Orientação e ortorretificação de imagens terrestres nadirais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Planeamiento y análisis integral del paisaje de la cuenca hidrográfica del río buenavista provincia de Manabí-Ecuador para la implementación de políticas de incentivos a la restauración de ecosistemas con fines de conservación (programa socio Bosque-Ecuador)

Pós-graduação em Geografia - FCT

Validity and behaviour of tropospheric gradients estimated by GPS in Corsica

Estimation of tropospheric gradients in GNSS data processing is a well-known technique to improve positioning (e.g. Bar-Sever et al., 1998; Chen and Herring, 1997). More recently, several authors also focused on the estimation of such parameters for meteorological studies and demonstrated their potential benefits (e.g. Champollion et al., 2004). Today, they are routinely estimated by several global and regional GNSS analysis centres but they are still not yet used for operational meteorology.This paper discusses the physical meaning of tropospheric gradients estimated from GPS observations recorded in 2011 by 13 permanent stations located in Corsica Island (a French Island in the western part of Italy). Corsica Island is a particularly interesting location for such study as it presents a significant environmental contrast between the continent and the sea, as well as a steep topography.Therefore, we estimated Zenith Total Delay (ZTD) and tropospheric gradients using two software: GAMIT/GLOBK (GAMIT version 10.5) and GIPSY-OASIS II version 6.1. Our results are then compared to radiosonde observations and to the IGS final troposphere products. For all stations we found a good agreement between the ZWD estimated by the two software (the mean of the ZWD differences is 1 mm with a standard deviation of 6 mm) but the tropospheric gradients are in less good agreement (the mean of the gradient differences is 0.1 mm with a standard deviation of 0.7 mm), despite the differences in the processing strategy (double-differences for GAMIT/GLOBK versus zero-difference for GIPSY-OASIS).We also observe that gradient amplitudes are correlated with the seasonal behaviour of the humidity. Like ZWD estimates, they are larger in summer than in winter. Their directions are stable over the time but not correlated with the IWV anomaly observed by ERA-Interim. Tropospheric gradients observed at many sites always point to inland throughout the year. These preferred directions are almost opposite to the largest slope of the local topography as derived from the world Digital Elevation Model ASTER GDEM v2. These first results give a physical meaning to gradients but the origin of such directions need further investigations.

Semiautomatic object-space road extraction combining a stereoscopic image pair and a TIN-Based DTM

In this letter, a semiautomatic method for road extraction in object space is proposed that combines a stereoscopic pair of low-resolution aerial images with a digital terrain model (DTM) structured as a triangulated irregular network (TIN). First, we formulate an objective function in the object space to allow the modeling of roads in 3-D. In this model, the TIN-based DTM allows the search for the optimal polyline to be restricted along a narrow band that is overlaid upon it. Finally, the optimal polyline for each road is obtained by optimizing the objective function using the dynamic programming optimization algorithm. A few seed points need to be supplied by an operator. To evaluate the performance of the proposed method, a set of experiments was designed using two stereoscopic pairs of low-resolution aerial images and a TIN-based DTM with an average resolution of 1 m. The experimental results showed that the proposed method worked properly, even when faced with anomalies along roads, such as obstructions caused by shadows and trees.

Comparação entre as análises paramétrica e integrada na suscetibilidade a escorregamentos no entorno de dutos: Duto Orbel, Rio de Janeiro

Pós-graduação em Geociências e Meio Ambiente - IGCE

Potencial de ocorrência de avarias ambientais em bacias hidrográficas com ocupação rural mediante análise morfométrica

The understanding of the geo-morphological characteristics allows the identification of flood areas and instability slopes among others important features for land use planning. The study of the hydrological net and the analysis of morphometric parameters help in the geomorphologic characterization, providing specific physics indicators that quantify the risks for environmental damages. The present work used Geographic Information Systems (GIS) and carried out the morphometric analysis of two watersheds in the Alto Rio Sorocaba, municipality of Ibiuna (SP). Using digitalized topographic bases in the scale 1:50,000, the main morphometric parameters were extracted and the Digital Elevation Model (DEM) was obtained. Hence the slope, ground illumination, hill orientation and relief feature maps were elaborated. The characteristics for the two watersheds were quite similar, both have low risks for floods and landslides. Therefore, the concave feature is the predominant hill shape for both watersheds. The morphometric parameters directly related to the river density of the watersheds showed some differences, because the Sorocabuçú watershed presents higher value, resulting in a higher level of relief development. Thus, with this characterization it is possible to provide subsidies for environmental planning actions to the area.

Modelo hidrológico SWAT na determinação das perdas de solo na bacia hidrológica do Rio Pardo - Botucatu/SP

The objective of this work was to evaluate the sediment production in the initial part of the Pardo River Basin - Botucatu/SP from 1994 to 1999, using the mathematical hydrological model SWAT. It was used topographic maps and satellite data manipulated in GIS using the software SPRING 5.1.6. The simulation of sediment production was generated with the aid of an interface between the hydrological model SWAT 2009 with ArcView ®, version 9.3. The maps of Soil, Land Use and Digital Elevation Model (DEM) were generated in the GIS-SPRING 5.1.6 and exported to ArcSWAT 2009. The tabular data related to the parameters of soil and meteorological parameters were entered directly to the SWAT. The model allowed to estimate the sediment production. A sediment average production rate of 33.866 ton ha-1 over the six years of study was computed in the point of discharge of the basin.

Assoreamento de lago integrante da sub-baciado Córrego da Cascata, Botucatu, SP: implicações morfométricas

The watershed is considered a unit of territorial study, planning and land management, and is molded by the local geologic conditions and climate. Thus, this study aimed to assess the morphometric features of the subwatershed of Cascata Stream, in Botucatu (SP), and their implications for the siltation process in a lake. The assessment included indexes generated from data calculated by means of a digitalized cartographic basis georeferenced on the 1:10,000 scale using the software AutoCad map 2004. The software Quantum GIS 1.8 was also employed to generate the digital elevation model (DEM) and the map of declivities which led to the mean declivity (Dm) of the subwatershed. According to the indexes form factor (Kf), sinuosity (Is), circularity (Ic) and compacity coefficient (Kc), the subwatershed had elongated form, low propensity to floods and rapid flow. The draining density (Dd) and relief ratio (Rr) indicated more efficient mean drainage, favoring higher desiccation and mean erosive stage. The roughness coefficient (Cr) indicated that this subwatershed is suited to agriculture. The anthropic intervention at the watershed dividing line is the major factor for sediment carrying in the lake and compromises not only the landscape beauty, but also the aquatic life of this ecosystem.

Classificação automatizada do relevo a partir de parâmetros morfométricos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Numerical solution of the eXtended Pom-Pom model for viscoelastic free surface flows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of cyclosporin A on alveolar bone homeostasis in a rat periodontitis model

Objectives: the administration of cyclosporin A has been associated with significant bone loss and increased bone remodeling. The present investigation was designed to evaluate the effects of cyclosporin A on alveolar bone of rats subjected to experimental periodontitis, using serum, stereometric and radiographic analysis.Methods: Twenty-four rats were divided into one of the following groups with six animals each: group I, control rats; group II, in which the animals received a cotton ligature around the lower first molars; group III, in which the rats received a cotton ligature around the lower first molars and were treated with 10 mg/(kg body weight day) of cyclosporin A; group IV, in which the rats were treated with 10 mg/(kg body weight day) of cyclosporin A. At the end of experimental period, at 30 days, animals were killed and the serum calcium and alkaline phosphatase levels were measured in all groups. The distance from the alveolar bone crest to the cemento-enamel junction was measured radiographically for each mesial surface of the lower first molars of each rat. After histological processing, the stereological parameters: volume densities of multinucleated osteoclasts (V-o), alveolar bone (V-b), marrow (V-m), and relation of eroded surface/bone surface (Es/Bs) were assessed at the mesial region of the alveolar bone.Results: Significant decreases in serum calcium were observed in those groups that received cyclosporin A therapy. No significant changes in serum alkaline phosphatase were observed. The therapy with cyclosporin A combined with the ligature placement decreased the V-b and increased the V-o, V-m and Es/Bs at the mesial surface of lower first molars. on the other hand, the radiographic data showed that cyclosporin A therapy diminished the alveolar bone loss at the mesial surface of the lower first molars.Conclusions: Therefore, within the limits of this study, we suggest that cyclosporin A at immunosuppressive levels can bring about an imbalance in the alveolar bone homeostasis in rats. However, in the presence of inflammatory stimulation, the inhibition of the immune system by cyclosporin A may decrease the initial periodontal breakdown.

A petri net based timing model for hardware/software co-design of digital systems

We have recently proposed an extension to Petri nets in order to be able to directly deal with all aspects of embedded digital systems. This extension is meant to be used as an internal model of our co-design environment. After analyzing relevant related work, and presenting a short introduction to our extension as a background material, we describe the details of the timing model we use in our approach, which is mainly based in Merlin's time model. We conclude the paper by discussing an example of its usage. © 2004 IEEE.

Study of thresholds to burning in surface grinding process

This work aims at finding out the threshold to burning in surface grinding process. Acoustic emission and electric power signals are acquired from an analog-digital converter and processed through algorithms in order to generate a control signal to inform the operator or interrupt the process in the case of burning occurrence. The thresholds that dictate the situation of burn and non-burn were studied as well as a comparison between the two parameters was carried out. In the experimental work one type of steel (ABNT-1045 annealed) and one type of grinding wheel referred to as TARGA model 3TG80.3-NV were employed. Copyright © 2005 by ABCM.

Mesh skin graft and digital pad transfer to reconstruct the weight-bearing surface in a dog

A 2-month-old dog was presented with injuries involving both hind paws. Only the 5th digit and its digital pad were present on the right paw. Following a full-thickness skin graft, the 5th digital pad was transferred distal to the metatarsal bones. The transferred pad permitted weight-bearing on the limb.

Surface Roughness of Acrylic and Silicone-Based Soft Liners: In Vivo Study in a Rat Model

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)