Enthalpy-entropy compensation based on isotherms of mango

Dados de equilíbrio da umidade da polpa de manga foram determinados utilizando-se o método estático gravimétrico. As isotermas de adsorção e dessorção foram obtidas na faixa de 30-70 ºC e as atividades de água (a w) de 0,02 a 0,97. A utilização do modelo de GAB nos resultados experimentais, através da análise de regressão não linear, proporcionou um bom ajuste entre os dados experimentais e os valores calculados. O calor isostérico de sorção foi estimado a partir dos dados de equilíbrio de sorção, utilizando-se a equação de Clausius-Clayperon. Notou-se que os calores isostéricos de sorção crescem com o aumento da temperatura e pode ser bem ajustado através de uma relação exponencial. A teoria da compensação entalpia-entropia foi aplicada às isotermas de sorção e gráficos deltaH versus deltaS forneceram as temperaturas isocinéticas, indicando um processo de sorção entalpicamente controlado.

Study of the enthalpy-entropy mechanism from water sorption of orange seeds (C. sinensis cv. Brazilian) for the use of agro-industrial residues as a possible source of vegetable oil production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

STUDIES ON THE USE OF A FORMIC-ACID PROPIONIC-ACID MIXTURE (BIO-ADD(TM)) TO CONTROL EXPERIMENTAL SALMONELLA INFECTION IN BROILER-CHICKENS

Experiments were carried out on the antibacterial effects of a commercial formic acid-propionic acid mixture (Bio-add(TM)) against different Salmonella serptj pes. The preparation exerted a strong antibacterial effect on S. typhimurium strain F98 in artificially contaminated feed. After 28 days storage, the bactericidal effect was still considerable. When chickens were reared on feed that had been treated with Bio-add(TM) and artificially contaminated with different serotypes, S. enteritidis, S. typhimurium and S. agona were not isolated from the caecal contents, but S. infantis was. No organisms of this strain were isolated when a lower feed-contamination rate of bacteria was used.

Water sorption enthalpy-entropy compensation based on isotherms of plum skin and pulp

The net isosteric heat and entropy of water sorption were calculated for plum, based on sorption isotherms obtained by the static gravimetric method at different temperatures (20 to 70 degrees C). The Guggenheim-Anderson-deBoer model was applied to the experimental data giving a good agreement between experimental and calculated values. The net isosteric heat of water sorption, estimated by applying Claussius-Clapeyron equation to sorption isotherms, was found to be different for plum skin and pulp, mainly at low moisture contents, and could be well adjusted by an empirical exponential relationship. Plots of enthalpy in contrast to entropy provided the isokinetic temperatures for skin and pulp, indicating an enthalpy-controlled sorption process. Thermodynamic data on water sorption for plums are not found in literature, as opposed to prunes for which the data are abundant.

Electrical properties of YSZ/NiO composites prepared by a liquid mixture technique

We report the preparation and characterization of yttria-stabilized zirconia/nickel oxide composites (YSZ/NiO). This composite is the precursor material of the cermet YSZ/Ni, which is used as solid oxide fuel cell anode material. The performance of the anode is strongly dependent on the microstructural properties of the cermet. Therefore, the control of the microstructure of the YSZ/NiO composite is a key step for the fabrication of high-performance anodes. In this study, the composites were prepared by a modified liquid mixture technique. Scanning electron microscopy analysis evidenced the good dispersion of the phases and that NiO nanoparticles are spread over the YSZ surface. Sintered pellets were studied by X-ray diffraction and impedance spectroscopy. The main results show that the composite is comprised of a well-dispersed mixture of the two phases. The electrical conductivity data show that there is a strong dependence of the transport mechanism on the relative composition of phases. (c) 2005 Elsevier Ltd. All rights reserved.

Theoretical studies of liquids by computer simulations: the water-acetone mixture.

Monte Carlo simulation results for pure liquid acetone and water-acetone mixtures calculated in the isothermal and isobaric (NPT) ensemble at T=298K and p=1.0atm are presented. The TIP4P model was used for water and optimized potential for liquid simulation (OPLS) force field parameters used for acetone. The results obtained for the average configurational energy as a function of the mole fraction are in good accord with experimental data. Energy partitioning and co-ordination numbers results calculated for equimolar water-acetone solution are compared to similar data obtained for other water-organic liquid mixtures. These results show an increase in water-water interaction energy and co-ordination numbers when the interaction between water and organic liquid molecules decrease. Distribution functions for pure liquid acetone and water-acetone mixtures are presented. Dipole-dipole angular correlation functions obtained for pure liquid acetone show a predominance of dimers with parallel alignment of dipole moments. Radial distribution functions from water-acetone interaction show characteristic features of hydrogen bonded liquids. Radial and angular distribution functions for water-water correlation calculated in pure water and in equimolar water-acetone mixture are compared, showing very similar features in both systems. (C) 1999 Elsevier B.V. B.V. All rights reserved.

Transient flow of the oil-refrigerant mixture through the radial clearance in rolling piston compressors

Unsteady flow of oil and refrigerant gas through radial clearance in rolling piston compressors has been modeled as a heterogeneous mixture, where the properties are determined from the species conservation transport equation coupled with momentum and energy equations. Time variations of pressure, tangential velocity of the rolling piston and radial clearance due to pump setting have been included in the mixture flow model. Those variables have been obtained by modeling the compression process, rolling piston dynamics and by using geometric characteristics of the pump, respectively. An important conclusion concerning this work is the large variation of refrigerant concentration in the oil-filled radial clearance during the compression cycle. That is particularly true for large values of mass flow rates, and for those cases the flow mixture cannot be considered as having uniform concentration. In presence of low mass flow rates homogeneous flow prevail and the mixture tend to have a uniform concentration. In general, it was observed that for calculating the refrigerant mass flow rate using the difference in refrigerant concentration between compression and suction chambers, a time average value for the gas concentration should be used at the clearance inlet.

Microstructural and electrical properties of the sofc anode precursor YSZ/NiO composite prepared by A liquid mixture technique

A detailed study of the microstructural and electrical properties of the yttria-stabilized zirconia/nickel oxide (YSZ/NiO) composite was performed. This material is the precursor to the solid oxide fuel cell anode cermet YSZ/Ni. A liquid mixture technique was developed to produce the YSZ/NiO composite to fabricate high-performance SOFC anodes. This technique resulted in fine and homogeneous powders and specimens with high electrical conductivity. The combined results showed that this technique is suitable for the production of the anode cermet.

Mixture of vitamin C, hesperidin and piperidol exposure in pregnancy: Maternal-fetal repercussions

To evaluate the reproductive performance and the development of their offspring on rat pregnancy. Wistar pregnant rats were gavaged with 0 mg/kg wb/day (control group, n = 20) and 166.5 mg/kg/day of a mixture of vitamin C, hesperidin and piperidol (experimental group, n = 20) during the organogenic period (from day 5 to 14 of pregnancy; positive vaginal smear = day 0). The female rats were killed on day 21 of pregnancy. The number of implantations, resorptions (dead embryos), and live/dead fetuses were counted for the analysis of the postimplantation loss rates. There was neither alteration in maternal reproductive performance, but it was verified an increase of the number of fetuses presenting dilated urether, hydronephrosis, and reduced ossification of skull due to the treatment of female rats with a mixture of vitamin C, hesperidin and piperidol, these abnormalities were considered transitory and may not interfere on offspring development. It was not verified other type of major malformation neither the appearance of fetuses presenting atrophy of upper limbs that it could be associated to use of this drug.

Comparison of β-1,3-glucanase production by Botryosphaeria rhodina MAMB-05 and Trichoderma harzianum Rifai and its optimization using a statistical mixture-design

Botryosphaeria rhodina MAMB-05 produced β-1,3-glucanases and botryosphaeran when grown on glucose, while Trichoderma harzianum Rifai only produced the enzyme. A comparison of long-term cultivation (300h) by B. rhodina demonstrated a correlation between the formation of botryosphaeran (48h) and its consumption (after 108h), and de-repression of β-1,3-glucanase synthesis when glucose was depleted from the nutrient medium, whereas for T. harzianum enzyme production commenced during exponential growth. Growth profiles and levels of β-1,3-glucanases produced by both fungi on botryosphaeran also differed, as well as the production of β-1,3-glucanases and β-1,6-glucanases on glucose, lactose, laminarin, botryosphaeran, lasiodiplodan, curdlan, Brewer's yeast powder and lyophilized fungal mycelium, which were dependent upon the carbon source used. A statistical mixture-design used to optimize β-1,3-glucanase production by both fungi evaluated botryosphaeran, glucose and lactose concentrations as variables. For B. rhodina, glucose and lactose promoted enzyme production at the same levels (2.30UmL -1), whereas botryosphaeran added to these substrates exerted a synergic effect favorable for β-glucanase production by T. harzianum (4.25UmL -1). © 2010 Elsevier B.V.

Chlorine disinfection of dye wastewater: Implications for a commercial azo dye mixture

Azo dyes, the most widely used family of synthetic dyes, are often employed as colorants in areas such as textiles, plastics, foods/drugs/cosmetics, and electronics. Following their use in industrial applications, azo dyes have been found in effluents and various receiving waters. Chemical treatment of effluents containing azo dyes includes disinfection using chlorine, which can generate compounds of varying eco/genotoxicity. Among the widely known commercial azo dyes for synthetic fibers is C.I. Disperse Red 1. While this dye is known to exist as a complex mixture, reports of eco/genotoxicity involve the purified form. Bearing in mind the potential for adverse synergistic effects arising from exposures to chemical mixtures, the aim of the present study was to characterize the components of commercial Disperse Red 1 and its chlorine-mediated decoloration products and to evaluate their ecotoxicity and mutagenicity. In conducting the present study, Disperse Red 1 was treated with chlorine gas, and the solution obtained was analyzed with the aid of LC-ESI-MS/MS to identify the components present, and then evaluated for ecotoxicity and mutagenicity, using Daphnia similis and Salmonella/microsome assays, respectively. The results of this study indicated that chlorination of Disperse Red 1 produced four chlorinated aromatic compounds as the main products and that the degradation products were more ecotoxic than the parent dye. These results suggest that a disinfection process using chlorine should be avoided for effluents containing hydrophobic azo dyes such commercial Disperse Red 1. © 2012 Elsevier B.V..