Identificação e mapeamento da dinâmica fluvial com fins à avaliação da sensibilidade ao derrame de óleo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sensibilidade ambiental fluvial a derrames de óleo e biocombustível: vulnerabilidade e impactos à mastofauna

O trabalho apresentado é constituído de dois capítulos distintos, ambos com preocupação recorrente de realizar uma ciência que tenha interface com a realidade, uma Ecologia aplicável às questões e demandas da sociedade contemporânea como ferramenta para compreender a realidade, mediar conflitos. No capítulo I - Integrando o meio físico, biológico e sócioeconômico na proposição de novos Índices de Sensibilidade Ambiental (ISA) propomos o desenvolvimento de índices que combinem aspectos bióticos, socioeconômicos e ecológicos como: a) Índice de Sensibilidade Ambiental Biológico (ISAB), pautado na comunidade de mamíferos de médio e grande porte; b) Índice de Sensibilidade Ambiental Socioeconômico (ISASE), composto pelo tipo de atividade econômica e pelas características da comunidade do entorno e c) Índice de Sensibilidade Ambiental Ecológico (ISAEc). No capítulo II - Contribuição da área do fragmento e dos corredores ecológicos para a comunidade de mamíferos de médio e grande porte das matas ciliares, ressaltamos a importância da Ecologia da Paisagem para a presença/ausência de espécies de mamíferos de médio e grande porte. Quais correlações são relevantes e como as métricas da paisagem têm influência sobre a comunidade da mastofauna. Há a clara intenção de compreender a realidade e propor soluções para as problemáticas modernas visando o bem estar da sociedade e a conservação e preservação da biota

Diagnóstico da suscetibilidade à erosão linear, fluvial e assoreamento em trecho da Bacia do Rio Passa Cinco, Ipeúna-SP

Este trabalho teve como tema principal o mapeamento geológico-geotécnico de determinado trecho da Bacia do rio Passa Cinco, e sua suscetibilidade a processos erosivos lineares, fluviais e de assoreamento. A área tem 129km2 e está situada principalmente no município de Ipeúna, estado de SP. O estudo foi desenvolvido a partir de análise por sensoriamento remoto (land systems) de fotos aéreas e associação a mapas geológicos, geomorflógicos, pedológicos e perfis de alteração. Esta análise integrada permitiu a divisão da área em dez Unidades Básicas de Compartimentação (UBCs), com base na metodologia apresentada por VEDOVELLO em diversos trabalhos. Foram obtidas dez Unidades Básicas de Compartimentação, apresentadas na ordem de ocorrência na Depressão Periférica (6 Unidades) e no relevo escarpado (4 Unidades). A partir desta compartimentação, verificações em campo e imagens de satélite foram adotados parâmetros para a análise quanto a suscetibilidade a aos processos erosivos lineares, fluviais e de assoreamento, obtendo-se três Unidades com alta suscetibilidades a processos erosivos lineares, e uma Unidade com alta suscetibilidade a processos erosivos fluviais e assoreamento. Como produto foi gerado um Mapa geológico–geotécnico em escala 1:50.000, com perfil representativo da área e uma tabela-síntese com as principais características e análise de suscetibilidade aos processos analisados

Análise espaço-temporal do escoamento fluvial nas bacias hidrográficas dos rios Aguapeí e Peixe, Oeste Paulista, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Air abrasion before and/or after zirconia sintering: surface characterization, flexural strength, and resin cement bond strength

The purpose of this in vitro study was to evaluate the effect of air-abrasion/zirconia sintering order on the yttria partially stabilized tetragonal zirconia polycrystal (Y-TZP) surface characterization (roughness, morphology, and phase transformation), flexural strength (FS), and shear bond strength (SBS) to a resin cement. Y-TZP specimens were air abraded with 50-μm Al2O3 particles after (AS), before (BS), or before and after zirconia sintering (BAS). For roughness (Ra), 30 block specimens (12×12×3.0 mm; n=10) had their surfaces analyzed by a profilometer. Next, on the air-abraded surfaces of these specimens, composite resin discs (n=30) were bonded with RelyX ARC. The bonded specimens were stored for 24 hours in distilled water at 37°C before shear testing. Failure mode was determined with a stereomicroscope (20×). The surface morphology (n=2) was evaluated by SEM (500×). For the four-point flexural strength test (EMIC DL2000), 39 bar-shaped specimens (20×4.0×1.2 mm; n=13) were air abraded according to the three conditions proposed, and an additional group (nonabraded) was evaluated (n=13). The quantitative analysis of phase transformation (n=1) was completed with Rietveld refinement with X-ray diffraction data. Ra (μm) and SBS (MPa) data were analyzed by one-way analysis of variance (ANOVA) and the Tukey test (α=0.05). Pearson correlation analysis was used to determine if there was a correlation between roughness and SBS. For FS (MPa) data, one-way ANOVA and the Dunnett C-test (α=0.05) were used. The air-abrasion/zirconia sintering order influenced significantly (p<0.001) Ra, SBS, and FS. The BS and AS groups presented the highest (1.3 μm) and the lowest (0.7 μm) Ra. The highest SBS (7.0 MPa) was exhibited by the BAS group, followed by the AS group (5.4 MPa) and finally by the BS group (2.6 MPa). All groups presented 100% adhesive failure. A weak correlation (r=−0.45, p<0.05) was found between roughness and SBS. The air-abrasion/zirconia sintering order provided differences in the surface morphology. The nonabraded (926.8 MPa) and BS (816.3 MPa) groups exhibited statistically similar FS values but lower values than the AS (1249.1 MPa) and BAS (1181.4 MPa) groups, with no significant difference between them. The nonabraded, AS, BS, and BAS groups exhibited, respectively, percentages of monoclinic phase of 0.0 wt%, 12.2 wt%, 0.0 wt%, and 8.6 wt%. The rougher surface provided by the air-abrasion before zirconia sintering may have impaired the bonding with the resin cement. The morphological patterns were consistent with the surface roughness. Considering the short-term SBS and FS, the BAS group exhibited the best performance. Air abrasion, regardless of its performance order, provides tetragonal to monoclinic transformation, while sintering tends to zero the monoclinic phase content.

Can Application of Universal Primers Alone Be a Substitute for Airborne-Particle Abrasion to Improve Adhesion of Resin Cement to Zirconia?

Purpose: To determine whether universal primers alone can deliver similar levels of adhesion of resin cement to zirconia ceramic when compared to their application in conjunction with airborne-particle abrasion.Materials and Methods: Sintered zirconia blocks (N = 160) (Lava, 3M ESPE), (5.25 x 5.25 x 3 mm(3)) were embedded in acrylic resin, polished, and randomly distributed into 16 groups (n = 10 per group), according to the factors "universal primer" (8 levels) and "air-particle abrasion" (2 levels): 1. ctr: control, without application of a universal primer; 2. AP: Alloy Primer; 3. MP: Monobond Plus; 4. MZP: Metal Zirconia Primer; 5. MZ: MZ Primer; 6. Sg: Signum Zirconia Bond; 7. SbU: Singlebond Universal; 8. ZP: Z Prime Plus. The universal primers were also used after air abrasion (A) of zirconia to form the following 8 groups: Ctr-A, AP-A, MP-A, MZP-A, MZ-A, Sg-A, SbU-A, and ZP-A. After ultrasonic cleaning, air abrasion was performed using Al2O3 particles (110 mu m, 2.5 bar, 20 s at 10 mm) in a chairside air-abrasion device. After ultrasonic cleaning again, universal primers were applied according to each manufacturer's recommendation. The resin cement (RelyX ARC, 3M ESPE) was built up incrementally and photo-polymerized on the zirconia surface using a silicone mold (empty set = 3.5, height = 3 mm). All specimens were stored in distilled water (60 days at 37 degrees C) and then subjected to shear bond strength testing (SBS) in a universal testing machine (1 mm/min). On a separate set of zirconia specimens, contact angle measurements were made using the sessile drop technique with a goniometer after the application of universal primers on control and air-abraded zirconia surfaces. Data (MPa) were analyzed using one-way ANOVA, Tukey's test, and Student's t-test (alpha = 0.05).Results: When universal primers were used alone, SbU presented significantly higher mean SBS (19.5 +/- 5.8) that did the other primers (0 to 9.9 +/- 6.6) (p = 0.001). When air abraded, the groups AP-A (14.1 +/- 6.1), MP-A (15.9 +/- 5.4), ZP-A (16.9 +/- 7.3), SG-A (19.1 +/- 2.1), SbU-A (12 +/- 1.5) showed significant differences (p = 0.03). Adhesive performance of all universal primers was enhanced after air abrasion, with the exception of the SbU and MZ primers. After air abrasion, contact angle measurements were lower for the each primer (without air abrasion: 28.9 to 83.9; with air abrasion: 27.1 to 63.0), except for MZP.Conclusion: Air abrasion with 110 mu m Al2O3 followed by universal primer application increased the bond strength of tested resin cement to zirconia, with the exception of SbU and MZ.

Multistep taphonomic alterations in fluvial mollusk shells: a case study in the touro passo formation (pleistocene–holocene), Southern Brazil

Accurate paleoenvironmental reconstruction relies on the correct interpretation of the postmortem history of skeletal remains in shelly assemblages. In contrast to marine settings, actualistic taphonomic studies are lacking for shell-rich concentrations in freshwater riverine systems. In particular, the taphonomic pathways and the origins of taphonomic signatures that are recorded in bioclasts from fluvial settings are poorly known. In this study, we addressed this issue by comparing the taphonomic signatures and shell-damage profiles among shells of freshwater mollusks recorded both in death and in fossil assemblages from the same fluvial environment. Our data indicated that dissolution was the most pervasive taphonomic process leading to the destruction of the shells. The loss of taphonomic information extended beyond shell dissolution in the riverbed, or the early diagenesis in the sedimentary record. The loss of biological information from the living community through the death assemblage, until the incorporation of shells as fossils, mainly occurred during the time the shells were in the sediment-water interface. Though this destruction affected primarily dead shells, reworked fossils also became vulnerable because they were carried out into the river load again by channel avulsion. A model that included the main taphonomic pathways followed by the molluscan shells in the fluvial Touro Passo Formation (Pleistocene-Holocene) is discussed. In this model, two main destructive domains were recognized, which were the biological, physical, and chemical processes operating at the taphonomically active zone (= TAZ domain) and the pedogenetic domain.

Abrasion resistance of direct and indirect resins as a function of a sealant veneer

Abrasive wear is one of the most common type of wear that not only affect teeth, as also dental restorations. Thus to investigate one of the etiological factors as tooth brushing procedure is clinical relevant in order to select the best material combination that may prevent damage of resin dental restoration's abrasion. This study evaluated the influence of tooth brushing on mass loss and surface roughness of direct Venus (Vs) and indirect Signum (Sg) resin composites, with and without a surface sealant, Fortify (F). Twenty-four specimens were prepared with each resin composite, using their proprietary curing units, according to manufacturer's instructions. All the specimens were polished and ultrasonically cleaned in distilled water for 5 minutes. Half of the specimens of each resin (n = 12) were covered with F (Vs F and Sg F ), except for the control (C) specimens (Vs C and Sg C ), which were not sealed. Mass loss (ML) as well as surface roughness (Ra ) was measured for all the specimens. Then, the specimens were subjected to toothbrush-dentifrice abrasion, using a testing machine for 67.000 brushing strokes, in an abrasive slurry. After brushing simulation, the specimens were removed from the holder, rinsed thoroughly and blot dried with soft absorbent paper. The abrasion of the material was quantitatively determined with final measurements of ML and surface roughness, using the method described above. ML data were analyzed by two-way analysis of variance (ANOVA) and the analysis indicated that resin composites were not statistically different; however, the specimens sealed with F showed higher ML. Ra mean values of the groups Vs F and Sg F significantly increased. Tooth brushing affects mainly the roughness of the direct and indirect resin composites veneered with a sealant.

Vulnerabilidade ambiental ao óleo em ambiente fluvial: estudo de caso rio Tietê/Reservatório de Barra Bonita

Pós-graduação em Geociências e Meio Ambiente - IGCE

Balanço entre intemperismo químico e remoção do solo na bacia do Ribeirão Monjolo Grande, Ipeúna (SP), determinado por geoquímica fluvial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ambientes de pedrais como áreas estratégicas para a conservação da biodiversidade fluvial: um estudo da ictiofauna do rio Sapucaí-Mirim (SP) e suas interações tróficas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Simulação em uso dos pisos de madeira de Eucalyptus sp e Corymbia maculata

A caracterização anatômica, física, mecânica e química da madeira fornece informações importantes para sua melhor utilização. Contudo, para que madeiras se tornem boa opção para o mercado de pisos, adicionalmente é necessária a realização de ensaios que simulem suas reais condições em serviço. Esses ensaios simulam o pisoteio executado pelos sapatos de salto com pequenas áreas de pressão, o arraste e a queda de objetos, a resistência à abrasão da superfície e o atrito oferecido durante o deslocamento de pessoas que caminham sobre ele. Grande dificuldade da seleção de novas madeiras para pisos está na ausência de valores de referência físico-mecânicos. O presente trabalho visou a caracterizar as madeiras de Eucalyptus clöeziana F. Muell, de Eucalyptus microcorys F. Muell e de Corymbia maculata Hook, para as propriedades de densidade básica, retratibilidade, aplicação de carga rolante, de atrito estático e dinâmico, endentação causada por cargas aplicadas em pequenas áreas, impacto da esfera de aço cadente e resistência à abrasão. Foi observado que as madeiras estudadas podem ser utilizadas para a confecção de pisos, de acordo com seus resultados obtidos e por meio de comparações com resultados de literatura.

Morfometria de microbacias do Córrego Rico, afluente do Rio Mogi-Guaçu, Estado de São Paulo, Brasil

Este trabalho teve como objetivo avaliar as características morfométricas das microbacias (2ª, 3ª, 4ª e 5ª ordens de magnitude) da bacia hidrográfica do córrego Rico, sub-bacia do Rio Mogi-Guaçu, localizada na região administrativa de Ribeirão Preto, Estado de São Paulo, Brasil. Para tanto, foram determinados os parâmetros físicos e a configuração topográfica natural do sistema de drenagem. Os procedimentos para a obtenção dos dados foram fundamentados em técnicas de sensoriamento remoto e geoprocessamento. A partir da vetorização das cartas topográficas correspondentes à área de estudo, realizou-se a análise morfométrica quanto às características dimensionais, do padrão de drenagem e do relevo no sistema de informação geográfica ArcView. A microbacia é considerada de sexta ordem de magnitude, com área estimada de 542 km², com 85 microbacias de segunda ordem, 22 de terceira, sete de quarta ordem e duas de quinta. Utilizando o critério geométrico, na disposição fluvial das sub-bacias de cabeceiras observou-se a predominância dos modelos dendríticos e subdendríticos, enquanto a jusante predominava o modelo subparalelo, respectivamente, nas áreas de ocorrências dos arenitos Bauru e rochas efusivas básicas.

Influência da escala na análise morfométrica de microbacias hidrográficas

In order to verify the different scales in physical analysis of watersheds, the geomorphic quantitative analysis was done to distinguish homogeneous areas within this land unit. The variables studied were the dimensions, drainage pattern and relief characteristics. The study area is the watershed of the Corrego da Cachoeira, São Paulo State, Brazil. The cartographic scale 1: 50000 (IBGE) and 1: 10000 (IGC) were used to delineate the drainage network and study the morphometric characteristics. The watershed is characterized as an exoreic, fluvial drainage with consequent streams and drainage pattern. The values of the drainage density, frequency of rivers and the ratio of bifurcation are considered low, indicating the formation of the soil on permeable rock. The low values suggested a watershed with relatively mild relief. The detail of the cartography mapping analysed with field study data showed higher values of hydrological compartments and length of the drainage network, reflecting changes in the results obtained on the physical variables analysed.

Longitudinal distribution and seasonality of macroalgae in a subtropical stream impacted by organic pollution

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)