Adsorção de cádmio em Latossolos sob vegetação de mata nativa e cultivados

Heavy metals are found naturally in soils at low concentrations, but their content may be increased by human activity, making them one of the barriers in management of tropical soils. These chemical elements can be found in the composition of organic and inorganic fertilizers, insecticides, fungicides, mine tailings, and urban waste, and may cause serious damage to the environment and human health. Thus, adsorption studies are essential in assessing the behavior of heavy metals in the soil. The objective of this study was to evaluate the influence of soil chemical, particle size, and mineralogical properties on adsorption of cadmium (Cd), evaluated by Langmuir and Freundlich models, in Latossolos (Oxisols) with or without human activity. Soil samples were collected from the surface layer, 0.00-0.20 m, and chemical, particle size, and mineralogical analyzes were performed. In the adsorption study, concentrations of 0, 5, 25, 50, 100, 200, 300, and 400 mu g L-1 of Cd were used in the form of Cd(NO3)(2). The empirical mathematical models of Langmuir and Freundlich were used for construction of adsorption isotherms. Data were analyzed by means of multivariate statistical techniques, Cluster Analysis and Principal Component Analysis. The data from the adsorption experiment showed a good fit to the Langmuir and Freundlich models. Soils with a lower goethite/hematite ratio and greater cation exchange capacity and pH, showed higher maximum adsorption capacity of Cd.

Utilização de turfa para remoção de metais potencialmente tóxicos de uma empresa recicladora de plásticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Emprego de carvão ativado e resinas de troca ionica na remoção de substâncias orgânicas contaminantes do alcool etílico

This work had with objective to characterize and evaluate the performance of the combined system, involving activated charcoal and ionic exchange resins in the removal of substances organic contaminating of the ethyl alcohol from the fermentation of the cassava starch. To testing was used ethyl alcohol PA 96 oGL, conductivity of 0.90 μS/cm at 25 oC, acidity of 60 mg/L and Barbet test of 43 minutes at 15 oC. The contaminated alcohol was composed of ethyl alcohol additive of higher alcohols, organic acids, ester, diol, aldehydes, ketone and ether. Contaminated alcohol was added 2% activated charcoal and after the adsorption isotherm in ionic exchange resins was tested. The adsorption with activated charcoal was performed in a Water Bath at 30 oC for one hour and a half and shaking. Already adsorption ionic exchange columns occurred at room temperature on columns of 93,4 cm in filling height and diameter of 2.29 cm, for flows of 180 mL/min and 90 mL/min. Samples were collected in the tests with charcoal and with each one of the resins and the following analyses were performed: conductivity, acidity and Barbet test. The medium values for conductivity, acidity and Barbet test after the adsorption in charcoal and cation and anion resins were respectively: conductivity was 240; 354 and 465 μS/cm to 25 oC; acidity of 1.081; 1.103 and 1.062 mg/L and the Barbet test was 21; 20 and 9 minutes to 15 oC. It was observed that the addition of 2% of activated charcoal and the permanence in the columns of adsorption was not sufficient to remove the organic substances contaminating of the ethyl alcohol.

Estudo da utilização de serragem de madeira como adsorvente para o tratamento de efluentes têxteis

The Brazilian textile industry has been a highlight in the global economy. Connected with this high economic performance there is the water consumption and the generation of great volumes of wastewater which present high concentrations of dyes and chemical substances. One of the main techniques used in the treatment of textile effluents is adsorption, which has the activated carbon as the main adsorbent. Recently, studies have been developed to find alternative materials to activated carbon and exhibiting good adsorption capacity of dyes. The aim of this work is to study the potential of sawdust as adsorbent of low cost to remove the dye Direct Green 26. The results of this type of dye removal were obtained through the study of adsorption isotherms obtained by spectrophotometry in the UV-visible region analyzed by the Langmuir model. Finally, a comparison was made of these results with those of other adsorbents. Results showed that the average removal of dye, using sawdust, was 78.8% for an initial concentration of 500mg / L and the maximum adsorption capacity of 119mg / g. These results demonstrate the great potential of sawdust as an adsorbent for the dye Direct Green 26.

Aplicação de sílica mesoporosa modificada com moléculas contendo bases de Lewis na pré-concentração de Cd(II) em amostras aquosas

Em razão ao uso intensivo e por ser altamente não-degradável, o metal Cd (II) tem causado uma grande preocupação na sociedade moderna devido a sua capacidade de acumular-se em matrizes ambientais manifestando toxicidade. O projeto teve como objetivo o desenvolvimento da síntese da Sílica Mesoporosa para o ancoramento do ligante Ácido Rubeânico sobre a superfície do material. A caracterização do mesmo, por espectroscopia na região do infravermelho (FTIR), após a etapa de funcionalização indicou a presença de grupamento amina, com banda em 3350 cm-1, bandas na região de 2940 e 2850 cm-1 atribuídas a grupos metileno e a atenuação da banda C-Cl (700 cm-1), devido ao ancoramento da molécula do ligante. O material foi aplicado em experimentos de batelada e o efeito de tempo de contato e do pH sobre a adsorção de íons Cd (II) foi avaliado. O material apresentou cinética rápida, a qual foi alcançada em 1 minuto e a maior adsorção foi atingida em pH 6 (próximo ao ponto de carga zero) para ambos os metais. As condições ótimas obtidas foram aplicadas para a determinação da capacidade máxima de adsorção. Os dados obtidos da isoterma de adsorção foram aplicados à Equação Linearizada de Langmuir, fornecendo 0,03 mmol g-1, com o coeficiente de determinação dos dados sendo R² de 0,9961. Na segunda etapa, o material modificado foi aplicado em sistema de fluxo contínuo, ajustando as melhores condições como massa de amostra, tipos de eluente bem como o volume de eluato. Os resultados das concentrações do metal foram obtidos por determinação direta por espectrometria de absorção atômica