Estudo para determinação da kVp em equipamentos de raios X convencional

The quality assurance control program (QACP) in clinical radiology is very important to acquire, image quality, patient dose reduction and cost for the institution. The verification of the real tension on the x ray tube, it is one of many parameters that may be determined on a QACP. This act on image quality as absorbed dose in patient. Once proved the importance of this fact, this study come up with the determination of tension to any X ray tube used on medical routine, on quick, safe and low cost manner. To reach the aim of this study, the methodology consisted on measuring expose rates (ER) using different thicknesses of copper (Cu) plates like filters and relating these results with Half Layer Value (HLV). Afterwards, the HLV was associated to real tension that was acquired with kilo voltage of peak (kVp) measurers used on clinical routine. So walking in this path, when performed the ER, on any X ray tube, it’s possible acquire the HLV and consequently the real kVp, considering measures obtained before, on the methodology of kVp estimative development

Análise da confiabilidade de equipamentos em uma indústria química com aplicações de ferramentas da melhoria contínua

The constant search for improvements and the survival of organizations makes the strategic guidelines are deployed and executed at the operational levels. This work is the approach to critical analysis of the equipment of a chemical industry through a case study based on the classification of each equipment manufactures through qualitative and quantitative analysis on the pillars of maintenance costs, loss of production, MTBF, contribution margin, Health Safety and Environment (SHE). From this study and future data collection, along with the flow diagram show the main equipment that should be special attention. To this can be prepared an action plan with deadlines and responsible. With the results one can measure the maintenance costs, loss of production and technical availability of the plant, with future gains

Otimização de procedimentos de controle de qualidade em equipamentos radiográficos convencionais do Instituto de Eletrotécnica e Energia - USP

Radiography is currently an important method of diagnosis, both medical, dental and veterinary. The image in this type of survey is obtained using an X-ray beam, where the radiologist can possibly view structures of interest. It isn't always possible to get the desired images due to various factors, such as equipment limitations. The Administrative Law 453/98, the State Resolution SS 625/94, and other standards require testing and quality control acceptance limits that guarantee a good performance of the equipment for the security and quality of care, giving service users greater effectiveness in exams. This study were performed in the accompaniment of testing procedures for quality control established by Administrative Law 453/98 in several X-ray equipment to make a comparison and optimization in the descriptions of the procedures used by the Institute for Electrical Energy and the University of São Paulo (IEE / USP / SP).The optimization of the procedures were performed with the aid of a current literature, the Resolution 453/98, State Resolution SS 625/94 and other international standards. On this basis it was possible to observe the importance of regular monitoring of tests for an update, following the technological development of instruments used in the service

Análise ergonômica de equipamentos odontológicos

This is study proposes to evaluate the ergonomic aspects of dental equipments. Based on the characteristics proposed by ISO/FDI, on the existing literature and related researches an evaluating system was devised. Thirty nine dental clinics were examined using the 165 pointssystem proposed, distributed in 12 criteria. None of the dental clinics examined showed a bad ergonomics level, 41% were good and 59% reached excellent levels. The point-supported evaluation system proposed is effective in the analysis of the ergonomic conditions of dental equipments, allowing a quantification of their characteristics. Using this system, the dentist can also know the level of ergonomic satisfaction existing in his equipment, and identify the conditions to be improved. It was concluded that the equipment belonging to dental workplaces evaluated had excellent level of compliance, however corrective measures are needed since even the presence of a few non-conforming items is a sufficient condition to cause injury to users, decreased efficiency and comfort and loss quality of service

Interferência eletromagnética em equipamentos de diatermia por microondas por aparelhos telefonia móvel celular GSM

Não disponível

Infância, ludicidade e pedagogia hospitalar: encontros e desencontros nas práticas educativas

The aim of this study is to investigate the significance of educational practices aimed at children in non formal education, in this case, specifically, the hospital context. The chosen methodology is part of an investigation conducted in two phases. In the first phase was carried out a theoretical stage, scientifically based studies guided by an historical-cultural and Sociology of Childhood, enabling placement on the particularities of children, the playfulness and the positioning of Pedagogy in the hospital. After this theoretical study was performed the second phase, with the completion of an empirical study with a research and intervention in a hospital playroom, in a public hospital considered a regional center in the northwestern city of São Paulo. The methodological procedures adopted for this empirical study were participant observation, interviews, action research and a questionnaire. Participant observation and action research are conducted within the brinquetodeca in five meetings with about 15 children, interviews were conducted with three family members and the questionnaire was applied to a healthcare professional. Among the results we can mention the following findings: a confirmation of the necessity of work in the hospital directing playful adaptations for the preservation and development of children's learning, and recent publications are scarce about the Hospital Education and underscore the need for the professional practice of education in non-school, the educational activities carried out reveals the possibilities of offering the child the continuation of their educational activities involving the playful and educational, the international and national literature on educational practices in the hospital allow to check ...(Complete abstract click electronic access below)

Proposta de um dispositivo para ajuste automático da altura de uma cama hospitalar

This paper proposes a mechanical device to adapt a simple model of hospital bed used in the Emergency Department at Santa Casa of Guaratinguetá, allowing the bed’s height adjustment with electromechanical drive. This adaptation aims to introduce improvements in the routine work of nurses and reduce ergonomic problems stemming from repetitive strain during the transfer of patients to stretchers and wheelchairs, as well as providing more comfort to the bedridden patient. The device is mainly composed of: an electric induction motor used to drive the engine, a steel spindle with square thread, which allows axial displacement of the bed, a transmission system with pulleys and belt, which transmits power supplied by the motor to the spindle. The mechanism allows the height of the bed is regulated between 400 and 800 mm. The estimated implementation cost of this proposal is lower than the acquisition cost of a commercial hospital bed with the same features, which confirms the feasibility of the proposed solution

Proposta de um dispositivo para adaptação em uma cama hospitalar para ajuste de altura

In hospitals, health professionals may face different situations and problems. By following them, it is remarkable that one of the difficulties is related to the support provided by the facilities to carry out their work. This also affects the quality of treatment offered to patients. One of the points of improvement that could be studied is hospital beds. The Fawler's simplest hospital bed type, used in most Brazilian public hospitals, is designed with an ergonomic average height that offers a default position for analysis and treatment of patients. There is no possibility of adjusting the height of those beds, and hence there is a limitation in this regard since that height is fixed, but the physical structures of the workers and patients may vary widely and there may be a conflict when there are people too large or small involved in this process. Beyond that, studies by experts show that beds with height adjustment decreases the muscular effort and improve the movement quality of the spine of nursing staff, reducing the force on certain vertebrae and also the ergonomic risk. Of course, patient comfort is also affected accordingly. As the beds made with height adjustment are very expensive, this study aims to design a device to adapt the not adjustable beds. The project must be viable from an economic and mechanic standpoint, being able to adapt both old and new simplest Fawler hospital bed models, since their dimensions are similar. The final result shows that it is possible to adapt such beds using the designed concept at a viable cost. Furthermore, this concept could be applied in other bed types or objects that have hollow feet

Implementação de produção enxuta em uma empresa de manutenção de equipamentos rotativos

This graduation work presents the implementation of the key concepts of lean thinking in a maintenance workshop of rotating equipment, analyzing all the administrative and workshop processes. The pursuit of quality and client satisfaction at lower costs has generated a lot of competition between organizations, which use the practices of lean manufacturing as tools for processes improvement, aiming to eliminate wastes, being this, the work objective. And, unlike a manufacturing system, where the product goes through certain stages until its conclusion, the workshop does not have a default sequence that is repeated routinely on all machines. Thus, it demonstrates a possibility of application of lean tools in a different way of the common used in the lean manufacturing

Uso de rastreadores de eventos adversos a medicamentos para farmacovigilância no âmbito hospitalar

Eventos adversos a medicamentos (EAM) ainda são uma das principais limitações nos serviços de cuidados com a saúde, causando risco aos pacientes, além de grande impacto econômico. Assim, fazem-se necessários métodos de identificação de eventos adversos mais eficazes que a tradicional notificação espontânea, a qual revela apenas 5% do total de eventos. A utilização de critérios rastreadores (ou trigger tools), elaborados pelo Institute for Healthcare Improvement, tem se mostrado como a alternativa mais válida e eficiente para a triagem dos EAM. Com o objetivo principal de identificar os principais eventos adversos e medicamentos envolvidos, uma seleção de três critérios rastreadores foi utilizada, a saber: INR (razão normalizada internacional) > 6, WBC (contagem de leucócitos) < 3000/mm³ ou registros de episódios de sedação excessiva, letargia ou queda. Informações sobre os rastreadores foram coletadas e analisadas a partir dos prontuários de pacientes internados no Hospital Estadual Américo Brasiliense internados, de novembro de 2011 a janeiro de 2012 e maio a julho de 2012, a fim de se confirmar a ocorrência de evento adverso. Foram analisados prontuários referentes a 3318 hospitalizações, nas quais foram detectados 69 eventos adversos, 49 dos quais foram causados por apenas quatro das 12 classes de medicamentos envolvidos em algum EAM: anticoagulantes orais, relacionados ao rastreador INR>6 (eficácia = 0,75), sedativos e antipsicóticos, relacionados ao rastreador de sedação excessiva, letargia ou queda (eficácia = 0,52), e antivirais, relacionados ao rastreador WBC<3000 (eficácia = 0,48). Quando os rastreadores eram acionados e não estavam relacionados a EAM, os fatores de confusão mais recorrentes foram: torpor secundário ao quadro clínico, acidentes não relacionados ao medicamento e pacientes propositalmente em regime de sedação. Apesar de valores-limite menos radicais poderem aumentar a ...

Alocação ótima de equipamentos SVC e TCSC na rede de transmissão de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS

Ergonomia e design de vestimentas ocupacionais no Brasil: foco em equipamentos de proteção individual no setor de petróleo e gás

Pós-graduação em Design - FAAC

Aspectos das Condições e Organização do Trabalho na Ocorrência de Acidentes entre Profissionais da Enfermagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da eficácia do tratamento da cessação do tabagismo iniciado durante internação hospitalar em pacientes com doença cardiológica ou respiratória agudizada

Pós-graduação em Fisiopatologia em Clínica Médica - FMB

Metodologia de simulação numérica do comportamento térmico em equipamentos eletroeletrônicos

Pós-graduação em Engenharia Elétrica - FEIS