Observation of Z decays to four leptons with the CMS detector at the LHC

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measurement of the relative prompt production rate of chi(c2) and chi(c1) in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Between-season attraction of cotton boll weevil, Anthonomus grandis Boh. (Coleoptera: Curculionidae) adults by its aggregation pheromone

O presente estudo teve como objetivo investigar a atratividade do bicudo do algodoeiro ao seu feromônio de agregação em período de inverno. Foram utilizados dois campos experimentais no município de Casa Branca, SP. em cada um destes, foram estabelecidas três áreas separadas de aproximadamente 500 metros, sempre próximas à vegetação de refúgio. Cada área foi dividida em três sub-áreas ou blocos de 100 m² para receber a aplicação do feromônio (2,5 g por bloco). Foi realizada uma contagem de bicudos adultos no solo antes, e mais cinco após a aplicação de feromônio. em cada bloco, foram observadas dez parcelas aleatórias, para a avaliação dos bicudos. Os adultos de A. grandis foram atraídos imediatamente após a aplicação do feromônio, sendo capturados por mais de 14 dias após. O índice mais elevado de atração foi observado 24 horas após a aplicação. A utilização do feromônio de agregação durante o inverno, pode aumentar a ação reguladora exercida pelos inimigos naturais, devido ao aumento de disponibilidade de presas. Controle químico pode ser recomendado 24 horas após a aplicação de feromônio em pequenas parcelas, como uma estratégia para a supressão de adultos de Anthonomus grandis em período de entressafra.

Cytotoxicity of denture base acrylic resins: A literature review

Acrylic resins are widely used in the fabrication of denture bases and have been shown to be cytotoxic as a result of substances that leach from the resin. The primary eluate is residual monomer. Numerous reports suggest that residual monomer may be responsible for mucosal irritation and sensitization of tissues. This information is important, not only to assess the biologic effects of such materials, but also to enable a comparison among the different polymerization methods, thus assisting the clinician in selecting a material with minimal cytotoxicity. This article reviews the literature published from 1973 to 2000, selected by use of a Medline search, associated with cytotoxic effects usually ascribed to acrylic denture base materials.

Biocompatibility of denture base acrylic resins evaluated M culture of L929 cells. Effect of polymerisation cycle and postpoymerisation treatments

Objective: the purpose of this study was to evaluate the effect of two post-polymerisation treatments and different cycles of polymerisation on the cytotoxicity of two denture base resins.Materials and methods: the resins tested were Lucitone 550 and QC 20. Discs of resins were fabricated following the manufacturer's instructions. Lucitone 550 was processed by long cycle or short cycle. The resin QC 20 was processed by reverse cycle or normal cycle. The specimens were divided into groups: (i) post-polymerised in microwave for 3 min at 500 W; (ii) post-polymerised in water-bath at 55 degrees C for 60 min and (iii) without post-polymerisation. Eluates were prepared by placing three discs into a sterile glass vial with 9 ml of Eagle's medium and incubated at 37 degrees C for 24 hours. L929 cells were seeded into 96 3 well culture plates and DNA synthesis was assessed by H-thymidine incorporation assay.Results: the results were submitted to two-way ANOVA and Tukey HSD test. QC 20 specimens polymerised by the normal cycle and submitted to microwave post-polymerisation were graded as moderately cytotoxic. Similar results were observed for Lucitone 550 processed by long cycle without post-polymerisation. The other experimental groups were graded as not cytotoxic. After water-bath post-polymerisation, specimens of Lucitone 550 processed by long cycle produced significantly lower inhibition of DNA synthesis than the other groups.Conclusion: the long cycle increased the cytotoxicity of Lucitone 550 and water-bath post-polymerisation reduced the cytotoxicity of Lucitone 550 processed by long cycle.

PHEIDOLE ANTS AS POTENTIAL BIOLOGICAL-CONTROL AGENTS OF THE BOLL-WEEVIL, ANTHONOMUS-GRANDIS (COL, CURCULIONIDAE), IN SOUTHEAST BRAZIL

This study evaluates the potential of ants as natural biological control agents of the boil weevil (Anthonomus grandis), during the between-season period, in South-east Brazil. Active adults of Anthonomus were experimentally distributed on the ground of the cotton field. Results show that 20% of the adult Anthonomus are attacked and removed by foraging ants. The native ant Pheidole oliveirai was by far the most efficient predator, accounting for 94% of the predation on Anthonomus. Recruited workers of P. oliveirai were usually very fast at transporting the weevils to their nests. The potential benefit of suppressing overwintering adult Anthonomus during the between-season period is mainly that of reducing the risk of high level infestations during the next cropping cycle.

Clinical evaluation of abutment teeth of removable partial denture by means of the Periotest method

Prosthodontics should be one of the means of establishing conditions for the maintenance of periodontal health. The forces applied to the abutment teeth and their effects are very important considerations in the design and construction of the removable partial dentures. This 6-month follow-up clinical study evaluated the degree of mobility of abutment teeth of distal extension and tooth supported removable partial dentures by using Periotest. Two types of clasp design were selected for evaluation. In cases with unilateral and bilateral distal-extension, a clasp design including a T clasp of Roach retentive arm, a rigid reciprocal arm and a mesial rest were used. For the abutments of tooth-supported removable partial dentures, a second clasp design with a cast circumferential buccal retentive arm, a rigid reciprocal clasp arm and a rest adjacent to the edentulous ridges was selected. A total of 68 abutment teeth was analysed. Periotest values were made at the time of denture placement (control) and at 1, 3 and 6 months after the denture placement. The statistical analysis was performed using Friedman test. All analysis was performed at a 0.05 level of significance. The results revelled that no significant changes in tooth mobility were observed during the 6-months follow-up (P > 0.05). In conclusion, our findings suggest that adequate oral hygiene instructions, careful prosthetic treatment planning and regular recall appointments play an important role in preventing changes in abutment tooth mobility caused by removable partial denture placement.

Increased Levels of NOTCH1, NF-kappa B, and Other Interconnected Transcription Factors Characterize Primitive Sets of Hematopoietic Stem Cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cytotoxicity of denture base resins: Effect of water bath and microwave postpolymerization heat treatments

Purpose: This study compared the effect of two postpolymerization heat treatments on the cytotoxicity of three denture base resins on L929 cells using 3H-thymidine incorporation and MTT assays. Materials and Methods: Sample disks of Lucitone 550, QC 20, and Acron MC resins were fabricated under aseptic conditions and stored in distilled water at 37°C for 48 hours. Specimens were then divided into three groups: (1) heat treated in microwave oven for 3 minutes at 500 W; (2) heat treated in water bath at 55°C for 60 minutes; and (3) no heat treatment. Eluates were prepared by placing three disks into a sterile glass vial with 9 mL of Eagle's medium and incubating at 37°C for 24 hours. The cytotoxic effect from the eluates was evaluated using the 3H-thymidine incorporation and MTT assays, which reflect DNA synthesis levels and cell metabolism, respectively. Results: The components leached from the resins were cytotoxic to L929 cells when 3H- thymidine incorporation assay was employed. In contrast, eluates from all resins revealed noncytotoxic effects as measured by MTT assay. For both MTT assay and 3H-thymidine incorporation, the heat treatments did not decrease the cytotoxicity of the materials tested. Conclusion: Resins were graded by 3H-thymidine incorporation assay as slightly cytotoxic and by MTT assay as noncytotoxic. Cytotoxicity of the denture base materials was not influenced by microwave or water bath heat treatment.

Effect of post-polymerization heat treatments on the cytotoxicity of two denture base acrylic resins

Introduction: Most denture base acrylic resins have polymethylmethacrylate in their composition. Several authors have discussed the polymerization process involved in converting monomer into polymer because adequate polymerization is a crucial factor in optimizing the physical properties and biocompatibility of denture base acrylic resins. To ensure the safety of these materials, in vitro cytotoxicity assays have been developed as preliminary screening tests to evaluate material biocompatibility. 3H-thymidine incorporation test, which measures the number of cells synthesizing DNA, is one of the biological assays suggested for cytotoxicity testing. Aim: The purpose of this study was to investigate, using 3H-thymidine incorporation test, the effect of microwave and water-bath post-polymerization heat treatments on the cytotoxicity of two denture base acrylic resins. Materials and Methods: Nine disc-shaped specimens (10 x 1 mm) of each denture base resin (Lucitone 550 and QC 20) were prepared according to the manufacturers' recommendations and stored in distilled water at 37°C for 48 h. The specimens were assigned to 3 groups: 1) post-polymerization in a microwave oven for 3 min at 500 W; 2) post-polymerization in water-bath at 55°C for 60 min; and 3) without post-polymerization. For preparation of eluates, 3 discs were placed into a sterile glass vial with 9 mL of Eagle's medium and incubated at 37°C for 24 h. The cytotoxic effect of the eluates was evaluated by 3H-thymidine incorporation. Results: The results showed that the components leached from the resins were cytotoxic to L929 cells, except for the specimens heat treated in water bath (p<0.05). Compared to the group with no heat treatment, water-bath decreased the cytotoxicity of the denture base acrylic resins. Conclusion: The in vitro cytotoxicity of the tested denture base materials was not influenced by microwave post-polymerization heat treatment.

Associação entre otalgia, zumbido, vertigem e hipoacusia com desordens temporomandibulares

Because nonespecific symptoms and signs are associated with others well-established in the temporomandibular disorders, it is difficult for the clinician to decide what symptoms and signs should be considered during the diagnosis and the treatment plan. Therefore, the aim of this literature review was to evaluate the prevalence of aural symptoms (otalgias, tinnitus, dizziness and deafness) in patients with orofacial pain. Although several hypotheses have been proposed to explain the association between aural symptoms and temporomandibular disorders, the results of the previous studies differed in magnitude. For this reason, it is difficult to establish the prevalence of these aural symptoms concomitantly with temporomandibular disorders. Moreover, such relationship does not necessarily imply a cause-effect relationship. Because of the diagnosis complexity, different treatments must be considered, so the nonespecific symptoms of temporomandibular disorders can be effectively controlled as well. It is crucial for the the clinician to be aware of the possible etiology of aural symptoms, so he should determine if such symptoms may be associated with temporomandibular disorders and thus include them in the treatment.

Color stability of resins and nylon as denture base material in beverages

Purpose: Staining of prosthodontic materials may result in patient dissatisfaction and additional expense for replacement. This study aimed to determine the color stability of two heat-cured denture base acrylic (Lucitone 550, Vipi Cril) and one nylon denture base resin (Transflex) after immersion in beverages. Materials and Methods: Forty disks of each resin (20.0-mm diameter, 3.0-mm thick) were prepared and stored in distilled water for 24 hours at 37°C. During that time (T 0), the color of all specimens was spectrophotometrically measured. Each specimen was immersed in coffee, cola, red wine, and distilled water as a means of control. After 15-day (T 1) and 30-day (T 2) periods of immersion, the color of the specimens was measured again. The CIE (Commission Internationale de L' Eclairage) L*a*b* system was used to determine mean ΔE (color changes) values for each material and compared statistically with two-way ANOVA and Bonferroni intervals at 0.95. Results: In ΔET 0T 1 and ΔET 0T 2 the most severe staining was apparent with red wine (p < 0.001), followed by coffee (p < 0.01), when compared to the specimens stored in distilled water. Transflex also showed significant color change after immersion in cola (p < 0.01). In ΔET 1T 2 only red wine promoted significant staining of all resins (p < 0.0001). Conclusion: Chromatic changes were exhibited by specimens immersed in red wine, followed by coffee. For Transflex, cola also promoted color changes. The values of color changes converted to National Bureau of Standard units showed them to be perceivable to the human eye. © 2011 by the American College of Prosthodontists.

Search for a light charged Higgs boson in top quark decays in pp collisions at √s = 7 TeV

Results are presented on a search for a light charged Higgs boson that can be produced in the decay of the top quark t → H +b and which, in turn, decays into τ +ν t. The analysed data correspond to an integrated luminosity of about 2 fb -1 recorded in protonproton collisions at √s = 7 TeV by the CMS experiment at the LHC. The search is sensitive to the decays of the top quark pairs tt̄ → H ±W ∓bb̄ and tt̄ → H ±H ∓bb̄. Various final states have been studied separately, all requiring presence of a τ lepton from H + decays, missing transverse energy, and multiple jets. Upper limits on the branching fraction B(t → H +b) in the range of 2-4% are established for charged Higgs boson masses between 80 and 160 GeV, under the assumption that B(H + → τ +ν τ) = 1.