Maturity degree of composts from municipal solid wastes evaluated by differential scanning calorimetry

Differential scanning calorimetry (DSC) in association with chemical analysis was applied to assess the maturity reached by the organic fraction of Municipal Solid Wastes (MSW) subjected to composting processes with manual and fixed aeration and sampled at different composting times. Thermograms showed that the difference in the treatments, i.e., the manual aeration and the fixed aeration, had no relevant effect on the stabilization and maturation of OM in the substrates. Common thermal effects observed were: a low temperature endotherm assigned to dehydration and/or loss of peripheral polysaccharides chains; a medium temperature exotherm assigned to loss of peptidic structures, and a high temperature exotherm assigned to oxydation and polycondensation of aromatic nuclei of the molecule. Results obtained suggest that in the experimental conditions used, a shorter time of composting (about 30 d) appears adequate, in order to limit the extended mineralization of OM, whereas a prolonged composting time (up to 132 d) would produce a compost of poor quality with high ash content and low OM content.

Produção de composto orgânico a partir de residuos de plantas medicinais

Extraction of active principles from medicinal plants generates wastes usually discharged. This process does not extract minerals from plant tissues, which may be considered of great value in organic composting. Wastes of 81 medicinal plant species processed at Centroflora/Anidro industry were analyzed for macro and micronutrients, and according to the results, three different ways to elaborate the compost were proposed: a) wastes of medicinal plants with high content of a specific mineral, aiming to fertilize soils where would be cultivated species that need high quantities of that mineral; b) wastes with mineral contents in order to support specific failures on mineral content of a soil; c) wastes of the eleven richest species in each nutrient that should elevate all mineral contents in soil.

Heavy metal nutrients in tomato plants cultivated in soil amended with biosolid composts

The use of biosolids in horticulture could contribute to recycle residues produced by men. This study analyzed concentrations of Cu, Mn and Zn in the compost during fermentation, in the soil amended with the composts and in the tomato plant materials. Five composts were produced using sugar-cane bagasse, biosolid and cattle manure in the proportions: 75-0-25; 75-12.5-12.5; 75-25-0; 50-50- 0 and 0-100-0 (composts with 0; 12.5; 25; 50 and 100% biosolid), respectively. These composts were used in an experiment with 6 treatments (the 5 composts and a control with mineral fertilization) in a design of randomized blocks with a split plot design. The control and the treatment of 0% biosolid received inorganic nitrogen. All the treatments received the same amount of N, P and K. Two tomato plants were cultivated in each 24 L pot, in a greenhouse at the Technology Department of the Faculdade de Ciências Agrárias e Veterinárias of the Universidade Estadual Paulista in Jaboticabal County, São Paulo State, Brazil. The concentrations of Cu, Mn and Zn were evaluated in the compost 7, 27, 57, 97 and 127 days after composting began, in the soil 0 and 164 days after the compost applied, and in the plants. Compost, soil and plant samples were subjected to digestion with HNO3, H 2O2 and HCl and the metals were determined by AAS. There were positive and significant correlations between Mn in the compost and Mn uptake by the plant (0.46 p>0.05), and between Zn in the compost and Zn concentration in the plant (0.78 p>0.05). Cu, Mn and Zn concentrations increased during composting. The biosolid in the compost supplied Cu and Zn to tomato plants, and the cattle manure supplied Mn to the plants.

Farming technology, biochemistry characterization, and protective effects of culinary-medicinal mushrooms Agaricus brasiliensis S. Wasser et al. and Lentinus edodes (Berk.) Singer: Five years of research in Brazil

The biotechnology, biochemical characterization, and protective effects of the himematsutake and shiitake mushrooms were studied for the Thematic Project, from 1998 to 2003. A new species, Agaricus Brasiliens is Wasser et al. (= A. blazei Murrill ss. Heinem.), was proposed for the cultivated lineages in Brazil. Interactions among lineages, substrates, casing layers, and fructification inductions (temperature alternations) significantly increased the productivity of A. brasiliensis in Brazil (from 40 g to 200 g of fresh mushroom kg -1 moist compost). However, pests and diseases (mainly Sciaridae flies and false truffle), drastically reduced the productivity of A. brasiliensis (below 50 g kg -1). Biochemically for each mushroom species, the polar extracts, no polars, and medium polarity presented the same organic substances; however, their concentrations differed as a result of the lineages, maturation of the fruit bodies, and cultivation conditions. In this aspect, concentration of linoleic acid in A. brasiliensis (added to animal food) was related directly to the chemical protection against carcinogenic drugs in mice. Aqueous extracts of Lentinus edodes (= Lentinula edodes (Berk.) Pegler) and A. brasiliensis may be preventive chemical protectors against mutagenic and carcinogenic drugs, depending on the lineage and extraction method (tea or juice). However, immunomodulator effects and tumor reduction were only observed with concentrated fractions (hexanic, methanolic, and ATF extracts). Aqueous extracts of A. brasiliensis and L. edodes have antibiotic-like substances and substances able to act as elicitors of resistance responses in some plants (local and systemic) and show a potential to be used in the alternative control of plant pathogens. © 2005 by Begell House, Inc.

Efeito de níveis de irrigação em substratos para a produção de mudas de ipê-roxo

The aim of this work was to evaluate the ipê-roxo (Tabebuia impetiginosa (Mart.) Standl). seedlings behavior in different substrates and irrigation levels and also study the use of urban waste compost in the substrates. The experiment was conducted in the agricultural engineering department at the Faculdade de Ciências Agrárias e Veterinárias - UNESP, Campus de Jaboticabal, SP. The experimental design used was the completely randomized with 30 treats and 2 replicates, in a 15× 2 factorial arrangement [15 substrates and 2 irrigation levels (100% and 150% of evapotranspiration)]. The substrates were composed by different material combinations: urban waste, Plantmax, tanned cattle manure, vermiculite and soil. For the study of the seedlings development, the following characteristics were evaluated: the seedlings height (H) and stem diameter (D). Evaluations (H and D) were made on 90, 105, 120, 135 and 150 days after sowing. The statistical analysis showed significant differences between the irrigation levels. According to the results, we can conclude that urban waste compost did not increase Blake development. For tested irrigation levels, the statistical analysis showed significant differences with better results for the 150% ET irrigation level compared to 100% ET.

O uso da serragem no processo de minicompostagem

In this work used four cylindrical PVC (polyvinyl chloride) mini compost bins, they all had the same size and were identical, with 40 cm diameter and 75 cm length, they also were opened on both sides. Each mini compost bean received 35,5 kg of solid organic wastes, which were previously crushed and 6 kg of sawdust. It was evaluated during the composting process the C/N analyses, temperature measurement, humidity and pH. Results showed that the use of sawdust as a source of high carbon inputs on the mini compost beans and using low quantities of organic solid wastes reached temperatures as high as 65° C, keeping on the thermophilic phase for almost 6 days. After 18 days the environmental temperature was reached, the organic wastes were then laid to reach full maturity for 55 more days. The C/N ratio was initially around 30/1 and after 73 days it was around 12/1.

Heavy metals availability and fractions in soil amended with biosolid composts

The heavy metals when linked to organic matter have a behavior in the soil that is still little known. This study aimed to evaluate the effect of sewage-sludge-based composts when incorporated in the soil, in relation to heavy metals availability. Five composts were incorporated using sugar-cane bagasse, sewage sludge and cattle manure in the respective proportions: 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 and 0-100-0 (composts with 0, 12.5, 25, 50 and 100% sewage sludge). The experiment consisted of 6 treatments (5 composts and a control with mineral fertilization) in randomized blocks with a split-plot design. The control and the treatment of 0% sewage sludge received inorganic nitrogen (N). All the treatments received the same amount of N (8.33 g) K (5.80 g) and K (8.11 g) per pot. Tomato plants were cultivated in 24.0 L pots in a greenhouse in Jaboticabal, SP, Brazil. The concentrations of heavy metals were determined in the soil samples at day 0 after compost incorporation. The higher the sewage sludge doses, the higher heavy metal contents in the soil. Among extractants, Melhlich-1 extracted the highest amount of heavy metals, while DTPA extracted the lowest one. The residual fraction presented the highest heavy metal content, followed by Fe oxides crystalline and amorphous to Cu, Cr and Mn, and Mn oxides, and Fe amorphous to Zn, indicating strong associations to oxides and clays. There were significant positive correlations between Mn contents in the plant and Mn linked to Fe oxide amorphous and crystalline.

Compostagem de resíduos sólidos de frigorífico

Composting has been a viable and efficient alternative treatment to agroindustrial waste. This experiment was installed with the objective of analyzing the process of composting for slaughterhouse waste. Twelve piles of composting were prepared, using slaughterhouse waste, wheat straw and wood sawdust. The process was evaluated by daily temperature monitoring, observations of the occurrence of undesirable parameters (bad smell and/or ammoniacal smell, grease formation and presence of grubs and flies), as well as the capacity of recycling nutrients. The undesirable parameters were observed, on average, for the first five days after pile building; the temperatures increased, reaching 70 °C; chemical composition of compost showed relevant contents of macro and micronutrients, a high recycling potential. Utilization of impermeable floor and roof are recommended during the composting. The turning frequency used (15 days after pile building followed by turning) was adequate. The best relation of weight was 7.2 kg of waste for each kg of straw and 16.6 kg of waste for each kg of sawdust.

Produção de agaricus blazei ss. Heinemann (A. brasiliensis) em função de diferentes camadas de cobertura e substratos de cultivo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Seedling growth of Schizolobium parahyba on different substrates and irrigation levels

The present study aimed to assess the behavior of seedlings of Schizolobium parahyba (Vell.) Blake growing on different substrates and irrigation levels, and to study the use of urban waste compost in substrates. The experiment was carried out in the College of Agricultural Sciences, Universidade Estadual Paulista (UNESP), Department of Agricultural Engineering, Jaboticabal Campus, state of São Paulo, Brazil. The experimental design used was completely randomized, consisting of 30 treatments in a factorial design with 15 substrates and two irrigation levels in four replicates. The substrates were composed of different materials: urban waste, Plantmax®, dry cattle manure, vermiculite and soil. For the study of seedling growth, the following characteristics were evaluated: height (H), root-collar diameter (D), number of leaves, shoot dry weight, root dry weight, total dry weight, H/D ratio, Dickson's quality index, and the ratio between height and shoot dry weight (H/SDW). Assessments of the first three characteristics were carried out 20, 35, 50 and 65 days after sowing. Results showed that urban waste compost increased the growth of Schizolobium parahyba. There were significant differences for the irrigation levels tested; with better results for 150% ET compared to 100% ET irrigation level.

Cultivation of Pleurotus ostreatus using supplemented spent oyster Mushroom substrate

Spent Agaricus and Pleurotus substrates are mainly used as components of amendments and growing substrates, but not in sufficient quantities to solve the problem of their accumulation in mushroom producing areas, where they represent a potential pollution risk. The mushroom growing sector in Spain generates about 5105 t of spent compost, while the EU, as a whole, produces more than 3.5106 t. Among alternative management applications, it is possible to reuse these wastes in the cultivation of mushrooms, as a casing material for growing Agaricus spp. and as substrate for growing other species. In this work, the application of commercial nutritional supplements (Calprozime, Champfood and Promycel), widely used in Agaricus cultivation, is evaluated for its possible use as additive to substrates, based on spent oyster mushroom substrate (SMS), for the cultivation of Pleurotus ostreatus. Using a mixture of straw and SMS (1:1, w/w) as base material, the addition of CaSO4 (50 g kg-1) and CaCO3 (10 g kg-1) and the above supplements at 20 g kg-1 brought about a remarkable increase in production compared with the substrate without any supplement. The biological efficiencies did not differ significantly from that obtained when a commercial substrate was used as control, reaching values of 48.9 kg/100 kg substrate (dry matter) when Calprozime was used as supplement. Sporophores harvested from the supplemented substrates presented a higher dry matter content than those obtained from both commercial and non-supplemented substrates. SMS is cheap and easily available; it can be integrated into new formulations with the added advantages of lowering production costs, limiting growers' dependence on straw, and decreasing the environmental impact of its ever-growing accumulation.

Thermal behavior of lignin and cellulose from waste composting process

The lignin and cellulose were extracted from reference material (leaves and twigs) and food of compost at different times composting: zero (raw), 30, and 120 days. According to thermogravimetric analysis and its derivative and differential scanning calorimetry curves for these samples, were verified during composting process there were considerable changes in its thermal profiles, as well as, characteristics lignin in cellulose samples and cellulose in lignin samples. These features were found by fourier transformed infrared spectroscopy. © 2012 Akadémiai Kiadó, Budapest, Hungary.

PLA and Organoclays Nanocomposites: Degradation Process and Evaluation of ecotoxicity Using Allium cepa as Test Organism

In this study, nanocomposites of PLA and organoclays Cloisite 20A and Cloisite 30B were prepared by the melt intercalation method and the obtained samples were characterized by transmission electron microscopy (TEM). Since composting is an important proposal to the final disposal of biopolymers, the influence of clays on the hydrolytic degradation process of PLA was evaluated by visual analysis and monitoring of molecular weight after periods of 15 and 30 days of degradation in compost. After degradation of the materials in composting environment, the evaluation of cytotoxic, genotoxic and mutagenic effects of compost aqueous extract was carried out using a bioassay with Allium cepa as test organism. The TEM micrographs permitted the observation of different levels of dispersion, including exfoliated regions. In the evaluation of hydrolytic degradation it was noted that the presence of organoclays can decrease the rate of degradation possibly due to the barrier effect of clay layers and/or the higher degree of crystallinity in the nanocomposite samples. Nevertheless, even in the case of nanocomposites, the molecular weight reduction was significant, indicating that the composting process is favorable to the chain scission of PLA in studied materials. In the analysis performed by the bioassay using A. cepa as test organism, it was found that after degradation of the PLA and its nanocomposites the aqueous extract of compost samples induced a decreasing in the mitotic index and an increasing in the induction of chromosomal abnormalities. These results were statistically significant in relation to the negative control (distilled water). By comparing the results obtained for the nanocomposites in relative to pure polymer, there were no statistically significant differences. The types of the observed chromosomal aberrations indicated a possible genotoxic effect of the materials, which may be related to an aneugenic action of PLA degradation products. © 2013 Springer Science+Business Media New York.

Design of experimental composting of animal carcasses in universitary unit of treatment aimed a correct final disposition and soil improve

For many years, composting has been used as a result of the recycling of organic matter. There is significative animal carcasses accumulation from teaching and researching activities of the university veterinary hospital. Every year, Unesp University needs to dispose correctly about 180 tones of this waste and the composting seemed to be the most sustainable alternative. Piles of animal carcasses were prepared using peanut hulls and tree pruning as bulking agent and water to the first phase of this process. The extracts pH values no impediments for offering germination and indicated a good addition to the soil management. The germination index showed no impediment to the seeds germination on any type of compost and the extracts concentrations not influenced this biological process. No parameters studied assigns risks of contamination of carcasses for the compost development in Unesp according to the proposed design. © 2013 Taylor & Francis Group.

Enhanced bulk and superficial hydrophobicities of starch-based bionanocomposites by addition of clay

In this work, thermoplastic starch (TPS)-clay bionanocomposites were obtained by an innovative methodology using a combination of methodologies commonly used in the composites and nanocomposites preparations. The main objectives or novelties were to confirm efficiency of the processing methodology by field emission gun scanning electron microscopy and investigate the effect of clay content on the spectroscopic, bulk and surface hydrophilic/hydrophobic properties of these bionanocomposites. Raman and FTIR spectroscopies confirmed the changes in the spectroscopic properties of the TPS bionanocomposites with the addition of the clay materials. Water absorption and contact angle measurements were also used to analyze the effect of the clay content on the hydrophilic properties of the TPS bionanocomposites. The results also showed that the addition of the cloisite-Na+ clay increased the bulk and surface hydrophobicities of the TPS matrix, which may increase its industrial application, particularly in manufacturing of food containers. © 2013 Elsevier B.V.