NEST REUSE AND COMMUNAL NESTING IN MICROTHURGE-CORUMBAE (HYMENOPTERA, MEGACHILIDAE), WITH SPECIAL REFERENCE TO NEST DEFENSE

Observations on the nesting activities of Microthurge corumbae, carried out at the University Campus of Ribeirao Preto, São Paulo, Brazil, from 1977 to 1981, indicated that 61.9% of nests were re-used by succeeding generations. Re-use by one generation was more frequent than by two generations, and re-use by a third was observed only once. Nests were re-used by one or several females. Single females were more frequently in the first re-use. In these cases nest re-use did not differ essentially from the solitary foundation of a new nest, except for the adoption of a pre-existing nest without excavation. In multifemale nests, analysis of relative age (wing wear), ovarian and spermathecal conditions of associated females and the content of nests at excavation indicated that the social pattern in such colonies is communal. There is some evidence that the associated females are relatives. The chalcidoid wasp Leucospis was the principal nest parasite, and ants of the genus Crematogaster were nest predators. In multifemale nests, the rate of parasitism was significantly lower than in solitary nests, indicating that nest-sharing resulted in improved nest defense. on the other hand. The absence of predation on immatures of the first generation of M. corumbue in multifemale nests suggests that such nests are also more resistant to attack by predators.

Plasma immersion ion implantation of nitrogen into H13 steel under moderate temperatures

Ion implantation of nitrogen into samples of tempered and quenched H13 steel was carried out by plasma immersion technique. A glow discharge plasma of nitrogen species was the ion source and the negative high voltage pulser provided 10-12 kV, 60 mu s duration and 1.0-2.0 kHz frequency, flat voltage pulses. The temperatures of the samples remained between 300 and 450 degrees C, sustained solely by the ion bombardment. In some of the discharges, we used a N-2 + H-2 gas mixture with 1:1 ratio. PIII treatments as long as 3, 6, 9 and up to 12 h were carried out to achieve as thickest treated layer as possible, and we were able to reach over 20 mu m treated layers, as a result of ion implantation and thermal (and possibly radiation enhanced) diffusion. The nitrogen depth profiles were obtained by GDOS (Glow Discharge Optical Spectroscopy) and the exact composition profiles by AES (Auger Electron Spectroscopy). The hardness of the treated surface was increased by more than 250%, reaching 18.8 GPa. No white layer was seen in this case. A hardness profile was obtained which corroborated a deep hardened layer, confirming the high efficacy of the moderate temperature PIII treatment of steels. (c) 2005 Elsevier B.V. All rights reserved.

Structural characterization of undoped and Sb-doped SnO2 thin films fired at different temperatures

SnO2 thin films were obtained by the sol-gel method starting from inorganic precursor solutions. In this work, we compare the structure of undoped and Sb-doped SnO2 films prepared by dip-coating. The films were deposited on quartz substrates and then fired at different temperatures ranging from 383 up to 1173 K. The density and the thickness of the films were determined by X-ray reflectivity (XRR) and their porous nanostructure was characterized by grazing-incidence small angle X-ray scattering (GISAXS). XRR results corresponding to undoped and Sb-doped samples indicate a monotonous decrease in film thickness when they are fired at increasing temperatures. At same time, the apparent density of undoped samples exhibits a progressive increase while for Sb-doped films it remains invariant up to 973 K and then increases for T = 1173 K. Anisotropic GISAXS patterns of both films, Sb-doped and undoped, fired above 573 K indicate the presence of elongated pores with their major axis perpendicular to the film surface. For all firing temperatures the nanopores in doped samples are larger than in undoped ones. This suggests that Sb-doping favours the pore growth hindering the film densification. At the highest firing temperature (1173 K) this effect is reversed.

Nest location, clutch size and nest success in the Scarlet Ibis Eudocimus ruber

Breeding success and nest-site characteristics were studied during the 1996-1997 breeding season in a colony of Scarlet Ibises Eudocimus ruber in south-eastern Brazil to test the hypothesis that nest-site characteristics and clutch size affect nest success. Two nesting pulses produced young, the earlier being more successful. Predation accounted for most failures during the first pulse, wind destruction during the second. A third pulse with few nests produced no young. Adult Ibises abandoned nests when they lost sight of other incubating birds. Logistic regression analysis indicated that nest success during the first pulse was positively related to clutch size, number of nests in the nest tree and in the nearest tree, and negatively to the distance to the nearest neighbour. During the second pulse there were significant negative associations between success, nest height and distance to the fourth nearest nest, and a positive association between success and nest cover. The results agree with the 'selfish herd' hypothesis, indicating that nest aggregation may increase breeding success, but the nest-site characteristics affecting success can differ over the course of one breeding season.

EXPERIMENTAL INCIPIENT NEST TRANSPLANTS AND SURVIVORSHIP OF SOLENOPSIS-INVICTA BUREN (HYM, FORMICIDAE) IN BRAZIL

Transplants of incipient colonies of the fire ant, Solenopsis invicta into areas in which mature colonies had been eliminated did not result in higher rates of success than in areas in which mature colonies were present. However for both types of sites, Pogonomyrmex (Ephebomyrmex) nagelli colonies were found in cleared sites used for transplants, with the number of translocated P. nagelli nests higher in areas which had not been treated with Mirex for S. invicta colony reduction. These results suggest that small colonies may be displaced by larger colonies of other species.

Nest architecture of Atta laevigata (F. Smith, 1858) (Hymenoptera : Formicidae)

The internal structure of three nests of Atta laevigata was studied in Botucatu city, São Paulo State, Brazil. Two nests were excavated through the opening of trenches and one was cement-moulded to enable a better view of the internal structures. The three nests presented a similar structure, with the depths and number of chambers varying as a function of the loose soil area of the nests. The number of chambers ranged from 1149 to 7864, reaching as deep as 7 m underground. Chamber volume ranged from 0.03 to 511. The foraging tunnels extended as far as 70m from the loose soil region. The nests of this species are the deepest within the genus Atta and have the highest number of chambers.

PATTERNS OF COLONIZATION AND INCIPIENT NEST SURVIVAL IN ACROMYRMEX-NIGER AND ACROMYRMEX-BALZANI (HYMENOPTERA, FORMICIDAE)

Patterns of colonization by queens and incipient nest survival of the leaf-cutting ants Acromyrmex niger and Acromyrmex balzani were studied by means of belt transects and individually marked incipient nests. No relation was found between colony density and the number of colonization attempts. Both species are not claustral, and high rates of queen mortality were attributed to conspecific executions and predation. of other discernable mortality factors, failure of fungal garden establishment was the most important. Only 34 of 296 A. balzani and 13 of 154 A. niger marked colonies were alive at the end of one year. These figures are higher than those reported for species of Atta. These results are contrasted with those of claustral-founding Atta species. Small colonies are occasionally raided by larger colonies which robbed brood.

Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures

Statement of problem. Titanium has physical and mechanical properties, which have led to its increased use in dental prostheses despite casting difficulties due to high melting point and formation of oxide layers which affect the metal-ceramic bond strength.Purpose. This in vitro study evaluated the shear bond strength of the interface of 2 dental porcelains and pure titanium injected into a mold at 3 different temperatures.Material and methods. Using commercially pure (cp) titanium bars (Titanium, Grade I) melted at 1668degreesC and cast at mold temperatures of 430degreesC, 700degreesC or 900degreesC, 60 specimens were machined to 4 x 4 mm, with a base of 5 x 1 mm. The 4-mm surfaces were airborne-particle abraded with 100 mum aluminum oxide before applying and firing the bonding agent and evaluating the 2 porcelains (Triceram/Triline ti and Vita Titankeramik). Ten specimens were prepared for each temperature and porcelain combination Shear bond testing was performed in a universal testing machine, with a 500-kg load cell and crosshead speed of 0.5 mm/min. The specimens were loaded until failure. The interfaces of representative fractured specimens of each temperature were examined with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Data for shear bond strength (MPa) were statistically analyzed by 2-way ANOVA and the Tukey test (alpha = .05).Results. The results showed significant differences for the metal/porcelain interaction effect (P = .0464). There were no significant differences for the 2 porcelains (P = .4250). The Tukey test showed a significant difference between the pair cp Ti 430degreesC Triceram and cp Ti 900degreesC Triceram, with respective mean values and SDs of 59.74 +/- 11.62 and 34.03 +/- 10.35 MPa.Conclusion. Triceram porcelain showed a bond strength decrease with an increase in the mold temperature for casting titanium. The highest bond strength for Vita porcelain and the best metal-ceramic interface observed with the SEM were found with the mold temperature of 700degreesC.

Rheological properties of frozen concentrated orange juice (FCOJ) as a function of concentration and subzero temperatures

Data on flow properties of Frozen Concentrated Orange Juice (FCOJ) produced from oranges cv. Pera-Rio (65.04 Brix, 8.8% w/w pulp content, 2.5% w/w pectin, 3.84% citric acid, 1.293 g cm(-3)) from -18 to 0 degrees C were fitted with appropriate predictive models. The power law model was found to be the most appropriate to fit the flow curves obtained for FCOJ between 46.56 and 65.04 degrees Brix. In higher concentrations, thixotropy was observed and showed more temperature dependence. A single equation combining Arrhenius and exponential relationships was applied to describe the temperature effect and shear rate on the quantity of breakdown of FCOJ.

GROWTH AND FERMENTATION CHARACTERISTICS OF NEW SELECTED STRAINS OF SACCHAROMYCES AT HIGH-TEMPERATURES AND HIGH CELL DENSITIES

Maintenance of high cell viability was the main characteristic of our new strains of thermotolerant Saccharomyces. Total sugar conversion to ethanol was observed for sugarcane juice fermentation at 38-40-degrees-C in less than 10 h and without continuous aeration of the culture. Invertase activity differed among the selected strains and increased during fermentation but was not dependent on cell viability. Invertase activity of the cells and optimum temperature for growth, as well as velocity of ethanol formation, were dependent on medium composition and the type of strain used. At high sugarcane syrup concentrations, the best temperature for ethanol formation by strain 781 was 35-degrees-C. Distinct differences among the velocities of ethanol production using selected strains were also observed in sugarcane syrup at 35-38-degrees-C.

Structural electrical and optical properties of undoped and indium doped ZnO thin films prepared by the pyrosol process at different temperatures

The influence of the substrate temperature on the structural features and opto-electrical properties of undoped and indium-doped ZnO thin films deposited by pyrosol process was investigated. The addition of indium induces a drastic decrease (by a factor approximate to 10(10) for samples deposited at 300 degreesC) in the electrical resistivity of films, the lowest electrical resistivity (6 mOmega-cm) being observed for the film deposited at 450 degreesC. Films are highly transparent (>80%) in the Vis-NIR ranges, and the optical band gap exhibits a blue shift (from 3.29 to 3.33 eV) for the In-doped films deposited at increasing temperature. Preferential orientation of the ZnO crystallites with the c-axis perpendicular to the substrate surface and an anisotropic morphology of the nanoporous structure was observed for films growth at 300 and 350 degreesC. (C) 2002 Elsevier B.V. B.V. All rights reserved.

A SAXS study of kinetics of aggregation of TEOS-derived sonogels at different temperatures

The kinetics of aggregation of tetraethoxysilane (TEOS)-derived silica sols, produced by acid-catalyzed and ultrasound-stimulated hydrolysis, were studied by 'in situ' measurements of small-angle X-ray scattering (SAXS) at the temperatures 40 degreesC, 60 degreesC and 70 degreesC. The results were analyzed in terms of the evolution with time (t) of the SAXS intensity probing the mass fractal characteristics of the system, the average radius of gyration (Rc,) of the clusters and the number of primary particles per cluster. The aggregation process yields mass fractal structures which exhibit a scattering exponent (alpha) practically equal to 2, in the probed length scale range (5.3 nm < 1/q < 0.22 nm), beneath and even far beyond the gel point. This suggests that a is a direct measure of the real mass fractal dimension (D) of the structure. The precursor sol (pH = 2) exhibits I nm mean sized clusters with mass fractal dimension D similar to 1.9. Increasing the pH to 4.5, the cluster mean size and the number of primary particles per cluster increase but the system keeps a more opened structure (D similar to 1.4). In the first aggregation stages, D increases up to similar to2 by incorporating primary particles to the clusters without changing their mean size. From this stage, the aggregation progresses following a thermally activated scaling law well described by R-G similar tot(1/D) in all cases. This is indicative of a diffusion-controlled cluster-cluster aggregation process. The activation energy of the process was found to be 91.7 kJ/mol. (C) 2001 Elsevier B.V. B.V. All rights reserved.