many hours (up to 12) and may depend on the hardness of the soil and the presence of obstacles. In general, one or two beetles are found in a chamber with the queen after it is buried. They make the brood balls, which serve as food for the offspring. This study contributes to the knowledge of the predatory behavior of Canthon virens, a predator poorly studied in Brazil and widespread in the country. Copyright © 2012 Luiz Carlos Forti et al.

Some aspects of chicken behavior and welfare

Brazil is the world leader in broiler production and export. It achieved this position mainly to its excellent supply chain structure and climate, which favor poultry and grain production throughout its territory. Although Brazilian egg production is not as important as broiler production, this segment presents great potential of increasing its share in the global market. However, as elsewhere in the world, Brazilian poultry production faces the challenge to balance two elements within its supply chain: cruelty and productivity. The consumers of the European Union (EU) are very concerned with animal welfare issues. In order to increase its share in the European market, and eventually in the world market, Brazilian poultry producers must understand the effects of production systems on poultry welfare, and try to develop systems that are suited for its climate and other production conditions. There is a consensus that the natural behaviors performed by poultry in intensive production systems allow better welfare. This objective of this review is to present scientific research studies that relate different behaviors to chicken welfare. Poultry behavior is a reflex of their welfare status at a particular moment, and it is related to internal (physiological) and external (environmental) factors. Several natural behaviors that favor welfare, as well as undesirable behaviors, may be stimulated by environmental enrichment. The correct interpretation of the behaviors expressed by poultry, including their frequency, duration, and sequence, may be used to estimate their welfare. Animal production is an import sector of Brazilian economy. It significantly contributes to the Gross Domestic Product (GDP), in terms of products destined both to domestic consumption and exports. New technologies applied to products and management practices have been developed for field application, aiming at improving producers' productivity and profitability. In order to comply with the European Union's (EU) guidelines for animal protein production, Brazilian poultry production needs to undergo a process of adaptation. In May, 2007, the EU Commission established its new guidelines for animal welfare in poultry production, pressured by consumer demand. In the EU, there is a growing concern among consumers as to how poultry are reared and slaughtered. European consumers are in the fore front of the demand of high quality products produced with under better welfare conditions, and have spread this concern throughout the world. Beaumont et al. (2010) mentioned that European consumers frequently perceive that standard commercial poultry production has poor animal welfare practices. According to Nääs et al. (2008), Brazilian poultry production today needs to find a balance between cruelty and productivity. In fact, ensuring animal welfare may provide better financial results, as it increases the producer's profit margins and allows maintaining Brazilian chicken export quotas to the EU. França (2008) noted that biological studies that define ethical limits and guidelines for poultry production foster the development of new production practices that may ensure good product quality and productivity without putting bird welfare at risk. Gonyou (1994) states that, when animal welfare started to be studied, the only behavioral factors considered were those related to feeding and reproduction. These first studies used as indicators of animal welfare reduced life expectancy, impaired growth, impaired reproduction, body damage, disease, immunosuppression, adrenal activity, behavior anomalies, and self-narcotization (Broom, 1991). However, current studies evaluate additional indicators, such as natural behaviors, behavioral needs, preferences, behavioral problems, emotional state, cognitive abilities, etc. In the field of ethology, the expression of natural behavior is a frequently used tool used to estimate the welfare of poultry destined to human consumption. According to Bracke & Hopster (2006), natural behavior can be defined as the behavior the animal normaly presents when exposed to conditions similar to its natural habitat. Natural behaviors are pleasurable and promote biological functions that are meaningful to the animal's welfare. The definition of natural behavior, though, does not include the bird's behavior when sick, in flight or during aggression, since these are not considered pleasurable situations. Considering layer behavioral needs in the design of housing facilities optimize their welfare. Mishra et al. (2005) verified that ISA Brown layers spent, during 24 hours, around 97% of the time in the nest, feeding, walking, resting, or dust bathing, and that 57% of these behaviors did not depend on environmental enrichment. It was also observed that hens had preferred behavioral sequences, which included foraging and comfort behaviors, such as wing-stretching and preening. The present review aims at discussing, albeit not exhaustively, scientific research studies on the behavior of Gallusgallus domesticus and its relationship to welfare. The following behaviors are reviewed: feather pecking, scratching, dust bathing, nesting, locomotion activities, and aggressive behaviors. These behaviors are the most frequently observed in commercial broiler, broiler breeder, and layer farming, and therefore, monitoring their incidence may contribute to measure poultry welfare.