Development and sensory analysis of shampoo for curly hair

Objective: This study aimed to compare the sensory performance of a shampoo formulation with Polyurethane-14, AMP-acrylates copolymer (PAAC) in relation to control formulation in curly and natural hair tresses. Methods: Curly and natural hair tresses (n = 8) of equal size and weight were pre-treated by washing with a standard shampoo. After the hair tresses were treated with a formulation containing polymer (formulation A) and compared to hair tresses treated with control formulation (Formulation B). Each panelist (n=2) is asked to indicate which tress performs better for each of seven sensory attributes evaluated (quantity and creamy foam, combing, wet touch, frizz formation, curl definition and volume). It was collected images of hair tresses at 0, 1, 2, 4 and 24 hours of washing, comparing the attributes: volume, frizz formation and curl definition. The results were analyzed using table to test of paired assessment, being: SUPERIOR results - 8 and 7 positive evaluations; SIMILAR results - 2 to 6 positive evaluations; INFERIOR results - 1 and 0 positive evaluations. Results: The addition of the PAAC on the shampoo formulation provided definition and modeling of curls, reducing volume and frizz in 24 hours. There was also lower foam formation in the formulation with polymer PAAC. However, it is important to note that this attribute has inversely proportional effect to the creamy foam, since more creamy foam, smaller quantity. Conclusions: It was concluded that the shampoo developed was effective in defining and modeling curl in natural and curly hair.

Liquid foam templates associated with the sol-gel process for production of zirconia ceramic foams

The unique properties of ceramic foams enable their use in a variety of applications. This work investigated the effects of different parameters on the production of zirconia ceramic foam using the sol-gel process associated with liquid foam templates. Evaluation was made of the influence of the thermal treatment temperature on the porous and crystalline characteristics of foams manufactured using different amounts of sodium dodecylsulfate (SDS) surfactant. A maximum pore volume, with high porosity (94%) and a bimodal pore size distribution, was observed for the ceramic foam produced with 10% SDS. Macropores, with an average size of around 30 μm, were obtained irrespective of the SDS amount, while the average size of the supermesopores increased systematically as the SDS amount was increased up to 10%, after which it decreased. X-ray diffraction analyses showed that the sample treated at 500 °C was amorphous, while crystallization into a tetragonal metastable phase occurred at 600 °C due to the presence of sulfate groups in the zirconia structure. At 800 and 1000 °C the monoclinic phase was observed, which is thermodynamically stable at these temperatures. © 2013 by the authors; licensee MDPI, Basel, Switzerland.

Anthelmintic efficacy of an oral formulation of Aurixazol against gastrointestinal nematodes of naturally and experimentally infected sheep

As a result of the need to develop new active principles for the control of endoparasites in ruminants, the present in vivo study evaluated a formulation containing 24% Aurixazol (48 mg/kg), a parasiticide molecule based on disophenolate of levamisole. Two experiments were conducted: one evaluating the anthelmintic efficacy of 24% Aurixazol (48 mg/kg) against gastrointestinal nematodes in naturally infected sheep, compared to an association of ivermectin (0.2 mg/kg) + albendazole (5.0 mg/kg) + levamisole (7.5 mg/kg) (IAL), and a second one which evaluated the persistent efficacy of the same formulation against immature stages (L4) and adults of Haemonchus contortus in experimentally infected animals. In experiment I, against H. contortus, the formulation of Aurixazol and the IAL association reached efficacies (arithmetic means) of 99.32% and 96.11%, respectively. For Trichostrongylus colubriformis, the efficacy values were 88.92% and 98.08% for Aurixazol and the IAL association, respectively. Both formulations were totally effective against Oesophagostomum columbianum (100%). The results of the statistical analysis demonstrated that the mean parasitic burden of treated animals was significantly different (P ≤ 0.05) compared to the average number of helminths diagnosed in animals from the control group for H. contortus, T. colubriformis and O. columbianum. Comparing only the treated groups, it was possible to verify that the average number of H. contortus recovered from animals treated with Aurixazol was different (P ≤ 0.05) when compared to the mean amount recovered from sheep treated with the IAL association. When evaluating the prevention of H. contortus infection in experiment II, Aurixazol did not present preventive efficacy. Up until 21 days after treatment the groups treated with Aurixazol contained less adults and L4 of H. contortus (P ≤ 0.05) when compared to the non-medicated control group. However, future studies will be necessary to assess the effectiveness of Aurixazol against nematode strains resistant to levamisole and disophenol, but the efficacy results described in this study allow to state that Aurixazol can, associated with other measures, become an important tool in the control of sheep nematodes. © 2013.

Produção de cerveja com mel: características físico-químicas, energética e sensorial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização físico-química de cervejas elaboradas com mel

The aim of this study was to produce and physicochemically characterize beer elaborated with honey. Beer production assays were carried out with nine treatments, the combination of three concentrations of the original extract (11, 13 and 15 ºBrix) with three percentages of honey in the wort formulation (0, 20 and 40%). The experiment was completely randomized with two replicates, giving a total of eighteen trials. Mashing was carried out by infusion and the honey was added during the boiling step. After clarification, the extract content was corrected with water and the wort then inoculated with bottom-fermenting yeast. Fermentation was at 10 ºC. The beer was bottled manually and stored in a freezer at a temperature of 0 ºC for 15 days, for maturation. The beers were analyzed for their alcohol content, true extract, apparent extract, colour, bitterness, turbidity, pH, total acidity, carbon dioxide, foam density and total foam. The results of the physicochemical analysis were subjected to an analysis of variance, and the means compared by Tukey's test at 5% probability. All beers were considered to be pale. The presence of honey in the formulation enhanced carbonation, foam density and total foam, but the beers were less bitter and less acid.

Neurotoxicity of neem commercial formulation (Azadirachta indica A. Juss) in adult zebrafish (Danio rerio)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Simplified skin-effect formulation for power transmission lines

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surfactant-cosurfactant interactions and process parameters involved in the formulation of stable and small droplet-sized benznidazole-loaded soybean O/W emulsions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Hydrogen sulphide removal from air by biotrickling filter using open-pore polyurethane foam as a carrier

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Formulation of Pseudomonas chlororaphis strains for improved shelf life

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nonlinear formulation based on FEM, Mazars damage criterion and Fick's law applied to failure assessment of reinforced concrete structures subjected to chloride ingress and reinforcements corrosion

Structural durability is an important design criterion, which must be assessed for every type of structure. In this regard, especial attention must be addressed to the durability of reinforced concrete (RC) structures. When RC structures are located in aggressive environments, its durability is strongly reduced by physical/chemical/mechanical processes that trigger the corrosion of reinforcements. Among these processes, the diffusion of chlorides is recognized as one of major responsible of corrosion phenomenon start. To accurate modelling the corrosion of reinforcements and to assess the durability of RC structures, a mechanical model that accounts realistically for both concrete and steel mechanical behaviour must be considered. In this context, this study presents a numerical nonlinear formulation based on the finite element method applied to structural analysis of RC structures subjected to chloride penetration and reinforcements corrosion. The physical nonlinearity of concrete is described by Mazars damage model whereas for reinforcements elastoplastic criteria are adopted. The steel loss along time due to corrosion is modelled using an empirical approach presented in literature and the chloride concentration growth along structural cover is represented by Fick's law. The proposed model is applied to analysis of bended structures. The results obtained by the proposed numerical approach are compared to responses available in literature in order to illustrate the evolution of structural resistant load after corrosion start. (C) 2014 Elsevier Ltd. All rights reserved.

Reproductive toxicology and clastogenic evaluation in mice of a phytotherapeutic formulation obtained from Cinchona calisaya Weddel (Rubiaceae) used in Brazilian folk medicine as female fertility stimulant

Ethnopharmacological relevance: In Brazil, a phytotherapeutic preparation produced from a standardized tincture of Cinchona calisaya Weddel such that each mL of product contains 400 mu g of quinine, known in Portuguese as Agua Inglesa (R) (English water), is indicated by the manufacturer as a tonic, appetite stimulant, and digestive. However, this preparation has long been used in folk medicine as a female fertility stimulant. Despite its widespread use in folk medicine to stimulate female fertility, no study has been undertaken to assess the potential teratogenic and genotoxic effects of this phytotherapeutic preparation. The aim of the present study was to investigate possible toxic reproductive effects in mice caused by exposure to Agua Inglesa (R), either before mating or during the pre- and post-embryo implantation periods. The genotoxic potential was evaluated using the micronucleus assay.Material, Methods, and Results: Virgin female mice, with at least one estrous cycle evidenced by vaginal cytology, were divided into five groups of 15 individuals each (Group I - control, Group II - treated with ethanol solution at 16%, Groups III, IV and V treated with phytotherapeutic preparation at 1.5 mL/kg/day, 3.0 mL/kg/day and 4.5 mL/kg/day, respectively). After the first 28 days of treatment, females were caged individually with adult fertile males. Pregnant females continued to receive treatment for seven days (preimplantation period). Body weight was recorded weekly during treatment. Signs of toxicity (weight loss, food intake, piloerection, apathy, prostration, diarrhea, seizures, behavioral changes, and locomotion) were also observed. The females were sacrificed on the 15th day of pregnancy, uterine horns were evaluated for implantation, and the placental index was recorded. In the micronucleus test, 2000 polychromatic erythrocytes (PCE) per animal, obtained from bone marrow, were scored. Results The results showed that exposure of the females during the pre- and post-implantation periods did not significantly alter the reproductive capacity (p < 0.05); however, in higher dose (three times human dose)reduction of fetal weight was observed. There was no difference between the control and phytotherapeutic preparation (p > 0.05) in terms of the average number of micronucleated polychromatic erythrocytes.Conclusions: Although folk medicine suggests that the Agua Inglesa (R) preparation is useful as a female fertility stimulant, no such effect was confirmed in mice. (C) 2014 Elsevier Ireland Ltd. All rights reserved.

Inverse Modeling of GPS Multipath for Snow Depth Estimation-Part I: Formulation and Simulations

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

MORTALITY OF ANTICARSIA GEMMATALIS (LEPIDOPTERA: NOCTUIDAE) CATERPILLARS POST EXPOSURE TO A COMMERCIAL NEEM (AZADIRACHTA INDICA, MELIACEAE) OIL FORMULATION

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A BOUNDARY ELEMENT FORMULATION FOR MASONRY WALLS: NON-LINEAR ANALYSIS

In this work, a non-linear Boundary Element Method (BEM) formulation with damage model is extended for numerical simulation of structural masonry walls in 2D stress analysis. The formulation is reoriented to analyse structural masonry, the component materials of which, clay bricks and mortar, are considered as damaged materials. Also considered are the internal variables and cell discretization of the domain. A damage model is used to represent the material behaviour and the domain discretization is also proposed and discussed. The paper presents the numerical parameters of the damage model for the material properties of the masonry components, clay bricks and mortar. Some examples are shown to validate the formulation.