Survey of the nutritional recommendations and management practices adopted by feedlot cattle nutritionists in Brazil

Thirty-three feedlot cattle nutritionists were surveyed to evaluate the management practices and nutritional recommendations adopted by feedlots in Brazil. The web-based survey consisted of 81 questions that included: general information (n = 10); general commodity information (n = 15); use of coproducts (n = 5), roughage source and level (n = 5); adaptation methods (n = 7); feed mixers (n = 6); feeding management (n = 6); cattle management and type of cattle fed (n = 13); formulation practices (n = 9); information resources used for nutritional recommendations (n = 2); and additional questions (n = 3). In total, the 33 nutritionists were responsible for approximately 2,658,000 animals, and moreover, 65.5% of those participants had clients that feed less than 5000 animals yearly. Corn was the primary source of grain used in feedlot diets (87.9%) and cracking was the primary processing method recommended by nutritionists (57.6%). The average concentrate and roughage inclusion in finishing diets was 79.0% and 21.0%, respectively. The main challenges faced by nutritionists are the lack of available and precise equipment and lack of trained employees with respiratory diseases as the main health problem. This survey of nutrition and management practices should aid in the development of research for the feedlot industry in Brazil and similar tropical climates, as well as provide data to facilitate the broader application of future NRC models. (C) 2014 Elsevier B.V. All rights reserved.

Aplicação de métodos computacionais no estudo das fases intermetálicas ordenadas pt-sn

Fuel cells are a very promising solution to the problems of power generation and emission of pollutant to the environment, excellent to be used in stationary application and mobile application too. The high cost of production of these devices, mainly due to the use of noble metals as anode, is a major obstacle to massive production and deployment of this technology, however the use of intermetallic phases of platinum combined with other metals less noble has been evaluated as electrodes in order to minimize production costs and still being able to significantly improve the catalytic performance of the anode. The study of intermetallic phases, exclusively done by experimental techniques is not complete and demand that other methods need to be applied to a deeper understanding of the behavior geometric properties and the electronic structure of the material, to this end the use of computer simulation methods, which have proved appropriate for a broader understanding of the geometric and electronic properties of the materials involved, so far not so well understood.. The use of computational methods provides answers to explain the behavior of the materials and allows assessing whether the intermetallic may be a good electrode. In this research project was used the Quantum-ESPRESSO package, based on the DFT theory, which provides the self-consistent field calculations with great precision, calculations of the periodic systems interatomic force, and other post-processing calculations that points to a knowledge of the geometric and electronic properties of materials, which may be related to other properties of them, even the electrocatalytic. The electronic structure is determined from the optimized geometric structure of materials by analyzing the density of states (DOS) projected onto atomic orbital, which determines the influence of the electrocatalytic properties of the material... (Complete abstract click electronic access below)

Produção e avaliação da estabilidade de enzimas fúngicas

As enzimas estão presentes em todas as células vivas, onde exercem a função de catalisadores das reações que compõem as vias catabólicas e anabólicas do metabolismo celular. Esses biocatalisadores são moléculas de proteínas e seu poder catalítico está associado à conformação nativa, que depende de condições específicas de pH, temperatura e força iônica do meio. Os micro-organismos são bastante atrativos para a indústria, pois possibilitam a produção de enzimas por processos fermentativos em larga escala com regularidade necessária e simplicidade na requisição nutricional. Assim, embora alguns biocatalisadores sejam extraídos de tecidos animais e vegetais, as enzimas industriais são, em sua maior parte, obtidas a partir de micro-organismos. Este trabalho teve como objetivo a produção das enzimas lipase e β-glucanase a partir dos fungos Aspergillus niger e Trichoderma reesei, respectivamente, em diferentes meios de cultura, para determinar as condições de maior produção da enzima em questão. As enzimas produzidas em agitador orbital foram obtidas a partir da filtração do produto da fermentação, precipitação com sulfato de amônio e liofilização. Após a produção e precipitação a atividade das enzimas e a concentração de proteínas foram quantificadas, os parâmetros cinéticos foram determinados frente a diferentes pHs, temperaturas e força iônica do meio. A lipase apresentou melhor atividade a 30°C e em pH 6,0. A presença dos íons Mg2+ e Zn2+ levaram a um aumento na atividade da enzima. A β-glucanase apresentou maiores atividades quando submetidas a 37°C e pH 5,0. Os íons Mg2+, Cu2+ e Ca2+ induziram melhor a atividade enzimática.

Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6

Pós-graduação em Engenharia Mecânica - FEB

Síntese de tetra-hidropiridinas por meio de reações multicomponentes

Multicomponent Reactions are defined as reactions between three or more reagents in a single reaction step in the same reaction vial, forming a product that includes the majority of atoms and structural characteristics of the reagents. Thus these reactions save time and energy. One of the ways to improve the yield and reaction time of a multicomponent reaction is to use different catalysts, an example of catalyst that shows great potential and has been studied in recent years is the molecular iodine is known to be a Lewis acid with high catalytic power. The functionalized piperidines, also known as tetrahydropyridines, are alkaloids that have pharmacological potential, this is due to the piperidine ring present in many natural product structures with muscarinic activity, nicotine, analgesic, antipsychotic, anti-proliferative, among others. In this paper we describe studies about on the application of molecular iodine (I2) in the multicomponent reaction between aniline derivatives, benzaldehyde and β-ketoester (methyl acetoacetate) for the synthesis of functionalized piperidines and the synthesis of a corresponding piperidone by acid hydrolysis. Data analysis allowed us to demonstrate the efficacy of molecular iodine in the synthesis of functionalized piperidines, obtaining results with yields 44-87% and short reaction time of 8 to 24 hours, and the efficacy of acid hydrolysis of enamine in the structure of the tetrahydropyridine derivative in a yield of 81%

Caracterização de estruturas de óxido de estanho modificado como sensores de gases

Pós-graduação em Química - IQ

Desenvolvimento de sensores eletroquímicos e métodos de extração em fase sólida baseados em sistemas biomiméticos para análise de poluentes ambientais

Pós-graduação em Química - IQ

Análise estrutural de tubos de concreto armado com resíduo de borracha de pneu

Pós-graduação em Engenharia Civil - FEIS

Implementation of physiotherapeutic shares in the prevention of diabetes complications in a Family Health Strategy

Introduction In the Family Health Strategy (FHS), the treatment of Diabetes Mellitus (DM) includes education and lifestyle change strategies. Physiotherapists have a key role in this health setting. Objectives To implement actions of evaluation and guidelines for patients with type 2 DM who attend a Family Health Strategy (FHS), regarding diabetic foot and the practice of regular physical exercise in the control and prevention of the complications of Diabetes Mellitus. Methods 17 individuals from an FHS were evaluated, with the following procedures: clinical and anthropometric parameters, inspection, a questionnaire on diabetic neuropathy, tests of vibratory and tactile sensitivity, muscle function, range of motion, functional analysis, questions about exercise practice and guidance regarding controlling blood glucose and foot care. Results Deformities, dry skin, calluses, dehydration, ulceration, cracking and brittle nails were found. Peripheral neuropathy was not observed; tactile sensitivity was altered in the heel region and the vibratory sense was absent in 5% of individuals. A decrease in functionality of ankle movements was verified. Of the participants, 76% were sedentary, 24% knew about the benefits of practicing regular exercise, 25% had undergone a medical evaluation prior to performing physical exercise and, of these, 25% were supervised by a qualified professional. Discussion The implementation of physiotherapy actions in diabetics from an FHS was important for highlighting the presence of risk factors for diabetic complications. Conclusions Individuals attending the FHS need more information and programs for the prevention of diabetic complications.

Confiabilidade de coroas com infraestrutura em zircônia sob fadiga deslizante: efeito do tipo de tratamento interno para cimentação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Probabilidade de falha de coroas com infraestrutura em zircônia com diferentes geometrias

Pós-graduação em Odontologia Restauradora - ICT

Nanozeólitas como suportes sólidos para imobilização enzimática: Síntese, caracterização de complexos nanozeólitas/enzimas e sua aplicação como catalisadores heterogêneos para produção de biodiesel via rota etílica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tar reduction in downdraft biomass gasifier using a primary method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synthesis and characterization of polyarylacetylene for use in the monolithic vitreous carbon processing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simulação computacional por elementos finitos de múltiplas fissuras em sólidos usando técnica de fragmentação da malha

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)