Cotton leaf gas exchange responses to irradiance and leaf aging

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Study of ceramic block manufacture with the addition of waste from iron ore extraction

This work is intended to study the possibility of adding an amount of waste from iron mining in the ceramic mass. Clay and coal, from Vale do Paraiba, Sao Paulo, Brazil, were used in this research. These raw materials are used in the ceramic block manufacture. Clay and waste were analyzed by X-ray fluorescence and X-ray diffraction, particle size, differential thermal and thermogravimetric analysis. Liquid limit and plasticity index tests were performed in order to determine the amount of waste that which should be used in the ceramic mass. After determining the amount of waste, all samples were uniaxially pressed and sintered at 900 degrees C. Surface roughness measurements, apparent porosity and bulk density technique and three-point flexural tests were also performed to characterize the samples. The results showed that by adding the exact amount of waste, which was determined by the essays, it is possible to manufacture solid bricks.

Transgenic cotton-fed Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) affects the parasitoid encarsia desantisi Viggiani (Hymenoptera: Aphelinidae) development

Cotton cultivars expressing Cry proteins are widely used to control lepidopteran pests. The effects of transgenic plants containing insecticidal Cry proteins on non-target species must be comprehended for a better and rational use of this technology for pest management. We investigated the influence of the Bt cotton cultivars NuOPAL and FM 975 on biological parameters of Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae), a non-target pest of Bt cotton cultivars and on its parasitoid Encarsia desantisi Viggiani (Hymenoptera: Aphelinidae). The experiments were conducted in a climatized room, and the non-transgenic near isolines were used for rearing whiteflies as control hosts. The effects of the Bt cotton cultivars on the period of embryonic and larval development and the percentage of adult emergence of B. tabaci were assessed. The period required for embryonic, larval, and pupal development and the percentage of emergence and longevity of E. desantisi females were determined using Bt cotton-fed and non-Bt cotton-fed B. tabaci as hosts. Both Bt cotton cultivars resulted in a decrease of approximately 20% of adult emergence of B. tabaci. Differently, an increase of approximately 10% of adult emergence of E. desantisi was observed for parasitoids that used hosts fed with both Bt cotton cultivars. However, female parasitoid longevity decreased when their hosts were fed on Bt cotton cultivars. Our data suggest that the use of Bt cotton cultivars in association with the biological control agent E. desantisi could be functional for the management of B. tabaci in Bt cotton crops.

Behavior of Orius insidiosus preying on Aphis gossypii reared on transgenic and conventional cotton varieties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Greening a Brazilian cotton seed processing company: from challenges to strategic opportunities

This paper aims to shed light on a current and important theme that has been gaining increasing importance for governments, society and companies: the greening of agricultural companies in developing countries. The research objective is to classify a Brazilian cotton seed processing company in the evolutionary stages of environmental management: reactive, preventive or proactive. Design/methodology/approach– A case study was conducted in a Brazilian cotton seed processing company.Findings– The main results are: the studied company is positioned in the preventive stage of environmental management; this company is investing in operational green practices; environmental management in this company is motivated by various factors aiming at an increased competitive advantage. Finally, it can be concluded that this company is looking for green opportunities towards the proactive environmental management stage.

Verification of applicability of the polyurethane adhesive based on castor oil in the manufacture of glued laminated bamboo

The current concern with the environment promotes the development of new technologies for production with use of alternative materials, from renewable resources, and changes in production processes, having as main objective the reduction of environmental impact. One of the alternatives for cleaner production is the use of castor oil derivatives instead of non-renewable sources, such as adhesives based on PVA (polyvinyl acetate), applied in the manufacturing process of glued laminated bamboo. Based on the versatility of the bamboo laminate and the castor oil, and from the perspective of sustainability, this study aims to contribute to the application of new materials and processes, used in the manufacturing industry, by proposing the use of the polyurethane adhesive based on castor oil for glued laminated bamboo manufacturing, which can later be used in the manufacture of several products. To verify the applicability of the polyurethane adhesive based on castor oil in the glued laminated bamboo manufacture, mechanical tests of traction and shearing of the glue sheet were performed in specimens of the said material, and the results were compared with the Cascorez 2590 and Waterbond adhesives. The results showed that the polyurethane adhesive based on castor oil, in the traction test, has superior performance than the Waterbond adhesive and slightly below than the Cascorez 2590 adhesive, but in the shear test, the polyurethane adhesive based on castor oil presented a slightly inferior performance than the other two adhesives used in the comparison.

Nitrogen immobilization by Congo grass roots impairs cotton initial growth

In crop-livestock integration systems the presence of both grass roots in the soil and straw on the surface can temporarily immobilize nitrogen. This study examined the persistence of grass residues in the system as well as their effects on cotton response to N when grown after Congo grass (Brachiaria ruziziensis, Syn. Urochloa ruziziensis). Congo grass was grown in pots with soil. Next, cotton was grown in the same pots without residues, with whole plant residues (Congo grass roots and shoots) or root residues (grass roots) and fertilized with N as ammonium nitrate. Congo grass and cotton roots were separated using stable carbon isotope fractioning. Congo grass roots showed higher C/N ratio than shoots, losing 14% of its mass after 45 days and increasing soil N immobilization. The lower N availability resulted in N deficient and shorter cotton plants with lower dry matter yields. Nevertheless, the application of 80 to 120 mg kg-1 of N compensated the immobilization by the soil microorganisms, allowing cotton to show normal growth. When Congo grass is present in the cropping system, the effects of the decaying roots on soil N dynamics and availability are more important than those of the straw left on the soil surface.