Gestão e avaliação educacional na escola de educação básica

This research has been conducted with the objective of identifying the similarities and the differences between the school management system proposed by the government and the school management system applied on a daily basis by the school management team. This management team is composed by the school principal, the coordinator teacher, and the educational supervisor of a school in the inner state of Sao Paulo. Data is being collected researching the references already existed about the school management system, documents and files of the school, and by an interview with the management team. It is expected that this research will identify the close and the distant aspects between the evaluation of the management team about itself and the evaluation conducted by the school in the process of educational evaluations. The data obtained through this research job is being analyzed considering its quality aspects.

Amorphous silicon carbonitride films modified by plasma immersion ion implantation

Amorphous silicon carbonitride (a-SiCN:H) films were deposited from hexamethyldisilazane (HMDSN) organic compounds via radio-frequency (RF) glow discharges. Afterwards the films were bombarded, from 15 to 60 min, with nitrogen ions using Plasma Immersion Ion Implantation (PIII) technique. X-ray photoelectron spectroscopy (XPS) showed that O-containing groups increased, while C-C and/or C-H groups decreased with treatment time. This result indicates chemical alterations of the polymeric films with the introduction of polar groups on the surface, which changes the surface wettability. In fact, the hydrophobic nature of a-SiCN:H films (contact angle of 100 degrees) was changed by nitrogen ion implantation and, and after aging in atmosphere air, all samples preserved the hydrophilic character (contact angle <80 degrees) independently of treatment time. The exposure of the films to oxygen plasma was performed to evaluate the etching rate, which dropped from 24% to 6% while the implantation time increased from 15 to 60 min. This data suggests that Pill increased the film structure strength, probably due to crosslinking enhancement of polymeric chains. Therefore, the treatment with nitrogen ions via Pill process was effective to modify the wettability and oxidation resistance of a-SiCN:H films. (C) 2014 Elsevier Ltd. All rights reserved.

Impactos de atividades de exploração de petróleo e gás natural sobre a comunicação acústica de Mysticeti (ordem Cetacea): uma revisão

Acoustic communication is essential in mammals and has three main functions: acquisition of information about the environment, intraspecific communication and detection of predators and prey. Studies indicate that the introduction of sounds produced by anthropogenic activities such as military exercises, use of sonar and activities related to the extraction of oil and natural gas can cause interference in cetacean communication. Recently, the discovery of pre-salt tends to increase these activities. After a decade since the launch date of IBAMA`s licensing and before the imminent increase in exploration activities in Brazil, it is essential to conduct studies to monitor closely the impact of this type of activity on the marine ecosystem. Thus, this study aims to identify potential impacts that the process of oil and natural gas exploration and production might have on the communication of baleen whales. Data from literature on bioacoustics and ecology of these animals were linked with technical-scientific data regarding this type of activity. 310 documents related to the topic were analyzed. Among them only 81 documents are of academic origin, and the others mostly action plans and reports from government agencies. 80% of the documents do not have any species as a focus, and in the remaining 20%, 17% were focused on the Greenland Whale (Balaena mysticetus) and 22% on the gray whale (Eschrichtius robustus). The main impacts identified in this study were the increased frequency and amplitude of vocalization, reduction or cessation of more elaborate songs and masking problems

Estudo e modelagem 3D de uma turbina Francis

Most of the hydraulic turbines that are running in the world are the Francis type, because they are able to fit a wide range of head and flow. We also can declare that most of the installed hydraulic energy up to this date is generated by this type of turbine. On the other hand, if we pay attention to mechanical details of a Francis turbine we will see that among the three most used types it is the one that presents the more complex design. And, the simplest one is the Pelton type, whereas the Kaplan is the one less utilized. This work aims to develop the hydrodynamic calculation of a Francis turbine as well as to obtain its assembly drawing and 3D modeling drawing. In this way all details must be shown therefore needing a complete knowledge about this issue. Both 2D and 3D drawings help much if one wants the machine to be running in its power house. It is well noted that most of the entities that design and manufacture the Francis turbines are not brazilian. In this way the more we study how to design this kind of machine the more is our contribution to our country in order to conquer technology and manufacture Francis turbines

Sujeitos diaspóricos e negociações identitárias: o entre-lugar em Brazil-Maru e Sonhos Bloqueados

Pós-graduação em Letras - FCLAS

Organic farm does not improve neither soil, or water quality in rural watersheds from southeastern Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analysis on the formation of a FRC by flux measurements and MHD simulations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transfer of a cold atmospheric pressure plasma jet through a long flexible plastic tube

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inactivation of candida albicans by cold atmospheric pressure plasma jet

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Acute and subchronic antihyperglycemic activities of bowdichia virgilioides roots in non diabetic and diabetic rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Changes in the oxidative stress biomarkers in liver of streptozotocin-diabetic rats treated with combretum lanceolatum flowers extract

Aims: The study investigated the in vivo antioxidant activity and the in vitro radical scavenging capacity of the Combretum lanceolatum Pohl (Combretaceae) flowers ethanolic extract (ClEtOH) in streptozotocin-diabetic rats. Place and Duration of Study: Department of Chemistry, Federal University of Mato Grosso, Cuiabá, Brazil; between February 2012 and December 2012. Methodology: Male Wistar rats were divided into four groups: Normal rats treated with water/vehicle (N); diabetic rats treated with water (DC); diabetic rats treated with 250 mg/kg (DT250) or with 500mg/kg (DT500) of ClEtOH. After 21 days of treatment, liver samples were used for the analysis of the oxidative stress biomarkers and activity of antioxidant enzymes. In vitro radical scavenger capacity was investigated by the following methods: DPPH radical scavenging, ABTS radical cation decolorization and crocin bleaching assays. Results: Significant oxidative stress was observed in liver of DC, since the malondialdehyde (MDA, biomarker of lipoperoxidation) levels were increased in comparison with N. Increased activities of the antioxidant enzymes superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) were also observed in DC, which could represent a compensatory mechanism against oxidative stress. Glutathione (GSH) levels were lower and similar between N and DC. The MDA levels were significantly decreased in liver of rats from DT250 and DT500, reaching levels similar those of N, suggesting that ClEtOH prevented lipoperoxidation. The treatment of diabetic rats with ClEtOH also increased the GSH levels, as well as increased the GSH-Px activity, and did not change the SOD activity. The results of in vitro radical scavenging capacity indicated that ClEtOH is highly active. Conclusion: These findings indicate that ClEtOH has antioxidant properties in liver of diabetic rats, decreasing lipoperoxidation and increasing the endogenous antioxidant responses. Both the antihyperglycemic effect and the capacity to scavenge free radicals may be related to the antioxidant activity of ClEtOH in diabetes.

Potencial de ocorrência de avarias ambientais em bacias hidrográficas com ocupação rural mediante análise morfométrica

The understanding of the geo-morphological characteristics allows the identification of flood areas and instability slopes among others important features for land use planning. The study of the hydrological net and the analysis of morphometric parameters help in the geomorphologic characterization, providing specific physics indicators that quantify the risks for environmental damages. The present work used Geographic Information Systems (GIS) and carried out the morphometric analysis of two watersheds in the Alto Rio Sorocaba, municipality of Ibiuna (SP). Using digitalized topographic bases in the scale 1:50,000, the main morphometric parameters were extracted and the Digital Elevation Model (DEM) was obtained. Hence the slope, ground illumination, hill orientation and relief feature maps were elaborated. The characteristics for the two watersheds were quite similar, both have low risks for floods and landslides. Therefore, the concave feature is the predominant hill shape for both watersheds. The morphometric parameters directly related to the river density of the watersheds showed some differences, because the Sorocabuçú watershed presents higher value, resulting in a higher level of relief development. Thus, with this characterization it is possible to provide subsidies for environmental planning actions to the area.

Avaliação do software Autodesk Revit 2016 para quantificação por meio da modelagem da informação da construção

The building budgeting quickly and accurately is a challenge faced by the companies in the sector. The cost estimation process is performed from the quantity takeoff and this process of quantification, historically, through the analysis of the project, scope of work and project information contained in 2D design, text files and spreadsheets. This method, in many cases, present itself flawed, influencing the making management decisions, once it is closely coupled to time and cost management. In this scenario, this work intends to make a critical analysis of conventional process of quantity takeoff, from the quantification through 2D designs, and with the use of the software Autodesk Revit 2016, which uses the concepts of building information modeling for automated quantity takeoff of 3D model construction. It is noted that the 3D modeling process should be aligned with the goals of budgeting. The use of BIM technology programs provides several benefits compared to traditional quantity takeoff process, representing gains in productivity, transparency and assertiveness