Observações morfológicas no ducto epididimário do cão

O ducto epididimário, no cão, acha-se revestido por epitélio colunar pseudoestratificado, com população celular constituída por células principais, basais e apicais, presentes em todas as regiões. Este epitélio é circundado pelo estroma peritubular. O epitélio do segmento inicial epididimário possui a maior altura, que diminui progressivamente em direção à cauda epididimária. Ocorre um aumento progressivo do lúmen tubular através das diferentes regiões, sendo maior na região da cauda epididimária, configurando um local de estocagem de espermatozóides.

Estudo cefalométrico das alturas faciais anterior e posterior, em crianças brasileiras, portadoras de má oclusão Classe I de Angle, na fase de dentadura mista

Realizou-se um estudo das alturas faciais anterior e posterior em 79 crianças brasileiras, sendo 46 do gênero feminino e 33 do masculino, com idades de 8 a 11 anos, portadoras de má oclusão Classe I de Angle, na fase de dentadura mista, não submetidas a tratamento ortodôntico. Esta investigação utilizou duas radiografias cefalométricas em norma lateral, de cada criança, com intervalo de 8 a 16 meses entre uma radiografia e outra, para comparação dos dados cefalométricos. Foram estudadas as proporções faciais anteriores, ou seja, a relação entre as dimensões N-Me (AFT), N-ENA (AFS), ENA-Me (AFI) e o relacionamento entre as dimensões Ar-GO (AFP) e a distância entre o plano palatino ao mento (AFA) , isto é, o Índice da Altura Facial (IAF). Os resultados obtidos, possibilitaram constatar que as tendências de crescimento foram equilibradas em todas as situações estudadas; a dimensão altura facial inferior, contribuiu de forma mais significativa, nas alterações observadas na altura facial total; as proporções faciais anteriores se mantiveram em torno de 42% para a altura facial superior e 58% para a altura facial inferior; o índice da altura facial ou se manteve constante em torno de 0,66 ou apresentou uma tendência a aumentar com a idade; não ocorreu dimorfismo sexual com relação às proporções faciais e índice da altura facial.

Composição química do capim-elefante cv. Roxo cortado em diferentes alturas

O objetivo deste trabalho foi verificar o efeito dos cortes efetuados a 0, 15, 30 e 45 cm sobre a composição química do capim-elefante (Pennisetum purpureum, Schum.) cv. Roxo, em épocas seca e chuvosa. As amostras foram obtidas de uma área útil de 8,4 m² de cada parcela. Após o corte de uniformização, efetuaram-se dois cortes no período seco, em intervalos de 90 dias, e três no período chuvoso, em intervalos de 60 dias. de cada parcela foi tomada uma amostra de 3 a 5 perfilhos, desidratada em estufa e triturada para analises laboratoriais. Foram avaliados os percentuais de matéria seca (MS), proteína bruta (PB), fibra em detergente neutro (FDN), fibra em detergente ácido (FDA), celulose (CEL), hemicelulose (HCEL), lignina (LIG) e cinzas. As alturas de corte não influenciaram a composição química da forrageira, nem houve interação com as épocas. Com exceção de hemicelulose e cinzas, os cortes na época seca mostraram resultados superiores à chuvosa. As médias nas duas épocas foram 19,70 e 17,44% para MS; 7,74 e 7,25% para PB; 76,41 e 71,13% para FDN; 42,75 e 41,02% para FDA; 31,44 e 30,43% para CEL; 30,66 e 30,28% para HCEL; 9,25 e 7,83% para LIG; e 1,97 e 3,38% para cinzas, nos períodos seco e chuvoso, respectivamente.

Perfilhamento e algumas características morfológicas do capim-elefante cv. Roxo sob quatro alturas de corte em duas épocas do ano

O objetivo deste trabalho foi verificar o efeito dos cortes efetuados a 0, 15, 30 e 45 cm sobre algumas características morfofisiológicas do Pennisetum purpureum, Schum. cv. Roxo nas épocas seca e chuvosa no Brejo Paraibano. As amostras foram obtidas de uma área útil de 8,4 m² de cada parcela. Após o corte de uniformização, efetuaram-se dois cortes no período seco, em intervalos de 90 dias, e três no período chuvoso, em intervalos de 60 dias. Foram avaliados os seguintes parâmetros: perfilhamento, altura das plantas, porcentagens de folhas e colmos e relação folha/colmo (RF/C). Aos 25 dias após cada corte, foram feitas as contagens dos perfilhos existentes nas parcelas. de cada parcela tomou-se uma amostra de 3 a 5 perfilhos, seca em estufa, e separaram-se as frações de folhas e colmos. Houve interação dos fatores (altura x época do corte) quanto ao número de perfilhos por m² e à RF/C. No período chuvoso, houve mais perfilhos basais que no período seco, e o número de perfilhos aéreo foi superior em todos os cortes acima do nível do solo. A RF/C foi superior na época chuvosa nas alturas de 30 e 45 cm do solo. Cortes mais altos apresentaram maior proporção de folhas e menor proporção de colmos. Os percentuais de folhas na época chuvosa foram maiores que os da época seca.

Aspectos produtivos do capim-elefante (Pennisetum purpureum, Schum.) cv. Roxo no brejo paraibano

O trabalho foi realizado com o objetivo de verificar o efeito de diferentes alturas de corte sobre a produtividade do capim-elefante cv. Roxo em épocas de seca e chuva no Brejo paraibano. O esquema experimental foi um fatorial 4 x 2, sendo quatro alturas de corte (0, 15, 30 e 45 cm), duas épocas (períodos seco e chuvoso) e quatro blocos. Foram avaliadas as produções por hectare de massa verde (MV), matéria seca total (MS), de folhas (MSF) e colmos (MSC) e proteína bruta (PB). Após o corte de uniformização, efetuaram-se dois cortes no período seco em intervalos de 90 dias e três no período chuvoso em intervalos de 60 dias. Não houve interação entre altura de corte e a época. Entretanto, à medida que se elevou a altura do corte, reduziram-se as produções de MV, MS e MSC. As produções de PB e MSF não diferiram. Quando elevadas as alturas dos cortes de 0 para 45 cm, houve redução de aproximadamente 33% na produção para MV, 24,83% para MSF e 60% para MSC. Os cortes no período seco foram mais produtivos em relação aos da época chuvosa. As médias das produções de MS, MV, MSF, MSC e PB foram, respectivamente, 4,12; 21,19; 2,65; 1,47 e 0,32 t/ha no período seco e 12,44; 2,45; 1,81; 0,54 e 0,17 t/ha no período chuvoso.

Tillering dynamics in Guinea grass pastures subjected to management strategies under rotational grazing

This study was carried out to analyze the tillering profile of Guinea grass (Panicum maximum cv. Tanzania) pastures subjected to two grazing frequencies (time necessary to intercept 90 and 95% of the incoming light) and two post-grazing heights (30 and 50 cm) in the period from November 2005 to October 2006. The experimental design was of completely randomized blocks with three replications, in a 2 × 2 factorial arrangement. At the end of the spring, pastures managed with 90% light interception showed greater tiller appearance rates in relation to pastures managed with 95%, regardless of post-grazing height. In the summer and fall, pastures managed with post-grazing height of 30 cm showed higher tiller appearance rates in comparison with pastures managed at 50 cm, regardless of grazing frequency. Concerning the tiller mortality rates, in the summer, higher values were found for pastures managed at 90/50 and 95/30 (interception/height), intermediate values at 90/30 and lower values in those managed at 95/50. Pastures managed at 90/30, 95/30 and 95/50 in the fall presented greater tiller mortality rates than those managed at 90/50. These differences do not occur in the winter/beginning of spring. The stability index remained above 1 all through the experimental period. All management strategies evaluated are adequate for Guinea grass.

NATURAL PRODUCT SUBSTITUTION PATTERN AND SKELETAL RECOGNITION METHOD

This work describes a methodology for identification of skeletal types of diterpenes based on data base with 1500 compounds isolated from Asteraceae. One program named BOTOCSYS was built with the codification of the compounds and their botanical sources. An example of identification of a new substance is given.

Sea waves generated by extratropical cyclones in the South Atlantic Ocean: Hindcast and validation against altimeter data

This work presents analyses of the atmospheric conditions and the hindcast of the surface wave field when six extratropical cyclones formed and displaced over the South Atlantic Ocean (10degreesN, 60degreesS; 75degreesW, 15degreesE) between April and September 1999. These events caused high sea waves associated with hazardous conditions along the south and southeast coast of Brazil. The meteorological composite fields for these cyclones show a strong near-surface wind velocity (up to 14 m s(-1)) during its mature phase. The sea-state wave hindcast was obtained using a third-generation wave model forced by the 10-m above ground level wind field from the National Centers for Environmental Prediction-National Center for Atmospheric Research reanalysis dataset. Closer to the south and southeast Brazilian coast, the hindcast results showed significant wave heights of up to 5 m in some of the events. The wave hindcast results for the significant wave height were compared against satellite altimeter data at 6 h intervals. The statistical index showed a systematic underestimation of the significant wave height by 0.5 m. The correlation between wave hindcast and altimeter measurements was greater than 90%, showing a good phase reproduction by the wave model.

Heat transfer in fixed bed: a model non-linearity approach

Studies have been carried out on the heat transfer in a packed bed of glass beads percolated by air at moderate flow rates. Rigorous statistic analysis of the experimental data was carried out and the traditional two parameter model was used to represent them. The parameters estimated were the effective radial thermal conductivity, k, and the wall coefficient, h, through the least squares method. The results were evaluated as to the boundary bed inlet temperature, T-o, number of terms of the solution series and number of experimental points used in the estimate. Results indicated that a small difference in T-o was sufficient to promote great modifications in the estimated parameters and in the statistical properties of the model. The use of replicas at points of high parametric information of the model improved the results, although analysis of the residuals has resulted in the rejection of this alternative. In order to evaluate cion-linearity of the model, Bates and Watts (1988) curvature measurements and the Box (1971) biases of the coefficients were calculated. The intrinsic curvatures of the model (IN) tend to be concentrated at low bed heights and those due to parameter effects (PE) are spread all over the bed. The Box biases indicated both parameters as responsible for the curvatures PE, h being somewhat more problematic. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Effect of foliar and substrate fertilization on lady palm seedling growth and development

Lady palm, [Rhapis excelsa (Thunberg) Henry ex. Rehder] is one of the most cultivated ornamental palms in the world, for use as a vase plant or in shaded landscapes. Because limited information exists on lady palm response to fertilizers, the objective of this study was to evaluate the effect of different types of fertilization and substrates on lady palm seedling growth and development. Three year old lady palms were planted in 8-L pots, filled with a mix of soil, manure, and sand 1:1:1 (v:v:v), placed under a 50% shade, and irrigated with microspray. Treatments were substrate fertilization with 500 g P(2)O(5) and 100 g K(2)O per m(3); fertilization with 1.8 kg of P(2)O(5) (simple superphosphate) per m3; 50 g of nitrogen (N), P(2)O(5), and K(2)O of a granulated fertilizer (10:10:10) per m(3), control (without fertilization), and a foliar fertilization in addition to these treatments using the commercial product Biofert (8:9:9). Treatments were replicated four times in a randomized block design. Each treatment plot consisted of four plants. Data were collected at 140, 170, 200, 230, 260, and 290 days after transplanting (DAT) for plant heights, stem diameter at substrate level, number of leaves, shoots, and canopy, roots fresh and dry matter samples were harvest at 290 days. Foliar fertilization resulted in significantly greater plant height in a 140, 120, 200, and 230 DAT and plant diameter on the 140, 260, and 290 DAT. There was interaction among factors for number of leaves with fertilization based on P(2)O(5) and K(2)O when leaf fertilizer was added that resulted in a greater number of leaves.

Desempenho do irrigâmetro no manejo da água de irrigação na cultura do feijoeiro

In this work, the aim was to evaluate the performance of Irrigameter in the management of the irrigation water, led in the culture of the bean plant, comparatively to the use of the methods standard of stove, tensiometers, Bouyoucos, automatic meteorological station and pan Class A. Irrigameter was adjusted to the soil characteristics, culture of the bean and irrigation equipment to confection the management ruler. For direct estimation of the evapotranspiration of the culture of the bean plant in your development stadiums, Irrigameter operated inside with heights of the levels of water of the evaporatorio same to 2, 3 and 5 cm, corresponding to the stadiums of initial development, vegetative development and flowering, respectively. The humidity obtained by the standard method of stove it was adopted as reference in the comparisons of the irrigation depth. Irrigameter can be used in the management of the irrigation to determine the consumption of water directly for a culture, in any development stadium; the methods that estimate the evapotranspiration of the culture overestimated the irrigation depth recommended by the standard method of stove, happening behavior contrary with the ones that determines the current humidity of the soil.

A Semi-Continuous Analyzer for the Fluorimetric Determination of Atmospheric Formaldehyde

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos do tipo de ração inicial sobre a morfologia intestinal e digestibiliade dos nutrientes em leitões

Thirty piglets, weaned at an average age of 28 days, were used in experiment one. After weaning, 24 animals were transferred to the nursery in groups of two to each pen and fed simple or semi-complex diets ad libitum. On weaning day (day 0), six pigs were slaughtered. On days 7 and 21 post-weaning, one animal from each nursery pen was slaughtered to study mucosal thickness (MTD and MTJ) and villi heights (VHD and VHJ) in the duodenum and jejunum. The average values observed for MTD, VHD, MTJ, and VHJ were not influenced by type of diet. MTD, MTJ, and VHJ increased from days 7 to 21 post-weaning. Polynomial regression spanning days 0, 7, and 21 showed a linear effect for MTJ and a quadratic effect for VHD and VHJ. In experiment two, 16 piglets weaned at an average age of 28 days were used in two metabolic trials carried out during two periods of the initial phase (days 5 to 14 and days 19 to 28 postweaning), to determine the nutritional value of simple and semi-complex diets. There were no differences among treatments in apparent digestibility of crude protein and dry matter and the values for digestible or metabolizable energy of the diets. It was concluded that composition of the starter diet did not influence the intestinal morphology of piglets, the digestibilities of dry matter and crude protein, or the digestible and metabolizable energy contents of the diets.

Mapeamento do contorno estrutural do embasamento da bacia sedimentar de Curitiba - PR

The sedimentary Curitiba basin is located in the Central-Southern part of the first Parananense plateau, and comprises Curitiba (PR), and part of the neighbour Municipalities (fig.1). It is supposed to be of Plio-Pleistocene age. It has a shallow sedimentary fulfillment, represented by the Guabirotuba formation (BIGARELLA and SALAMUNI, 1962) which is dristributed over a large area of about 3.000km2. The internal geometry, not entirely known yet, is actually object of detailed research, that shows its geological evolution to Cenozoic tectonic movements. For the purpose of this study the definition of the structural contour of the basement and their depo-centers is fundamental. This paper presents the results of the integration of surface and subsurface data, processed by statistical methods, which allowed a more precise definition of the morphostructural framework of the basement. For the analysis of the geological spacial data, specific softwares were used for statistical processing for trend surfaces analysis. The data used in this study are of following types: a) drilling logs for ground water; b) description of surface points of geological maps (CRPM, 1977); c) description of points of geotechnical drillings and down geological survey. The data of 223 drilling logs for ground water were selected out of 770 wells. The description files of 700 outcrops, as well as planialtimetric field data, were used for the localization of the basement outcrop. Thus, a matrix with five columns was set up: utm E-W (x) and utm N-S (y); surface altitude (z); altimetric cote of the contact between sedimentary rocks and the basement (k); isopachs (l). For the study of the basement limits, the analysis of surface trends of 2(nd) and 3(rd) degree polinomial for the altimetric data (figs. 2 and 3) were used. For the residuals the method of the inverse of the square of the distance (fig.4) was used. The adjustments and the explanations of the surfaces were made with the aid of multiple linear regressions. The analysis of 3rd degree polinomial trend surface (fig.3) confirmed that the basement tends to be more exposed towards NNW-SSE explaining better the data trend through an ellipse, which striking NE-SW and dipping SW axis coincides with the trough of the basin observed in the trending surface of the basement. The performed analysis and the respective images offer a good degree of certainty of the geometric model of the Curitiba Basin and of the morphostructure of its basement. The surface trend allows to sketch with a greater degree of confidence the structural contour of the topgraphic surface (figs. 5 and 6) and of the basement (figs. 7 and 8), as well as the delimitation of intermediate structural heights, which were responsible for isolated and assymmetric depocenters. These details are shown in the map of figures 9 and 10. Thus, the Curitiba Basin is made up by a structural trough stretching NE-SW, with maximum preserved depths of about 80m, which are separated by heights and depocenters striking NW-SE (fig. 11). These structural features seems to have been controlled by tectonic reactivation during the Tertiary (HASUI, 1990) and which younger dissection was conditioned by neotectonic processes (SALAMUNI and EBERT, 1994).

Padrões de distribuição de líquidos obtidos com bicos TF-VS4, TJ60-11006 e TQ15006 em mesa de prova

The performance of a spray boom can be evaluated from its individual nozzle distribution patterns determined in a patternator (test table), as discussed by Perecin et al. (1994). The distribution pattern of three nozzle types obtained in a patternator at six heights were compared in order to propose a formula for determining the variation coefficient. The simulation of a spray boom was conducted from individual nozzle distribution patterns, and obtained the random variation coefficients (RVC) and the systematic variation coefficients (SVC). The results showed good performance of the TF-SV4 nozzles, with CV smaller than 10%, for nozzle spacing as large as 50 cm. The TQ15006 nozzles showed high variability in the central region of the distribution pattern, resulting in high CV from nozzle spacings as narrow as 25 cm. The TJ60-11006 behaved as intermediate between TF-VS4 and TQ15006. The formula proposed for determining the variation coefficient is [(RVC) 2+(SVC) 2] 1/2.