Chemical and sensory characteristics of pulp and peel 'cajá-manga' (Spondias cytherea Sonn.) jelly

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Microbiological or Chemical Models of Enamel Secondary Caries Compared by Polarized-Light Microscopy and Energy Dispersive X-ray Spectroscopy

Different secondary caries models may present different results. The purpose of this study was to compare different in vitro secondary caries models, evaluating the obtained results by polarized-light microscopy (PLM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Standardized human enamel specimens (n = 12) restored with different materials (Z250 conventional composite resin-CRZ, Freedom polyacid-modified composite resin-CRF, Vitremer resin-modified glass-ionomer-GIV, and Fuji IX conventional glass-ionomer cement-GIF) were submitted to microbiological (MM) or chemical caries models (CM). The control group was not submitted to any caries model. For MM, specimens were immersed firstly in sucrose broth inoculated with Streptococcus mutans ATCC 35688, incubated at 37 degrees C/5% CO(2) for 14 days and then in remineralizing solution for 14 days. For CM, specimens were submitted to chemical pH-cycling. Specimens were ground, submitted to PLM and then were dehydrated, gold-sputtered and submitted to SEM and EDS. Results were statistically analyzed by Kruskall-Wallis and Student-Newman-Keuls tests (alpha = 0.05). No differences between in vitro caries models were found. Morphological differences in enamel demineralization were found between composite resin and polyacid-modified composite resin (CRZ and CRF) and between the resin-modified glass-ionomer and the glass-ionomer cement (GIF and GIV). GIF showed higher calcium concentration and less demineralization, differing from the other materials. In conclusion, the glass-ionomer cement showed less caries formation under both in vitro caries models evaluated. (C) 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 90B: 635-640, 2009

Influence of chemical activation of a 35% hydrogen peroxide bleaching gel on its penetration and efficacy-In vitro study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Influence of Chemical Activation on Tooth Bleaching Using 10% Carbamide Peroxide

The aim of this study was to assess the influence of manganese gluconate, a chemical activator of bleaching agents, at a concentration of 0.01% on the efficiency of a 10% carbamide peroxide-based bleaching agent. Forty bovine incisors were immersed in a 25% instant coffee solution for seven days and randomly divided into two groups. Group 1 was the control group and consisted of 10% carbamide peroxide-based bleaching gel only. Group 2 consisted of 10% carbamide peroxide-based bleaching gel and 0.01% manganese gluconate. Three readings of color were taken using the Vita Easy-shade spectrophotometer: the initial reading, a reading at seven days, and a reading at 14 days. Total color variation was calculated by Delta E*Lab. Data were submitted to the statistical t-test (5%), which showed that after seven days group 2 had a significant increase in the degree of tooth bleaching compared with group 1. The mean values (+/-SD) were 16.33 (+/-3.95) for group 1 and 19.29 (+/-4.97) for group 2. However, the results for group 1 and group 2 were similar after 14 days. Adding 0.01% manganese gluconate to 10% carbamide peroxide bleaching gel increased the degree of tooth bleaching after a seven-day treatment and did not influence the resulting shade after 14 days.

In Vitro Assessment of Chemical Activation Efficiency During In-office Dental Bleaching

Purpose: This study compared five types of chemical catalyzing agents added to 35% hydrogen peroxide gel, with regard to their capacity of intensifying in-office dental bleaching results.Methods: One-hundred and twenty bovine incisors were used, of which the crowns and roots were cut in the incisor-apical direction, to acquire the dimensions of a human central incisor. The specimens were sectioned in the mesiodistal direction by means of two longitudinal cuts, the lingual halves being discarded. The vestibular halves received prophylaxis with a bicarbonate jet, ultrasound cleaning and acid etching on the dentinal portion. Next, the specimens were stored in receptacles containing a 25% instant coffee solution for two weeks. After the darkening period, initial measurement of the shade obtained was taken with the Easy Shade appliance, which allowed it to be quantified by the CIELab* method. The samples were divided into six groups, corresponding to the chemical activator used: a) none (CON); b) ferric chloride (CF); c) ferrous sulphate (SF); d) manganese gluconate (GM); e) manganese chloride (CM); f) mulberry root extract (RA). Each group received three 10-minute applications of the gels containing the respective activating agents. Next, a new shade measurement was made.Results: The Analysis of Variance and Tukey tests (alpha=5%) showed statistically significant differences for the shade perception values (p=0.002). Groups GM, CM and RA showed significantly higher means than the control group.Conclusion: The presence of some chemical activators is capable of resulting in a significant increase in tooth shade variation.

Reaction pathway to the synthesis of anatase via the chemical modification of titanium isopropoxide with acetic acid

Anatase nanoparticles were obtained through a modified sol-gel route from titanium isopropoxide modified with acetic acid in order to control hydrolysis and condensation reactions. The modification of Ti(O(i)Pr)(4) with acetic acid reduces the availability of groups that hydrolyze and condense easily through the formation of a stable complex whose structure was determined to be Ti(OCOCH(3))(O(i)Pr)(2) by means of FTIR and (13)C NMR. The presence of this complex was confirmed with FTIR in the early stages of the process. A doublet in 1542 and 1440 cm(-1) stands for the asymmetric and symmetric stretching vibrations of the carboxylic group coordinated to Ti as a bidentate ligand. The gap of 102 cm(-1) between these signals suggests that acetate acts preferentially as a bidentate rather than as a bridging ligand between two titanium atoms. The use of acetic acid as modifier allows the control of both the degree of condensation and oligomerization of the precursor and leads to the preferential crystallization of TiO(2) in the anatase phase. A possible reaction pathway toward the formation of anatase is proposed on the basis of the intermediate species present in a 1:1 Ti(O(i)Pr)(4):CH(3)COOH molar system in which esterification reactions that introduce H(2)O into the reaction mixture were seen to be negligible. The Rietveld refinement and TEM analysis revealed that the powder is composed of isotropic anatase nanocrystallites.

Analytical Methods Employed at Quality Control of Fuel Ethanol

The existence of organic and inorganic contaminants present in both fossil and biomass fuels and the fact that they can provide undesirable effects (environmental problems, corrosion processes, lead to storage instability, and others) implies a rigorous quality control of these fuels, although these contaminants make up a small part of the final fuel composition. Considering the rising importance of fuel ethanol in the worldwide panorama, this review aims at reporting the use of successful alternative analytical methods in the monitoring of organic and inorganic contaminants at trace levels, used to determine and to quantify these substances in fuel ethanol and also presenting all official norms for quality control of fuel ethanol employed by ABNT (Brazilian Association of Technical Norms), ASTM (American Society for Testing and Materials), and ECS (European Committee for Standardization).

Applications of the hexanic fraction of Agave sisalana Perrine ex Engelm (Asparagaceae): control of inflammation and pain screening

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of liming on residual soil respiration and chemical properties in a tropical no-tillage system

Devido às mudanças climáticas do planeta, principalmente ao aquecimento global, as formas de utilização dos solos na agricultura têm atraído grande atenção de pesquisadores. Mudanças de manejo podem influenciar a respiração do solo e, por conseguinte, alterar drasticamente o sequestro de C. Os objetivos deste trabalho foram avaliar, em semeadura direta, a influência da calagem nas emissões de CO2 do solo e correlacioná-las aos atributos químicos deste após dois anos da calagem. Utilizou-se o delineamento em blocos casualizados, com seis repetições. Os tratamentos constituíram de quatro doses de calcário e uma testemunha. Decorridos dois anos da calagem, avaliou-se a emissão residual de CO2 do solo, coletaram-se amostras nas camadas de 0-5, 5-10, 10-20 e 20-30 cm de profundidade e determinaram-se os teores de P, Ca2+ e Mg2+ e valores de pH e de saturação por bases. A emissão residual de CO2 do solo, quando a dose recomendada foi aplicada, foi 24,1 % superior, quando comparada à do solo sem aplicação de calcário, e 47,4 % maior, quando se aplicou o dobro da dose recomendada. A calagem melhorou as condições químicas do solo, e a emissão de CO2 aumentou linearmente com o aumento das doses. A emissão de CO2 do solo apresentou correlações positivas com os teores de P, Ca2+ e Mg2+ e com os valores de pH e de saturação por bases e negativas com os teores de H + Al e Al3+. Maiores coeficientes de correlação entre as taxas de emissão de CO2 do solo e os atributos químicos deste ocorreram na camada de 10-20 cm.

Application methods and dosages of thiamethoxam in thrips control on tomato plants

O tripes Frankliniella schultzei Trybom (Thysanoptera: Thripidae) é um dos mais importantes vetores de tomato spotted wilt tospovirus (TSWV) na cultura do tomate no Brasil. Dois métodos de aplicação do inseticida thiamethoxam foram comparados no controle de tripes em tomate. O experimento foi conduzido em delineamento de blocos ao acaso com sete tratamentos e quatro repetições. Utilizou-se um pulverizador costal manual com lança simples provida de ponta de pulverização com jato cônico vazio JD 14-2 ou modificada, com aplicador tipo esguicho, em substituição à ponta de pulverização. Dosagens de 150 e 200 g i.a. ha-1 foram usadas em única aplicação com esguicho e 50 g i.a. ha-1 em pulverizações semanais, iniciadas aos 48 dias após a semeadura. A eficiência do inseticida em teste foi comparada com diafenthiuron (400 g i.a. ha-1), profenofos + cypermethrin (320+32 g i.a. ha-1, respectivamente) e methamidophos (60 g i.a. 100 L-1 de água), aplicados em pulverização. Não houve diferença estatística entre os métodos de aplicação e doses com thiamethoxam no controle de F. schultzei aos 24 dias após a aplicação, sendo vantajosa a realização de uma única aplicação das maiores dosagens de thiamethoxam com esguicho em comparação às aplicações semanais da menor dosagem em pulverização. A eficiência de controle do tripes com o inseticida thiamethoxam variou de 93 a 95%, nos diferentes métodos e dosagens em teste. Diafenthiuron e profenofos + cypermethrin apresentaram eficiência menor (78 e 88%, respectivamente), porém foram superiores às obtidas com methamidophos (71%). Os produtos e doses utilizados não causaram fitotoxicidade às plantas de tomate.

Fermentation, losses, and aerobic stability of sugarcane silages treated with chemical or bacterial additives

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemical treatment of post-harvest Marandu grass seed residues with different moisture contents

Objetivou-se avaliar o efeito do tratamento químico com ureia (3 ou 5% na MS) e amônia anidra (3% na MS) no feno de resíduo pós-colheita de sementes de Brachiaria brizantha, cv. Marandu, contendo diferentes teores de umidade (15, 25 ou 30%). O delineamento experimental foi em blocos ao acaso com oito tratamentos e quatro repetições (camadas de fardos dentro das pilhas). O feno tratado com 3% de amônia anidra com 15% de umidade ocasionou redução de 84,3 para 79,1% nos teores de fibra em detergente neutro (FDN) e elevação de 37,3 para 55,5% na digestibilidade in vitro da matéria seca (MS) em relação ao grupo controle. A variação na umidade não alterou de maneira significativa a ação da amônia, cujos valores médios foram 77,6% de FDN e 57,3% de digestibilidade in vitro da MS. O feno com 5% de ureia reduziu os teores de FDN de 84,3 para 79,6% em relação ao feno não-tratado, o que tornou necessário o aumento da umidade para 30% para maior efeito sobre a digestibilidade da MS, que aumentou 12 unidades percentuais.

SOCIAL-CONTROL OF GROWTH IN FISH

This review concerns the phenomenon of heterogeneous growth (Het-G) in fish. Het-G is characterized by different growth rates between conspecifics. Although genetic determination on Het-G is recognized, grouping increases the difference in size between conspecifics. This review focuses on population factors and the mechanisms underlying the socially mediated Het-G are summarized and discussed. The aim of this paper is to arrive at a general statement explaining why grouping decreases mean growth and why it suppresses growth only in some individuals. The mechanisms described are: a) food competition, b) chemical factors released by conspecifics, and c) social stress. Social stress is analyzed in terms of the effect on appetite, digestive processes and metabolism. It is proposed that the predominant mechanism promoting socially mediated growth suppression is related to the social habit of the species. The biological significance of growth heterogeneity in fish is also discussed. Growth variability is suggested as an adaptative strategy to optimize survival of the population in a restricted space.

Effect of doses of fungicides and plant resistance activators on the control of Rhizoctonia foliar blight of soybean, and on Rhizoctonia solani AG1-IA in vitro development

Rhizoctonia foliar blight (RFB) of soybean [Glycine max (L.) Merrill] occurs in many tropical and subtropical regions, causing yield reductions of up to 70% and in Brazil, up to 60%. The disease is caused by Rhizoetonia solani AG1-IA and AG1-IB, and by AG2-3 in Japan. RFB occurs in the North, Northeast and Mid-west regions of Brazil. Chemical control remains the only effective method of controlling RFB, but its efficiency depends upon environmental conditions. In this study, 18 fungicides, salicylic acid (SA) and acibenzolar-s-methyl (ASM) were evaluated on R. solani AG1-IA in vitro, by mycelial growth rating and estimating effective concentration for 50% (EC 50) and 90% (EC 90) inhibition of mycelial growth, and in vivo by reduction of disease severity on soybean plants in greenhouse conditions. Mycelial growth was strongly inhibited by the fungicides pyraclostrobin + boscalid and fludioxonil. Preventive fungicide applications were the most effective. Strobilurins were more efficient both in preventive and curative applications. Best results with plant resistance activators were obtained with SA (2.5 mM) sprayed at 20 d before inoculation and with ASM (12.5 mg a.i. l(-1)) 10 d before inoculation. (c) 2005 Elsevier Ltd. All rights reserved.

THE HYPOPHYSEAL-TESTICULAR AXIS AND SEX ACCESSORY-GLANDS FOLLOWING CHEMICAL SYMPATHECTOMY WITH GUANETHIDINE OF PRE-PUBERTAL TO MATURE RATS

Selective chemical sympathectomy of the internal sex organs of prepubertal to mature male Wistar rats was performed by chronic treatment with low doses of guanethidine. Plasma testosterone and luteinizing hormone and the intratesticular level of testosterone were determined. The weight and fructose content of seminal vesicle and ventral prostate were also investigated. The results showed that sympathetic innervation is related to the control of the hypophyseal-testicular axis as well as to the growth and potential secretory activity of the male sex accessory glands.