The structural origin and biological function of pH-sensitivity in firefly luciferases

Firefly luciferases are called pH-sensitive because their bioluminescence spectra display a typical red-shift at acidic pH, higher temperatures, and in the presence of heavy metal cations, whereas other beetle luciferases (click beetles and railroadworms) do not, and for this reason they are called pH-insensitive. Despite many studies on firefly luciferases, the origin of pH-sensitivity is far from being understood. This subject is revised in view of recent results. Some substitutions of amino-acid residues influencing pH-sensitivity in firefly luciferases have been identified. Sequence comparison, site-directed mutagenesis and modeling studies have shown a set of residues differing between pH-sensitive and pH-insensitive luciferases which affect bioluminescence colors. Some substitutions dramatically affecting bioluminescence colors in both groups of luciferases are clustered in the loop between residues 223-235 (Photinus pyralis sequence). A network of hydrogen bonds and salt bridges involving the residues N229-S284-E311-R337 was found to be important for affecting bioluminescence colors. It is suggested that these structural elements may affect the benzothiazolyl side of the luciferin-binding site affecting bioluminescence colors. Experimental evidence suggest that the residual red light emission in pH-sensitive luciferases could be a vestige that may have biological importance in some firefly species. Furthermore, the potential utility of pH-sensitivity for intracellular biosensing applications is considered. © The Royal Society of Chemistry and Owner Societies.

Root volume and dry matter of peanut plants as a function of soil bulk density and soil water stress

Soil compaction may be defined as the pressing of soil to make it denser. Soil compaction makes the soil denser, decreases permeability of gas and water exchange as well as alterations in thermal relations, and increases mechanical strength of the soil. Compacted soil can restrict normal root development. Simulations of the root restricting layers in a greenhouse are necessary to develop a mechanism to alleviate soil compaction problems in these soils. The selection of three distinct bulk densities based on the standard proctor test is also an important factor to determine which bulk density restricts the root layer. This experiment aimed to assess peanut (Arachis hypogea) root volume and root dry matter as a function of bulk density and water stress. Three levels of soil density (1.2, 1.4, and 1.6g cm-3), and two levels of the soil water content (70 and 90% of field capacity) were used. Treatments were arranged as completely randomized design, with four replications in a 3×2 factorial scheme. The result showed that peanut yield generally responded favorably to subsurface compaction in the presence of high mechanical impedance. This clearly indicates the ability of this root to penetrate the hardpan with less stress. Root volume was not affected by increase in soil bulk density and this mechanical impedance increased root volume when roots penetrated the barrier with less energy. Root growth below the compacted layer (hardpan), was impaired by the imposed barrier. This stress made it impossible for roots to grow well even in the presence of optimum soil water content. Generally soil water content of 70% field capacity (P<0.0001) enhanced greater root proliferation. Nonetheless, soil water content of 90% field capacity in some occasions proved better for root growth. Some of the discrepancies observed were that mechanical impedance is not a good indicator for measuring root growth restriction in greenhouse. Future research can be done using more levels of water to determine the lowest soil water level, which can inhibit plant growth.

Cotton root volume and root dry matter as function of high soil bulk density and soil water stress

Soil compaction reduces root growth, affecting the yield, especially in the Southern Coastal Plain of the USA. Simulations of the root restricting layers in greenhouses are necessary to develop mechanisms which alleviate soil compaction problems. The selection of three distinct bulk densities based on the Standard Proctor Test is also an important factor to determine which bulk density restricts root penetration. This experiment was conducted to evaluate cotton (Gossypium hirsutum L.) root volume and root dry matter as a function of soil bulk density and water stress. Three levels of soil density (1.2, 1.4, and 1.6 g cm-3), and two levels of water content (70 and 90% of field capacity) were used. A completely randomized design with four replicates in a 3×2 factorial pattern was used. The results showed that mechanical impedance affected root volume positively with soil bulk density of 1.2 and 1.6 g cm-3, enhancing root growth (P>0.0064). Soil water content reduced root growth as root and shoot growth was higher at 70% field capacity than that at 90% field capacity. Shoot growth was not affected by the increase in soil bulk density and this result suggests that soil bulk density is not a good indicator for measuring mechanical impedance in some soils.

A comparative study of the damping oscillation function of TCSC and UPFC

The main objective of this work is to analyze the ability of FACTS devices like TCSC and UPFC to damp low frequency oscillations and a POD controller is also included. A comparative study of damping effect of those devices IS carried out. The Power Sensitivity Model (PSM) is used to the representation of the electric power system. Sensibility analysis using the residue method shows the best place for the installation of FACTS and the procedure to determine POD parameters. ©2008 IEEE.

Micromechanics of dentin/adhesive interface in function of dentin depth: 3d finite element analysis

Objectives: The aim of this study was to analyze the stress distribution on dentin/adhesive interface (d/a) through a 3-D finite element analysis (FEA) varying the number and diameter of the dentin tubules orifice according to dentin depth, keeping hybrid layer (HL) thickness and TAǴs length constant. Materials and Methods: 3 models were built through the SolidWorks software: SD - specimen simulating superficial dentin (41 x 41 x 82 μm), with a 3 μm thick HL, a 17 μm length Tag, and 8 tubules with a 0.9 μm diameter restored with composite resin. MD - similar to M1 with 12 tubules with a 1.2 μm diameter, simulating medium dentin. DD - similar to M1 with 16 tubules with a 2.5 μm diameter, simulating deep dentin. Other two models were built in order to keep the diameter constant in 2.5 μm: MS - similar to SD with 8 tubules; and MM - similar to MD with 12 tubules. The boundary condition was applied to the base surface of each specimen. Tensile load (0.03N) was performed on the composite resin top surface. Stress field (maximum principal stress in tension - σMAX) was performed using Ansys Wokbench 10.0. Results: The peak of σMAX (MPa) were similar between SD (110) and MD (106), and higher for DD (134). The stress distribution pathway was similar for all models, starting from peritubular dentin to adhesive layer, intertubular dentin and hybrid layer. The peak of σMAX (MPa) for those structures was, respectively: 134 (DD), 56.9 (SD), 45.5 (DD), and 36.7 (MD). Conclusions: The number of dentin tubules had no influence in the σMAX at the dentin/adhesive interface. Peritubular and intertubular dentin showed higher stress with the bigger dentin tubules orifice condition. The σMAX in the hybrid layer and adhesive layer were going down from superficial dentin to deeper dentin. In a failure scenario, the hybrid layer in contact with peritubular dentin and adhesive layer is the first region for breaking the adhesion. © 2011 Nova Science Publishers, Inc.

Productivity characteristics of endive as a function of spacing

Endive (Cichorium intybus) is one of the vegetables least studied in Brazil with respect to the behavior of the most commercialized cultivars, but it is known that the number of plants per area is one of the factors that most influences the productivity of various crops. Thus, the objective of this work was to evaluate the behavior of endive using four spacings between rows and five spacings between plants, in the region of Jaboticabal-SP. The experiment was conducted in the field in the period of August 12, 2008 to November 6, 2008, in the experimental area of the Sector of Vegetable Crops and Aromatic-Medicinal Plants, Department of Crop Sciences, School of Agricultural and Veterinary Sciences - UNESP-FCAV. The experimental design utilized was a randomized block design with a 4 × 5 factorial scheme, i.e., four spacings between rows (0.15, 0.20, 0.25 and 0.30 m) and five spacings between plants (0.10, 0.15, 0.20, 0.25 and 0.30 m), with three repetitions. The endive cultivar studied was 'Pão-de-Acucar', obtained from the company Tecnoseed. Seedlings were established utilizing the sowing system in 200-cell Styrofoam trays containing the substrate Plantmax Vegetables® HA. The seedlings were transplanted at 37 days after planting. After harvesting, the following characteristics were determined: height (cm), diameter of the plant in rows (cm), diameter of the plant in between rows (cm), number of leaves, fresh weight (g) and total estimated productivity (t/ha). There were no interactions between the factors studied. Based on the data, we conclude that spacings of 0.15 m between rows and of 0.15 m between plants produce plants of higher quality and with greater productivity.

Possible mechanism by which zinc protects the testicular function of rats exposed to cigarette smoke

Background: The aim of this study was to evaluate the changes in testicular function of rats due to cigarette smoke exposure and the possible mechanism by which zinc protects against these alterations. Methods: MaleWistar rats (60 days old) were randomly divided into 3 groups: control (G1, n = 10); exposed to cigarette smoke (G2, n = 10; 20 cigarettes/day/9 weeks) and exposed to cigarette smoke and supplemented with zinc (G3, n = 8; 20 cigarettes/day/9 weeks; 20 mg/kg zinc chloride daily for 9 weeks, by gavage). After the treatment period, the animals were euthanized, and materials were collected for analyses. Results: G2 rats showed a reduction in body mass; impaired sperm concentration, motility, morphology and vitality; and increased malonaldehyde and thiol group levels and superoxide dismutase activity as compared to G1. Zinc prevented the reduction of sperm concentration and the excessive increase of lipid peroxidation and induced an increase in plasma testosterone levels, wet weight of testis and thiol group concentration. Conclusions: Exposure to cigarette smoke led to harmful effects on testicular function at least partially due to the exacerbation of oxidative stress. Supplementary zinc had an important modulator/protector effect on certain parameters. The mechanism of zinc protection can be through an increase of SH concentration. Thus, zinc supplementation may be a promising addition to conventional treatments for male infertility related to smoking. Copyright © 2012 by Institute of Pharmacology Polish Academy of Sciences.

AMMONIUM AND NITRATE IN SOIL AND RATOON SUGARCANE GROWN IN FUNCTION OF NITROGEN ON OXISOL

After harvest, sugarcane residues left on the soil surface can alter nitrogen (N) dynamics in the plant-soil system. In Oxisols, the nitrogen fertilizer applied had its effects on the levels of ammonium and nitrate in the soil, N concentration in the plant leaves, and on the growth and productivity of second ratoon plants. The N rates tested were of 0, 60, 120, 180, and 240 kg ha-1. Each treatment was replicated four times. Four months after the experiment was started, ammonium and nitrate concentration in the soil, N levels in plant leaves, and plant growth were evaluated. Productivity was evaluated 11 months after the experiment was set. By increasing the content of mineral N in soil, plant growth variables reflected differences in the production of stems; however, it did not affect foliar N. The use of leaf analysis was not important to assess the nutritional status of nitrogen in the ratoon sugarcane. Nitrogen concentration in soil was affected by nitrogen fertilization, but not the N content in leaves. The rate of 138 kg N ha-1enabled greater production of sugarcane stalks (140 t ha-1). © 2013 Copyright Taylor and Francis Group, LLC.

Thermophysical properties of cotton, canola, sunflower and soybean oils as a function of temperature

Vegetable oils are used in the industry of processed food, including deep-fat frying. This work determined data on the thermophysical properties of cotton, canola, sunflower, corn, and soybean oils. Thermal conductivity, heat capacity, density, and viscosity were measured within the temperature range of 299.15-433.15 K. The data showed that the temperature influenced the thermophysical properties of the oils studied. The developed correlations could be used to predict these properties within the range of temperatures studied. © 2013 Copyright Taylor and Francis Group, LLC.

Energetic efficiency of an agricultural tractor in function of tire inflation pressure

The tire inflation pressure, among other factors, determines the efficiency in which a tractor can exert traction. It was studied the effect of using two tire inflation pressures, 110.4 kPa in the front and rear wheels, 124.2 kPa in the front wheel and 138 kPa in the rear wheels, the energetic efficiency of an agricultural tractor of 147 kW of engine power, in the displacement speed of 6.0 km.h-1, on track with firm surface, with the tractor engine speed of 2000 rpm. For each condition of the tire pressure, the tested tractor was subjected to constant forces in the drawbar of 45 kN and 50 kN, covering 30 meters. It was used a randomized complete block with a 2x2 factorial arrangement (tire pressure and drawbar power) with four replications, totaling 16 experimental units. Data were subjected to analysis of variance, using the Tukey test at 5% probability for comparison averages. The lowest hourly and specific fuel consumption, the lowest slippage of the wheelsets and the highest efficiency in the drawbar was obtained with the tire inflation pressure of 110.4 kPa in the front and rear tires of the tractor, highlighting that lower pressures improve energetic and operational performance of the tractor.

Chemical control of morning glory as a function of water restriction levels

Among the herbicides recommended for the dry season and registered to sugarcane crop, amicarbazone, isoxaflutole and the association diuron + hexazinone + sulfomethuron-methyl can be highlighted. These are pre-emergence herbicides efficient against broad-leaved weeds. Morning glory causes large losses in infested sugarcane fields by bending the stalks and interfering in harvesting. In this study the effectiveness of pre-emergence herbicides for two species of morning glory (Ipomoea hederifolia and Ipomoea grandifolia) was evaluated. Treatments were arranged in completely randomized factorial design (4 x 7). There were four periods of water restriction (0, 30, 60 and 90 days), seven chemical treatments [diuron + hexazinone + sulfometuron-methyl (1387 + 391 + 33.35 g a.i. ha-1), diuron + hexazinone + sulfometuron-methyl (1507.5 + 425 + 36.25 g a.i. ha-1), diuron + hexazinone + sulfometuron-methyl (1658.25 + 467.5 + 39.87 g a.i. ha-1), diuron + hexazinone + sulfometuron­methyl (1809 + 510 + 43.5 g a.i. ha-1), amicarbazone (1190 g a.i. ha-1), amicarbazone + isoxaflutole (840 + 82.5 g a.i. ha-1)] and a control with no application. At 7, 14, 21 and 28 days after the restoration of moisture, control was visually evaluated. After the final evaluation, the dry mass of morning glories was measured. At 90 days of water restriction, diuron + hexazinone + sulfometuron-methyl was more effective to control I. hederifolia than the amicarbazone + isoxaflutole tank mixture. The four diuron + hexazinone + sulfometuron­methyl doses have reduced morning glory dry mass to zero; whereas treatments with amicarbazone have not. The most effective treatment for morning glory control was diuron + hexazinone + sulfometuron-methyl. This result may be due to a possible synergistic interaction.

Nonsteroidal anti-inflammatory therapy: changes on renal function of healthy dogs

PURPOSE: To evaluate the renal function in healthy dogs submitted to nonselective and preferential COX-2 nonsteroidal anti-inflammatory drug (NSAID) therapy. METHODS: Twenty four healthy dogs were distributed into four groups (G) (n=6): ketoprofenG - treated with ketoprofen; nimesulideG - treated with nimesulid; meloxicanG - treated with meloxican; and etodolacG - treated with etodolaco. All the dogs received the NSAIDs for 10 days by oral route. Physical examination and renal function (urinalysis, urinary sodium and gamma-glutamyl transpeptidase (GGT), serum urea, creatinine, potassium and sodium, and endogenous creatinine clearance) were evaluated before, after five and ten days (T0, T5 and T10) of the treatment in all groups. RESULTS: Changes were observed in urinalysis, with a significant increase in renal cells in the urine at T5 and T10 in nimesulideG. Significant reduction in urinary sodium in nimesulideG at T5 was observed. The clearance values were lower in ketoprofenG at T10. CONCLUSIONS: Meloxicam and etodolac were the drugs that have proven to be safer for short-term therapy in healthy dogs in relation to renal function. NSAIDs ketoprofen and nimesulide should be used judiciously in dogs with renal dysfunction, since there are promoted changes in renal function.

Intraspecific variability of Holostylis reniformis: concentration of lignans, as determined by maceration and supercritical fluid extraction (SFE-CO2), as a function of plant provenance and plant parts

Maceration and supercritical fluid extraction were used to prepare extracts from parts of plants (Holostylis reniformis) collected in two different regions of Brazil. ¹H NMR, HPLC-DAD-ESI/MS, HPLC-DAD, GC-MS, and chemometric techniques were used to analyse lignans in the extracts and showed that yields of SFE-CO2 were less than or equal to those of hexane maceration extracts. These analyses, in conjunction with the concentrations of aliphatic hydrocarbons, fatty acids and their methyl and ethyl derivatives in the extracts, also allowed the chemical composition of parts and provenance of the plant to be differentiated.

Corn productivity in function of surface application of lime in differents management systems and cultural preparation

The evaluation of technologies employed at the agricultural production system such as crop rotation and soil preparation, both associated with crop-livestock integration, is crucial. Therefore, the aim of the present study was to evaluate the incorporation of lime for three no-tillage systems and cultural managements in system of crop-livestock integration, with emphasis on corn grain yield. The experiment was conducted from January 2003 to April 2005 at Selvíria city, MS, in Dystroferric Red Latosol, clay texture. The experimental design was randomized blocks with split plots consisted of three main treatments, aimed the soil physics conditioning and the incorporation of lime: PD - No-no-tillage; CM - minimum no-tillage, and PC - conventional no-tillage; and of two secondary treatments related to the management: rotation and crop succession, with four replications. Data on agronomic traits of maize were analyzed: plant height, stem diameter, height of the first spike insertion, 100 grains weight and grain yield. The results showed that the maize produced under the system of crop-livestock integration is quite feasible, showing that grain yields are comparable to averages in the region and the different soil physical conditioning and incorporation of lime did not influence the corn yield as well as the cultural managements, rotation and succession, did not affect the maize crop behavior after two years of cultivation.

Jet and underlying event properties as a function of charged-particle multiplicity in proton-proton collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)