Análise ergonômica de equipamentos odontológicos

This is study proposes to evaluate the ergonomic aspects of dental equipments. Based on the characteristics proposed by ISO/FDI, on the existing literature and related researches an evaluating system was devised. Thirty nine dental clinics were examined using the 165 pointssystem proposed, distributed in 12 criteria. None of the dental clinics examined showed a bad ergonomics level, 41% were good and 59% reached excellent levels. The point-supported evaluation system proposed is effective in the analysis of the ergonomic conditions of dental equipments, allowing a quantification of their characteristics. Using this system, the dentist can also know the level of ergonomic satisfaction existing in his equipment, and identify the conditions to be improved. It was concluded that the equipment belonging to dental workplaces evaluated had excellent level of compliance, however corrective measures are needed since even the presence of a few non-conforming items is a sufficient condition to cause injury to users, decreased efficiency and comfort and loss quality of service

Interferência eletromagnética em equipamentos de diatermia por microondas por aparelhos telefonia móvel celular GSM

Não disponível

Radioterapia em câncer de mama: importância da determinação da curva de isodose

The study analyzed contours of the thoracic region of patients undergoing radiotherapy of breast tumors in Hospital Manuel de Abreu of Bauru (institution 1) and the Hospital da Faculdade de Medicina of Botucatu (Institution 2). Were prepared isodose curves corresponding to the contours of the patient, which were presented for radiotherapists doctors both hospital services that enabled the choice of the curve isodose that provides the best distribution of radiation dose in the irradiated volume. Some boundaries were digitized in one institution and sent for preparation of isodose lines in the institution 2, both curves plotted in each of the institutions and for the same contour, were compared, showing that the methodology of Curves of distance is feasible and reliable, while optimizing the routine procedures regarding the handling of isodose plans provided by different radiation equipment. It compares the calculation of the exposure time determined using the isodose curve selected by calculating the value obtained considering the PDP at the point of the middle line of separation between the internal and external fields, the difference between the two methods for determining exposure time was around 2.4%. A study on the angle of the radiation beam at the input field (region breast-air) was conducted showing that, once known a tangent angle of the input beam, one can estimate the angle of the wedge filter used in some procedures for uniformity of dose within the irradiated volume compensation and the lack of tissue in the treatment volume. A comparative study between the isodose curves produced manually with the curves obtained in a two-dimensional computer system, the computer system showed that provides further information regarding the dose gradient within the irradiated volume, in addition to reducing the time spent in preparing the curves isodose

Controle de qualidade e levantamento radiométrico em aparelho de Raios-X médico convencional

Along with the advance of technology, in terms of the expansion of medical exams that uses the ionizing radiation for diagnosis, there is also the concern about quality control for maintaining quality in radiographic imaging and for delivering low dose to the patient. Based on the Federal Order 453 of the Secretariat of Health Surveillance, which takes account of the practical and justification of individual medical exposures, the optimization of radiological protection, limitation of individual dose, and the prevention of accidents, were done through this paper radiodiagnostic tests on medical equipment in order to accept it or not, according to SVS-453. Along with the help and support of P&R Consulting and Medical Physics Marilia, SP, were made Quality Control and Radiometric Control in equipment from various cities across the state of São Paulo. The equipment discussed in this work is classified as conventional X-ray. According to the Federal Order SVS-453, the quality control in the program of quality assurance should include the following minimum set of constancy tests, with following minimum frequency: biennial tests for representative values of dose given to the patients of radiography and CT performed in the service; annual tests for accuracy of the indicator tube voltage (kVp), accuracy of exposure time, half-value layer, aligning the central axis of the beam of x-ray tube, performance (mGy / mA.min.m²), linearity of the rate of kerma on air with the mAs, reproducibility of the kerma on air rates, reproducibility of the automatic exposure, focal spot size, integrity of accessories and clothing for individual protection; semiannually for collimation system accuracy; weekly for temperature processing system and sensitometry processing system. For the room Radiometric Survey it was done a sketch...(Complete abstract click electronic access below)

Implementação de produção enxuta em uma empresa de manutenção de equipamentos rotativos

This graduation work presents the implementation of the key concepts of lean thinking in a maintenance workshop of rotating equipment, analyzing all the administrative and workshop processes. The pursuit of quality and client satisfaction at lower costs has generated a lot of competition between organizations, which use the practices of lean manufacturing as tools for processes improvement, aiming to eliminate wastes, being this, the work objective. And, unlike a manufacturing system, where the product goes through certain stages until its conclusion, the workshop does not have a default sequence that is repeated routinely on all machines. Thus, it demonstrates a possibility of application of lean tools in a different way of the common used in the lean manufacturing

A tradução de resumos médicos como meio de aprendizagem do processo tradutório e da terminologia especializada

This paper is part of a larger project that is being developed at our university, whose goal is to enable students of Literature and Translation to detect and analyze linguistic phenomena based on electronic corpora, consisting of original texts and texts translated, which show the general language, literary language and specialized language. One of its aspects is the analysis of medical abstracts and their translation process. Thus, this undergraduate research project, we seek to observe the technical-scientific English language by performing translations of abstracts of scientific articles of Neurology and Oncology.

Alocação ótima de equipamentos SVC e TCSC na rede de transmissão de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS

Ergonomia e design de vestimentas ocupacionais no Brasil: foco em equipamentos de proteção individual no setor de petróleo e gás

Pós-graduação em Design - FAAC

Estudo de possíveis correlações entre miastenia grave e exposiçao crônica a pesticidas em nosso meio

Pós-graduação em Bases Gerais da Cirurgia - FMB

Metodologia de simulação numérica do comportamento térmico em equipamentos eletroeletrônicos

Pós-graduação em Engenharia Elétrica - FEIS

Opiniões e atitudes dos médicos frente às ações promocionais da indústria farmacêutica

The pharmaceutical industry invests heavily in promoting their products, and studies suggest that these actions influence doctor’s prescribing. Therefore, this study aimed to analyze the opinions and attitudes of doctors when facing promotional activities of the laboratories. To this end, questionnaires were sent to doctors in Araraquara (SP) containing statements on the subject. Data analysis included study of the association by the chi-square. The results indicated that physicians relate to the propagandists (98%) by considering them useful (55%), but not as a main source update (86%). For 62% of them their prescriptions are not influenced by such relationships, while 24% disagree that doctors in general are influenced as well as new graduates (37%). The majority also disagrees that are influenced by amenities (86%) or free samples (70%) but only 38% believe their colleagues are not influenced by the samples. As for the ethics of these receipts, 57% considered to be appropriate when benefit patients, but only 32% while for personal use. The results show that doctors are vulnerable to the influences of marketing. Therefore, mechanisms and interventions are needed for prescribing drugs solely by criteria of effectiveness, safety, convenience and accessibility to the patient.

Design universal e acessibilidade: análise ergonomica de equipamentos de ginástica em espaços públicos

In recent years the availability of equipment for exercise in public places increased demand on the principles of universal design, ergonomics and accessibility, since they are intended for use by many different users. This paper presents an analysis of ergonomic equipment and discusses the main problems observed, as well as projective presents parameters for the development of new products.

Problemas ergonômicos enfrentados por profissionais de enfermagem em ambientes hospitalares: aspectos da interface trabalhadores x equipamentos

The ergonomic design seeks to establish parameters to improve the interface between the technologies (products, systems and environments) and between man (users). Among the many factors involved, there are the activities performed in hospital settings, both by patients and by clinical staff. Accordingly, efforts have been demonstrated biomechanical with a leading occupational problem, especially regarding the transfer of patients.

Problemas ergonômicos enfrentados por profissionais de enfermagem em ambientes hospitalares: aspectos da interface trabalhadores x equipamentos

The ergonomic design seeks to establish parameters to improve the interface between the technologies (products, systems and environments) and between man (users). Among the many factors involved, there are the activities performed in hospital settings, both by patients and by clinical staff. Accordingly, efforts have been demonstrated biomechanical with a leading occupational problem, especially regarding the transfer of patients.