Nanohardness and contact angle of Si wafers implanted with N and C and Al alloy with N by plasma ion implantation

Surfaces of silicon wafers implanted with N and C, respectively, and aluminum 5052 implanted with N alone by plasma immersion ion implantation WHO were probed by a nanoindentor and analyzed by the contact-angle method to provide information on surface nanohardness and wettability. Silicon nitride and silicon carbide are important ceramic materials for microelectronics, especially for high-temperature applications. These compounds can be synthesized by high-dose ion implantation. The nanohardness of a silicon sample implanted with 12-keV nitrogen PIII (with 3 X 10(17) cm(-2) dose) increased by 10% compared to the unimplanted sample, in layers deeper than the regions where the formation of the Si,N, compound occurred. A factor of 2.5 increase in hardness was obtained for C-implanted Si wafer at 35 keV (with 6 X 10(17) cm(-2) dose), again deeper than the SiC-rich layer, Both compounds are in the amorphous state and their hardness is much lower than that of the crystalline compounds, which require an annealing process after ion implantation. In the same targets, the contact angle increased by 65% and 35% for N- and C-implanted samples, respectively. Compared to the Si target, the nitrogen PIII-irradiated Al 5052 (wish 15 keV) showed negligible change in its hydrophobic character after ion implantation. Its near-surface nanohardness measurement showed a slight increase for doses of 1 X 10(17) cm(-2). We have been searching for an AlN layer of the order of 1000 A thick, using such a low-energy PIII process, but oxide formation during processing has precluded its synthesis. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Análise do efeito higrotérmico no comportamento em fadiga de compósitos de PPS/fibras de carbono

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface Modification of Polycarbonate by Atmospheric-Pressure Plasma Jets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cutting forces in turning of gray cast iron using silicon nitride based cutting tool

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Novel active and passive anti-vibration mountings

This paper investigates a novel design approach for a vibration isolator for use in space structures. The approach used can particularly be applicable for aerospace structures that support high precision instrumentation such as satellite payloads. The isolator is a space-frame structure that is folded in on itself to act as a mechanical filter over a defined frequency range. The absence of viscoelastic elements in such a mounting makes the design suitable for use in a vacuum and in high temperature or harsh environments with no risk of drift in alignment of the structure. The design uses a genetic algorithm based geometric optimisation routine to maximise passive vibration isolation, and this is hybridised with a geometric feasibility search. To complement the passive isolation system, an active system is incorporated in the design to add damping. Experimental work to validate the feasibility of the approach is also presented, with the active/passive structure achieving transmissibility of about 19 dB over a range of 1-250 Hz. It is shown here that the use of these novel anti-vibration mountings has no or little consequent weight and cost penalties whilst maintaining their effectiveness with the vibration levels. The approach should pave the way for the design of anti-vibration mountings that can be used between most pieces of equipment and their supporting structure. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.

Crystallization kinetics in phosphate sodium-based glass studied by DSC technique

In this work, differential scanning calorimetry (DSC) was used to study the mechanism of crystallization of 5OP(2)O(5-)27.8Na(2)O-16ZnO-6.2Al(2)O(3) glass. DSC measurements were performed on bulk and powdered glasses with different particle size. The curve for bulk glass shows one crystallization peak while powdered glasses presented two distinct crystallization peaks. Based on DSC studies, the activation energies obtained were 336 +/- 6 and 213 +/- 3 U mol(-1), associated with first and second crystallization peaks, respectively. Analyzing the DSC parameters as a function of particle size, the Avrami n parameter suggests that the peak at low temperature may be associated with surface crystallization while the peak at high temperature is associated with bulk crystallization. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Thermoluminescence of aluminophosphate glasses in the metaphosphate composition

Potassium aluminum phosphate (KAP) glasses in the system xKPO(3)-(100-x)AI(PO3)3 with x = 10, 30 and 50 mol% were prepared in the metaphosphate composition. The glasses were doped with MnO2 and their thermoluminescent (TL) response was investigated. Raman spectra showed that these glasses did not undergo structural changes with the substitution of manganese ions. The glass composition x = 50 mol% doped with 1.0 mol% of MnO2 presented the best TL response. The material displayed good sensitivity for gamma-rays, X-rays and UV light. The emission curves exhibited two TL peaks, one at a low temperature (similar to 150 degrees C) and the other at a high temperature (similar to 365 degrees C), whose positions were dependent on the type of exciting radiation applied. The results of the present study indicated that the high temperature peak is a good candidate for TL dosimetric investigations. (c) 2006 Elsevier B.V. All rights reserved.

Dielectric and impedance properties of Nd3/2Bi3/2Fe5O12 ceramics

The polycrystalline sample of Nd3/2Bi3/2Fe5O12 was prepared by a high- temperature solid-state reaction technique. Preliminary X-ray structural analysis exhibits the formation of a single-phase tetragonal structure at room temperature. Microstructural analysis by scanning electron microscopy shows that the sintered sample has well defined grains. These grains are distributed uniformly throughout the surface of the sample. Detailed studies of dielectric response at various frequencies and temperatures exhibit a dielectric anomaly at 400 A degrees C. The electrical properties (impedance, modulus and conductivity) of the material were studied using a complex impedance spectroscopy technique. These studies reveal a significant contribution of grain and grain boundary effects in the material. The frequency dependent plots of modulus and the impedance loss show that the conductivity relaxation is of non-Debye type. Studies of electrical conductivity with temperature demonstrate that the compound exhibits Arrhenius-type of electrical conductivity. Study of ac conductivity with frequency suggests that the material obeys Jonscher's universal power law.

IMPEDANCE CHARACTERISTICS of La3/2Bi3/2Fe5O12 CERAMICS

Polycrystalline La3/2Bi3/2Fe5O12 (LBIO) compound was prepared by a high-temperature solid-state reaction technique. The complex impedance of LBIO was measured over a wide temperature (i.e., room temperature to 500 C) and frequencies (i.e., 10(2)-10(6) Hz) ranges. This study takes advantage of plotting ac data simultaneously in the form of impedance and modulus spectroscopic plots and obey non-Debye type of relaxation process. The Nyquist's plot showed the presence of grain effects in the material at high temperature. The ac conductivity spectrum was found to obey Jonscher's universal power law. The dc conductivity was found to increase with rise in temperature. The activation energy of the compound was found to be 0.24 and 0.51 eV in the low and high-temperature region, respectively, for conduction process.

Comportamento de sementes de cultivares de soja, submetidos a diferentes períodos de envelhecimento acelerado

Accelerated aging test is an important procedure to be used, beyond other aim, for breeding programs to select cultivars with storage and development potential under high relative humidity and temperature. At accelerated aging test in soybean seeds, the temperature and time of exhibition they were not still totally established, factors that cause divergence among the researchers, mainly with relationship to the most appropriate periods. The aim was to evaluate the behavior of soybean seeds submitted to accelerated aging test. Seeds of the varieties IAC-15, CAC-1, FT-Estrela and IAC-Foscarin 31 were submitted to germination test, electrical conductivity and accelerated aging (41 degrees C, during 44, 48, 52, 56, 60, 64, 68, 72 and 76 hours). There are differences among cultivars evaluated in relation to accelerated aging test sensibilility; the cultivars are sensibles to increasing the exposition time; the accelerated aging test can be used to select cultivars in breeding programs; the cultivar FT-Estrela can be sowed at regions with high temperature and humidity.

Avaliação nutricional, em tilápias-do-nilo, de farinhas de sangue bovino obtidas por três métodos de processamento

Avaliaram-se farinhas de sangue obtidas pelos métodos de processamento em tambor, convencional e atomização. As farinhas foram submetidas ao processo de extração e fracionamento da proteína para determinação do perfil do tamanho molecular, que foi comparado ao do sangue bovino in natura. Nas amostras, submetidas ou não ao processo de desengorduramento, foram realizadas análises da digestibilidade in vitro da proteína. Para determinação dos coeficientes de digestibilidade dos nutrientes in vivo, foram confeccionadas quatros rações, sendo uma sem farinha de sangue, denominada ração-referência purificada. Para essa etapa, juvenis de tilápia-do-nilo com peso médio inicial de 100,0±5,0 g foram estocados em aquários de 250 L, em delineamento de blocos casualizados, com quatro repetições e dez peixes/unidade experimental. As rações-teste foram obtidas com a introdução de 30% das farinhas de sangue em estudo. O processamento afetou a estrutura proteica original do sangue in natura em condições de alta temperatura e tempo prolongado, efeito traduzido pela alta proporção de peptídeos de baixo peso molecular e aminoácidos livres, correspondendo a baixos valores de digestibilidade da proteína da farinha de sangue nos testes in vivo e in vitro. A farinha de sangue atomizada e a de tambor são eficientemente utilizadas por tilápias-do-nilo. Na farinha de sangue convencional, a proteína teve valor biológico inferior ao das outras duas farinhas. Na formulação de rações contendo farinha de sangue para tilápias-do-nilo, a isoleucina deve ser considerada o primeiro aminoácido limitante, seguida pela metionina+cistina, arginina e treonina, que foram encontradas em níveis críticos para essa espécie, principalmente na farinha de sangue convencional.

The effect of season on serum testosterone concentrations in dogs

Photoperiod and environmental temperature are two important factors that may influence the reproductive cycle of various species. The objective of this study was to investigate seasonal influences on serum testosterone concentrations in dogs in a tropical zone, where the variation in day length between winter and summer solstice was approximately 2.5 h. Blood samples were collected every 15 days from seven adult dogs over a 14-month interval and serum testosterone concentrations were determined by radioimmunoassay. The year was divided into four seasons and mean testosterone concentrations for each season were related to the mean environmental temperature and rainfall during that season. Mean testosterone concentrations were 1.81 ng/mL (winter 2002), 1.93 ng/mL (spring 2002),1.31 ng/mL (summer 2003), 2.02 ng/mL (autumn 2003) and 1.93 ng/mL (winter 2003). The temperature ranged from 10.2 to 32.8 degrees C and the rainfall from 33 to 476 mm. Serum testosterone concentrations were lower in summer 2003 than in both spring 2002 (P = 0.05) and autumn 2003 (P = 0.0 16). In a tropical zone, a combination of high temperature and substantial rainfall may have reduced serum testosterone concentrations in dogs. (c) 2006 Elsevier B.V. All rights reserved.

Delayed replantation of rat teeth after use of reconstituted powdered milk as a storage medium

Minimal extraoral dry storage period and moist storage for the avulsed tooth are identified as key steps for the treatment protocol of tooth replantation. Among the possible moist storage media, bovine milk has stood out because of its capacity of preserving the integrity of the periodontal ligament (PDL) fibers. This condition has attracted the attention to investigate the use of powdered milk, which is one of the presentation forms of bovine milk, as a feasible storage medium in cases of delayed tooth replantation. The aim of this study was to evaluate the healing process after delayed replantation of rat teeth stored in reconstituted powdered milk and long shelf-life (ultra high temperature) whole milk. Forty maxillary right rat incisors were assigned to four groups (n = 10): group I - the teeth were extracted and immediately replanted into theirs sockets; group II - the teeth were stored for 60 min in 200 ml of freshly reconstituted powdered milk; group III - the teeth were stored for 60 min in 200 ml of long shelf-life whole milk; group IV - the teeth were kept dry for the same time. All procedures were performed at room temperature. Next, the root canals of teeth in groups II, III, and IV were instrumented, filled with a calcium hydroxide-based paste, and replanted into their sockets. All animals received systemic antibiotic therapy and were killed by anesthetic overdose 60 days after replantation. The pieces containing the replanted teeth were removed, fixed, decalcified, and paraffin-embedded. Semi-serial 6-mu m-thick sections were obtained and stained with hematoxylin and eosin for histomorphological analysis. There was statistically significant difference (P < 0.05) between groups I and IV regarding the presence of replacement resorption and PDL remnants on root surface. The powdered milk and long shelf-life whole milk presented similar results to each other and may be indicated as storage media for avulsed teeth.

Effect of microwave disinfection on the bond strength of denture teeth to acrylic resins

During microwave disinfection, the dentures are exposed to water at high temperature and this may affect the bond between the denture teeth and the acrylic resin from which dentures are made. In this study, a shear test was used to evaluate the effect of microwave disinfection (650W/6 min) on the bond strength of two types of denture teeth to three acrylic resins, with different polymerization methods. The specimens were submitted to the shear tests (0.5 mm/min) after: immersion in water (37 degrees C) for 48 h or 8 days (controls); two or seven cycles of microwave disinfection (test groups). Data (MPa) were analyzed using three-way ANOVA and Tukey HSD test (alpha = 0.05). Microwave disinfection did not adversely affect the bond strength of all tested materials with the exception of QC-20 bonded to SR Vivodent PE, for which a significant reduction was recorded after seven cycles of irradiation. (C) 2007 Elsevier Ltd. All rights reserved.

Seasonal effect of three pasture plants species on the free-living stages of Haemonchus contortus

Avaliaram-se o desenvolvimento e a sobrevivência dos estágios de vida livre de Haemonchus contortus em fezes obtidas de ovinos infectados por esse nematódeo, depositadas nas quatro estações do ano, em pastagens de três espécies de gramíneas (Brachiaria decumbens cv Australiana, Cynodon dactylon cv. Coast-cross e Panicum maximum cv. Aruana), com duas alturas (5cm e 30cm) no momento da deposição das fezes. Amostras de fezes e de capim foram coletadas uma, duas, quatro, oito, 12 e 16 semanas após a deposição das fezes e processadas em laboratório, para recuperação de larvas infectantes. O maior número de larvas infectantes foi recuperado das amostras de capim e de fezes nas pastagens com 30cm de altura. As condições climáticas que mais favoreceram o desenvolvimento e a sobrevivência das larvas nas fezes, bem como a sobrevivência e a manutenção das larvas no capim foram aquelas com temperaturas médias em torno de 17ºC, acompanhadas de baixas precipitações pluviométricas. As temperaturas mais altas e as precipitações elevadas, que ocorrem na chamada estação das águas, foram desfavoráveis para a recuperação de larvas infectantes da pastagem. de forma geral, a pastagem de Aruana foi a que possibilitou as maiores recuperações de larvas.