Analise do sistema de medição em peças aeronaúticas através do estudo de R&R (repetibilidade e reprodutibilidade)

The Measurement System Analysis (MSA - Measurement System Analysis) is a statistical methodology developed to study and analyze the behavior of the measurement systems, and, therefore, allow the increased of the confidence readings performed by measuring instruments. It’s widely used in the automotive industry since the 90’s and is a mandatory requirement for the approval of the parts according to ISO Standard of the automotive sector. However, the aerospace industry doesn’t require this type of Study, once which the vast majority of aeronautics parts have characteristics (dimensions) with very tight tolerances, closed, ie, at the home of microns. This work aims to create lists of recommendations for definitions of measuring instruments in developing of control plans, which correlates tolerances fields of characteristics for different settings and acceptance of the instrument, classified as optimum, recommended and not recommended, through of the study of R&R (Repeatability and Reproducibility) in aeronautics parts. Every methodology of the experimental part was based on modern strategy of continuous improvement, the DMAIC (Define Measure Analyze Implant Control), in order to achieve better measurement method used in the control of milling aeronautics parts, identifying and reducing the variations of the measurement process. The results of the R&R Study in large part of measuring instrument manuals were considered acceptable and/or recommended, ie with values of %P/T and %RR lower than 30%, providing statistical data which have enabled the elaboration of tables of recommendations, which, from this work, have turned into very important documents and aid for Process Engineering, having in their hands a technical study able to identify which is the most appropriate instrument to get a more robust dimensional... (Complete abstract click electronic access below)

Reposição florestal obrigatória no município de Presidente Venceslau

The growing concern over deforestation of native forests from Brazil to the marketing of wood in various sectors had made greater attention from lawmakers. In this context, did the reforestation, which came into existence to meet the demand for forest raw material. This paper attempts to make a survey, focusing on the interplay between small and medium producers, consumers of forest products and reforestation associations. For this, we conducted a survey of legislation at the federal and state since the emergence, evolution and current context for understanding the legal basis on the subject. In addition, literature reviews have been made seeking to direct the concepts and importance of reforestation, reforestation, forest plantations and productive use of the species Eucalyptus sp for the supply of forest raw material. Approach was also sought on the structure of the system of reforestation of the state of Sao Paulo and their assignments. We also present an in loco study of Chairman Wenceslas municipality in order to analyze the participation of the municipality in the reforest the region of Pontal Paranapanema and actions of regulatory agencies. As a result presents a survey of consumers of timber enterprises in the municipality of President Wenceslas based on the resolution SMA No. 082/2008, which describes the characteristics of these companies and their fields of activity

Concentração de tensões em peças e componentes estruturais - uma abordagem através do método dos elementos finitos

Any failure process that may occur in a part probably is located where the stress exceeded the level of resistance. When a part or component has a sharp change in geometry, such as slots, holes, grooves, bumps or other irregularities, there is an increased concentration of stress at a specific location of the part. The objective of this study is to determine the maximum stresses in structural parts and components using the equations of elasticity theory in conjunction with the stress concentration factor experiment and compare them with results obtained by finite element method

Processamento de peças em materiais compósitos para o projeto BAJA SAE

The weight of a vehicle has always been considered an extreme important factor, because it interferes in the performance, steering, consume, environmental impact, wear of components, among the others. Because of the new demand, consume reduction aim and gases emission increased the necessity to manufacture lighter vehicles, guaranteeing the complying with the gas emission international law. Besides the legal demand, the low weight will certainly be essential for the competitiveness for the next generation of vehicles. It is with this thinking the composite materials have been introduced in the automobilist industry, because those materials show an excellent relation of strength/weight, providing a reduction of consume and the increase of load capacity. Those factors justify the increase of interest of industry and the necessity of optimization of those materials and of their process. For this research, the field of application will be the Baja SAE Project, a project that is fully developed by engineering students, where they build a prototype single seat, off-road category, for use on hilly slopes with obstacle. This research aims to study two key components of the prototype are made of composite materials, analyzing all the processing. In addition, there is the analysis of the viability of this production parts to a Baja SAE vehicle, in order to increase their performance and reduce their weight without reducing the safety and robustness of the prototype. It was possible to achieve weight reduction of the steering subsystem with manufacturing the flywheel hybrid composite (carbon/glass) and the replacement of SAE 1010 steel by hybrid composite (carbon/aramid) in CVT box. The importance of this study is to obtain a good project for the vehicle of technical and scientific manner, contributing to the know-how to the team and providing a basis for optimization for upcoming projects

Padronização de técnica histoquímica de mensuração de lipídios da epiderme de cães e mensuração de lipídios da epiderme de cães atópicos antes e após reposição tópica de lipídios e ceramidas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação entre a variação da pressão de pulso e o índice de variabilidade pletismográfica como índices dinâmicos de pré-carga em cães anestesiados com isoflurano submetidos à hemorragia hipotensiva por reposição volêmica

Pós-graduação em Anestesiologia - FMB

A recepção crítica das peças de Victor Hugo na França e no Brasil

Les premières pièces de Victor Hugo ont été les responsables d'une véritable révolution dans l'histoire de las Litterature Française, mais elles n'ont pas eu une acceptation immédiate de la part de la critique, qui s'est partagée entre les partidaires des romantiques et, par conséquent, de nouvelles idées diffusées par le Cénacle et les classiques, les adversaires des jeunes écrivains qui ont embrassé les concepts hugoliens, Au Brésil, la réacrion a été postérieure, mais identique. Qualqu'on ne trouve pas dans les journaux des discussions à propos de la nouvelle école, des nouvelles idées ont été, au début, rejetées par les intellectuels brésiliens et, quelque temps plus tard, adoptées par les écrivains désirant créer un théâtre national basé sur les prinipes défendus par Victor Hugo, le porte-parole du mouvement romantique.

Efeito da ovariectomia e da reposição hormonal no reimplante dentário imediato: análise histomorfométrica e imunoistoquímica em ratas

Pós-graduação em Odontologia - FOA

A influência do tamanho de grão ferrítico da peça na integridade superficial de peças erodidas

Pós-graduação em Engenharia Mecânica - FEIS

A influência das variáveis do lixamento tubular na qualidade das peças de Eucalyptus grandis

In 2010, the Brazilian forest sector is represented by about 30,000 companies producing US$ 21 billion annually and account for approximately 5% of the gross domestic product (GDP) in the country. The sanding process is highly demanded in various stages of industrialization of the wood, when there is a need for a better quality surface finishing. The objective of this work was to analyze the influence of cutting speed and sandpaper granulometry on both the surface finishing of pieces of Eucalyptus grandis processed through tubular sanding and on the sanding efforts (force and power of sanding). Four cutting speeds were used (19.5, 22.7, 26 and 28.1 m/s), one advance speed (16 m/min) and three sets of sandpaper (80-100, 80-120 and 100-120) being one for chipping and another for finishing, respectively. A central data acquisition system was set up to capture the variables (cutting power, acoustic emission and vibration) in real time. The cutting force was obtained indirectly, through a frequency inverter. The roughness of the parts was measured by a roughness meter before and after sanding. The highest cutting speed used (28.1 m/s) consumed more power and generated more acoustic emission among the four speeds tested. Regarding the vibration, the lower cutting speed (19.5 m/ s) generated the highest vibration in the sander machine. It is concluded that the range of 100-120 sandpapers resulted in values of average roughness (Ra) lower than the other sets of sandpaper used, as it resulted in better surface finishing.

Comparação entre índices dinâmicos e volumétricos de pré-carga em cães submetidos à hemorragia moderada seguida de reposição volêmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A importância da irrigação em pequenas e médias propriedades da região de Presidente Prudente-SP

A produção de alimentos é uma atividade essencial para a existência humana que demanda efetivamente muita água. A chuva é a sua principal fonte e, na falta desta, a irrigação supre essa necessidade, de forma parcial ou integral. A proposta do presente trabalho é levantar informações quantitativas e qualitativas a respeito de pequenas e médias propriedades da região de Presidente Prudente - SP que praticam a agricultura irrigada e apresentar, com base nos dados obtidos em pesquisa de campo, a importância da irrigação na região. Nesta pesquisa, no total foram entrevistados 28 produtores da região. Quanto à gestão do sistema, a pesquisa mostrou que poucos produtores detêm conhecimento e controle de informações para avaliar o incremento em relação à produtividade e a renda. Custos de implantação e manutenção dos sistemas, custo com energia elétrica e dificuldades com reposição de peças desgastadas e/ou danificadas, são apontadas como entraves no processo produtivo quando se utiliza algum sistema de irrigação. Já em relação ao grau de satisfação dos produtores quanto aos sistemas de irrigação que se encontram instalados em suas propriedades, o resultado é bastante positivo. Além do aumento de produtividade e aumento de renda, os produtores pontuaram benefícios tais como a possibilidade de sustentar suas famílias com uma pequena área de plantio, a permanência do homem no campo e a possibilidade de produzir em épocas de seca.

A “didática” nas peças didáticas de Bertolt Brecht: ensino em cena

Pós-graduação em Educação Escolar - FCLAR

Estudo comparativo para fabricação de peças aeronáuticas: forjamento x usinagem

This paper shows a technical-economic analysis of the substitution of raw material machined metal parts for a forged preform. At the end, it shows that the economic gain by the machining process substitution for a forged preform is significant for the samples analysed