Sintering of zirconia composites obtained by slip casting

Composites containing a matrix of nanometric Ce-stabilized zirconia with an addition of micrometric monoclinic zirconia were processed by slip casting and sintered at a relatively low temperature. The ratio between nanometric and micrometric particles was determined according to the viscosity of the suspensions and the final density of the pellets. An optimum amount of micrometric particles was necessary to achieve improved suspension dispersion and higher pellet density. The amount of deflocculant in the suspensions containing the mixture of micrometric and nanometric particles was optimized by viscosity measurements. The pellets were characterized by dilatometry, Hg porosimetry, density measurement (the Archimedes method) and scanning electron microscopy. Despite the low green density obtained (35-38% of the theoretical density), densities as high as 97.5% were achieved after sintering. (C) 2001 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Nanostructure and properties of ZnO films produced by the pyrosol process

Indium doped ZnO films were deposited by the pyrosol process on glass substrates at different temperatures from solutions containing In/Zn molar ratios up to 10%. The nanostructure of the films was investigated using grazing-incidence small angle X-ray scattering (GISAXS). The mass density was determined by X-ray reflectivity and the composition by X-ray photoelectron spectroscopy. The GISAXS measurements revealed an anisotropic pattern for films deposited at 573 and 623 K and a isotropic one for those deposited at higher temperatures. The anisotropic patterns indicate the presence of elongated nanopores with their long axes perpendicular to the film surface. In contrast, the isotropic nature of GISAXS patterns of films grown at high temperatures (673 and 723 K) suggests the presence of spherical voids. The pore size distribution function determined from the isotropic patterns indicates a multimodal size distribution. on the other hand, the measured mass density of the doped films with isotropic nanotexture is higher than that of the anisotropic films while the electric resistivity is significantly lower. This is in agreement with the detected strong reduction of the void density and specific surface area at approximately constant pore size.

Prospective Evaluation of Laparoscopic Pancreatic Biopsies in 11 Healthy Cats

BackgroundDefinitive diagnosis of feline pancreatic disease is dependent on histologic examination of biopsies.HypothesisLaparoscopic punch biopsy of the pancreas does not significantly affect pancreatic health or clinical status of healthy cats, and provides an adequate biopsy sample for histopathology.AnimalsEleven healthy female domestic shorthair cats.MethodsEffects of laparoscopic pancreatic visualization alone in 5 cats compared with laparoscopic pancreatic visualization and punch biopsy in 6 cats were studied. Temperature, pulse, and respiratory rate, physical examination, and daily caloric intake were evaluated for 1 week before and 1 week after the procedure. Pain scores (simple descriptive score and dynamic interactive visual assessment score) were evaluated hourly during the 1st 6 hours postprocedure. Complete blood cell counts, serum biochemical profiles, serum feline pancreatic lipase immunoreactivity, and urine specific gravity were evaluated before the procedure and at 6, 24, and 72 hours postprocedure. One month postprocedure, during sterilization, the pancreas was reassessed visually in all cats, and microscopically in the biopsy group.ResultsFor all variables evaluated, there were no significant differences between biopsy and control cats. Re-evaluation of the pancreatic biopsy site 1 month later documented a normal tissue response to biopsy. The laparoscopic punch biopsy forceps provided high-quality pancreatic biopsy samples with an average size of 5 mm x 4 mm on 2-dimensional cut section.Conclusions and Clinical ImportanceLaparoscopic pancreatic biopsy is a useful and safe technique in healthy cats.

Farelo de trigo e complexo enzimático na alimentação de poedeiras semipesadas na fase de produção

The study was carried out with the objective to evaluate the effects of the inclusion of the wheat bran (WB) with or without supplementation of an enzymatic complex (EC) on the performance of semi-heavy hens in the egg-production phase. A total of 288 Lohmann Brown pullets were used, distributed to a completely randomized design in 4 x 2 factorial arrangement, composed by four WB levels (0, 3, 6 and 9%) in the ration and enzymatic complex supplementation (0 or 100g/100 kg diet), with eight treatments and six replicates of six birds. The enzymatic complex contained the enzymes beta-galactosidase, galactomananase, xilanase and alpha-glucanase. Feed intake, final body weight, egg production, egg weight, egg mass, egg mass feed conversion or egg dozen feed conversion was not affected by WB inclusion in the diets. Egg shell specific gravity deteriorated as WB levels increase in the diets. None of the characteristics was affected by the enzymatic complex supplementation, except for egg weight, that improved from 62.74 to 64.28 g. Then, the use up to 9.0% of wheat bran in the ration is recommended for semi-heavily chickens in the production phase. The supplementation of alpha-galactosidase, galactomannanase, xylanase and alpha-glucanase improve egg weight.

Confronting particle emission scenarios with strangeness data

We show that a hadron gas model with continuous particle emission instead of freeze-out may solve some of the problems (high values of the freeze-out density and specific net charge) that one encounters in the latter case when studying strange particle ratios such as those from the experiment WA85. This underlines the necessity to understand better particle emission in hydrodynamics to be able to analyze data. It also reopens the possibility of a quark-hadron transition occurring with phase equilibrium instead of explosively.

Variação da massa específica da madeira de Eucalyptus grandis aos 8 anos de idade em função de diferentes níveis de produtividade

It were analyzed Eucalyptus grandis trees of 8 years old in the forest group of Duraflora S/A, with different annual increments based on volume, to the related studies of specific gravity values based on productivity indexes. The methodology used in analysis of specific gravity was the gamma-ray attenuation technique of Americium-241. The Eucalyptus grandis showed a specific gravity decreasing with the increasing of parcel productivity. For a gain of 3,5 m3 in productivity there was a decreasing of 1% in specific gravity. Nevertheless, it was not observed correlation between specific gravity and basal area in a same parcel. The present work stands out too, some of the difficulties found with relation to wood specific gravity determinations and emphasize the importance of take samples in the form of full rounded plates in three or four relative positions in the tree.

Energy and angular momentum of the gravitational field in the teleparallel geometry

The Hamiltonian formulation of the teleparallel equivalent of general relativity is considered. Definitions of energy, momentum and angular momentum of the gravitational field arise from the integral form of the constraint equations of the theory. In particular, the gravitational energy-momentum is given by the integral of scalar densities over a three-dimensional spacelike hypersurface. The definition for the gravitational energy is investigated in the context of the Kerr black hole. In the evaluation of the energy contained within the external event horizon of the Kerr black hole, we obtain a value strikingly close to the irreducible mass of the latter. The gravitational angular momentum is evaluated for the gravitational field of a thin, slowly rotating mass shell. © 2002 The American Physical Society.

Thermodynamic response of an ultrasonic densitometer

An ultrasonic densitometer is experimentally characterized as a function of temperature. The measurement of propagation velocity and density of several liquids is performed in the 15 to 40°C temperature range. Results are compared to tabulated values in the case of distilled water, showing accuracy of 0.07% for the propagation velocity. Density values are compared to those obtained with a pycnometer, showing 0.2% accuracy in density measurement for stabilized temperature and 0.4% under thermal gradient conditions.

Densidade das células do endotélio corneano em olhos de cães à microscopia especular

The aim of this study was to examine the endothelial surface and to perform a morphometric analysis of the corneal endothelial cells in normal eyes of dogs using specular microscopy. Morphometric analysis with regard mean cell area and cell density was performed. Both eyes of ten mixed-breed, males and females, with 6 years of age, weighing about 15 kg euthanatized for reasons unrelated to this study were evaluated. Eyes were examined to determine that they did not have visible ocular disease and transported to the laboratory in moist chamber. Using a contact specular microscope the corneal endothelium was examined. Three images of the central corneal endothelium of each eye were obtained. The mean cell area and the cell density of the corneal endothelial cells were obtained using software for corneal endothelium analysis and density measurement. The mean cell area was 395 ± 36 μm 2 and the endothelial cell density was 2555 ± 240 cells/mm2. The present work demonstrates that the normal corneal endothelium of dog is similar to those described in human.

Ultrasonic material characterization using diffraction-free PVDF receivers

This work describes the use of a large aperture PVDF receiver in the measurement of density of liquids and elastic constants of composite materials. The density measurement of several liquids is obtained with the accuracy of less than 0.2% using a conventional NDT emitter transducer and a 70-mm diameter, 52-μm P(VDF-TrFE) membrane with gold electrodes. The determination of the elastic constants of composite materials is based in the measurement of phase velocity. It is shown that the diffraction can lead to errors around 1% in the velocity measurement when using a pair of ultrasonic transducers (1MHz and 19mm diameter) operating in transmission-reception mode separated by a distance of 100 mm. This effect is negligible when using a pair of 10-MHz transducers. On the other hand, the dispersion at 10 MHz can result in errors of about 0.5%, measuring the velocity in composite materials. The use of an 80-mm diameter, 52-μm thick PVDF membrane receiver allows measuring the phase velocity without the diffraction effects.

Avaliação da técnica de dopplerfluxometria e índice de resistividade das artérias renais em cadelas com piometra

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características epidemiológicas, clínicas e laboratoriais de gatos com sinais de trato urinário inferior

Pós-graduação em Medicina Veterinária - FCAV

Comparação entre três critérios de amostragem para a avaliação da densidade básica da madeira de florestas implantadas de eucaliptos

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Desempenho do stellite como material de ferramenta no serramento da madeira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estresse oxidativo, produção de superóxido e a apoptose de neutrófilos de cães com insuficiência renal crônica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)