Aplicação de princípios do pensamento enxuto no processo de envio e devolução de correspondências em um banco privado

The success obtained by the Toyota Company in implementing the Toyota Production System was a global case of study that generated different new approaches, such as Lean Thinking. This approach was already successfully applied to various sectors, breeding methodologies as Lean Service, Lean Office or Lean IT. In this paper, the main concepts of Lean Thinking were applied in an information flow through an action research, more specifically in the sending and return of mailing process from a bank. The objectives were to create changes that led to the decrease of the mail returning indexes and ultimately to cost reduction and waste elimination. For this purpose the actual situation was mapped, and after data collection and analysis, a future proposed state was generated for the information flow. Alongside, indicators were conceived for managing process control and a set of implemented and proposed improvements were delivered. The applied Lean Thinking concepts were considered efficient for the application, and the proposed objectives were achieved

Inserção e extração de marca d'água em imagens digitais usando a transformada wavelet

Pós-graduação em Engenharia Elétrica - FEIS

Simulação numérica do escoamento em difusores radiais com discos frontais fixos e móveis

Pós-graduação em Engenharia Mecânica - FEIS

Mídia-educação: da criatividade à livre expressão na escola

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O rádio na educação brasileira

The scenario that outlines this research project is characterized by the centrality of ICT on society and the necessity of having them embedded on education, both face-to-face and distance learning. Amongst the available ICT, the medium radio has been chosen due to its popularity within Brazilian society, as well as its 90 years of initiatives applied on education. Although the radio seems to be historically useful to education, it has been supporting more conservative approaches, such as teaching centred practices, simplytransmitted lessons and assessment based on memorization. On the other hand, Brazilian educational system has been changed since the early 90s, and those reforms brought new challenges to the radio on education, such as training critical listeners, concerned citizens, people with aesthetic sensibility, ethical standards etc. Thus, a systematic assessment of the real educational possibilities of the radio is even more necessary. This research projectaims to retrieve the most prominent educational initiatives using the radio, connecting them to the Brazilian regulatory framework on Education. The methodology consists of desk research and official documents analyses.

O desafio de desenvolver artistas criativos no mundo das mídias digitais

From the second half of the twentieth century, with the proposal of working active listening, exploring sounds, the experience, the search for new forms of contemporary music notation, improvisation and experimental music composition, arise music educators Paynter Schafer and Koellreutter, known by the active method of second generation who contributed greatly to the development of creative processes in the classroom. Also arises, in the same period, the encounter between art and technology, expanding opportunities through digital media, open, participatory and interactive works such as Video art, Web art, Nanoarte and Locative Art, augmented, not only against the art with the public, through connections mediated by digital interfaces, providing new learning situations attractive for the development of creativity and artistic production as challenges in contemporary.

Modelagem numérica do escoamento em válvulas de compressores alternativos pelo método da fronteira imersa com refinamento adaptativo

Pós-graduação em Engenharia Mecânica - FEIS

Violência na escola pública?: o estudo de uma realidade no município de Franca-SP

Pós-graduação em Serviço Social - FCHS

Ferrocene adsorbed into the porous octakis(hydridodimethylsiloxy) silsesquioxane after thermolysis in tetrahydrofuran media: An applied surface for ascorbic acid determination

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A geometric interpretation for transmission real losses minimization through the optimal power flow and its influence on voltage collapse

This work presents an approach for geometric solution of an optimal power flow (OPF) problem for a two bus system (a slack and a PV busses). Additionally, the geometric relationship between the losses minimization and the increase of the reactive margin and, therefore, the maximum loading point, is shown. The algebraic equations for the calculation of the Lagrange multipliers and for the minimum losses value are obtained. These equations are used to validate the results obtained using an OPF program. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Mathematical modeling of the ester oil-refrigerant R134A mixture two-phase flow with foam formation through a small diameter tube

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A pH optode based on thymol blue: application to determination of CO2 using flow injection analysis system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Laminar flow of soursop juice through concentric annuli: Friction factors and rheology

Laminar axial flow of a pseudoplastic fluid food (soursop, juice) in annular ducts has been experimentally investigated. In the first part of the manuscript, the rheological behavior of soursop juice, being essential for the annular flow analysis, was completely determined from 9.3 to 49.4 degrees Brix and temperatures from 0.4 degrees C to 68.8 degrees C, using a rotational rheometer equipped with coaxial cylinders. In order to test the adequacy of the rheology results, pressure loss data in the laminar pipe flow were collected and then experimental and theoretical friction factors were compared, showing excellent agreement, which indicated the reliability of the Power-Law model for describing the soursop juices. In the second part, pressure loss in annular regions was measured and used to estimate friction factors, which were then compared to those resulted from analytical and semi-analytical equations. The principal contributions of this article are to provide a review on the determination of friction factors-Reynolds number of pseudoplastic fluids in annuli, and also supply extensive new experimental data on the rheological properties and pressure loss of an important shear-thinning fluid food, which is of particular interest for the food engineering process design. (c) 2006 Elsevier Ltd. All rights reserved.

Characterization of iron(III)porphyrin-hydroxo complexes in organic media through UV-Vis and EPR spectroscopies

The interaction of OH- with Fe(TPP)(+), Fe(TDCPP)(+), Fe(TMP)(+) and Fe(TFPP)(+) in 1,2-dichloroethane was studied by titrating FeP solutions with aliquots of a solution of tetrabutylammonium hydroxide in acetonitrile. The number of OH- ions (n) coordinated to the FeP and the stability constants (beta(n)) for the FeP-OH- complexes were calculated from UV-Vis absorbance data and iron spin states were determined through EPR spectroscopy, Fe(TMP) (+) forms a high-spin mono-hydroxo complex, while Fe(TPP)I and Fe(TDCPP)(+) form high-spin bis-hydroxo complexes. To our knowledge, this is the first time that the formation of bis-hydroxo complexes from Fe(TPP) (+) has been reported, and this was possible because the studies were carried out in basic organic media, In this same medium, Fe-III-Fe-II reduction upon OH- addition to Fe(TFPP) (+) was observed, without concomitant formation of the mu-oxo dimeric species [Fe(TFPP)](2)O. (C) 1999 Elsevier B.V., All rights reserved.

Transient flow of the oil-refrigerant mixture through the radial clearance in rolling piston compressors

Unsteady flow of oil and refrigerant gas through radial clearance in rolling piston compressors has been modeled as a heterogeneous mixture, where the properties are determined from the species conservation transport equation coupled with momentum and energy equations. Time variations of pressure, tangential velocity of the rolling piston and radial clearance due to pump setting have been included in the mixture flow model. Those variables have been obtained by modeling the compression process, rolling piston dynamics and by using geometric characteristics of the pump, respectively. An important conclusion concerning this work is the large variation of refrigerant concentration in the oil-filled radial clearance during the compression cycle. That is particularly true for large values of mass flow rates, and for those cases the flow mixture cannot be considered as having uniform concentration. In presence of low mass flow rates homogeneous flow prevail and the mixture tend to have a uniform concentration. In general, it was observed that for calculating the refrigerant mass flow rate using the difference in refrigerant concentration between compression and suction chambers, a time average value for the gas concentration should be used at the clearance inlet.