O rapto de Europa: uma comparação entre Ovídio e Ticiano

In Metamorphoses, the Roman poet Ovid tells the tale of the transformation of Jupiter into a bull to seduce the Phoenician princess Europa. During Renaissance, as is well known, Western civilization fostered an intense renewal of its values under the clear influence of Greco-Roman culture. Ovid, whose fame had not ceased throughout the Middle Ages, became then even better known, and especially his poem Metamorphoses turned into a remarkable source of inspiration not only to literature but also to fine arts and their new humanistic conception. Thus, the episode of the abduction of Europa received a dramatic pictorial expression in the broad brush strokes of the Venetian master Titian Vecellio, who interpreted several classical myths in his canvases at the height of his creative maturity. There are many and obvious relationships in the verses of the ancient Latin poet and the picture of the Italian Renaissancist. In Metamorphoses, the mythical account is described in so many details and set in such an expressive poetic that Titian could take Ovid´s narrative as a model for painting “The Rape of Europa”, doing a true exercise in intersemiotic translation by interpreting verbal signs through pictorial signs.

Influence of different toothpaste abrasives on the bristle end-rounding quality of toothbrushes

To evaluate the influence of different toothpaste abrasives on the bristle wear and bristle tip morphology of toothbrushes with different degrees of hardness. Material and methods Ninety samples of bovine incisor teeth were used in this study. The samples were randomly divided into three groups according to the bristle hardness of the toothbrush used: soft bristles (S); extra-soft bristles (ES); hard bristles (H). The toothbrushes of each group were randomly divided into six subgroups with five toothbrushes each, according to the abrasive of the toothpaste used in the simulation: Negative control (distilled water); toothpaste 1 (silica); toothpaste 2 (hydrated silica); toothpaste 3 (calcium carbonate, calcium bicarbonate and silica); toothpaste 4 (tetrapotassium pyrophosphate, silica and titanium dioxide); toothpaste 5 (calcium carbonate). The samples were placed in a toothbrushing simulating machine that simulating three months of brushing. The toothbrush bristles were evaluated by the bristle wear index, and the bristle tips morphology was evaluated by the bristle tip morphology index. Results The ES brush presented the highest bristle wear among the toothbrushes. Additionally, the S brushes showed better morphology of the bristles followed by ES and H brushes. The type of abrasive only influenced the bristle tip morphology of the ES brushes. The toothpaste 3 induced the worse bristle tip morphology than all the other toothpastes. Conclusions Different abrasives have influence only on the bristle tip morphology of the ES brushes.

Influência de diferentes métodos de limpeza sobre a eficiência de corte e as características morfológicas de fresas Carbide

Introduction: Currently, there are many questions regarding the cleaning methods seeking greater efficiency and less loss of burs. Aim: the aim of this study was to evaluate the influence of cleaning methods on the cutting efficiency and morphological characteristics of stainless steel burs tungsten carbide (carbide). Materials and method: Thirty burs were divided into five groups (n = 5) according with the cleaning method: L1 - steel brush, L2 - nylon brush, L3 - ultrasound  +  distilled water, L4 - ultrasound + descaling solution and L5 - no cleaning method (control). The burs were used for the cutting of bovine enamel during six periods of 12 minutes each. After each period, the burs were cleaned (except L5 ) following the protocol established for each group. The cutting efficiency was determined by mass loss and morphological characteristics. Result: The average amount of wear after 72 minutes of use were L1  = 0.3558 g; L2  = 0.4275 g; L3  = 0.4652 g; L4  = 0.4396 g e L5  = 0.4854 g; significant differences in the time of use (p  <  0.001) and cleaning method (p  <  0.001). The L1 group showed the worst performance. Regardless of the experimental group, morphological analysis revealed alterations in the cutting blades soon after the first 12 minutes, being L1 the most affected group. Conclusion: The cleaning with wire brush was the most damaging method to the cutting efficiency and to the morphology of carbide burs.

In vitro evaluation of Biosilicate® dissolution on dentin surface: a SEM analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo das propriedades estímulo responsivas dos polímeros escovas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of toothpaste with nano-sized trimetaphosphate on dental caries: In situ study

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Binding analysis of Bacillus thuringiensis Cry1 proteins in the sugarcane borer, Diatraea saccharalis (Lepidoptera: Crambidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of different toothpaste abrasives on the bristle end-rounding quality of toothbrushes

ObjectivesTo evaluate the influence of different toothpaste abrasives on the bristle wear and bristle tip morphology of toothbrushes with different degrees of hardness.Material and methodsNinety samples of bovine incisor teeth were used in this study. The samples were randomly divided into three groups according to the bristle hardness of the toothbrush used: soft bristles (S); extra-soft bristles (ES); hard bristles (H). The toothbrushes of each group were randomly divided into six subgroups with five toothbrushes each, according to the abrasive of the toothpaste used in the simulation: Negative control (distilled water); toothpaste 1 (silica); toothpaste 2 (hydrated silica); toothpaste 3 (calcium carbonate, calcium bicarbonate and silica); toothpaste 4 (tetrapotassium pyrophosphate, silica and titanium dioxide); toothpaste 5 (calcium carbonate). The samples were placed in a toothbrushing simulating machine that simulating three months of brushing. The toothbrush bristles were evaluated by the bristle wear index, and the bristle tips morphology was evaluated by the bristle tip morphology index.ResultsThe ES brush presented the highest bristle wear among the toothbrushes. Additionally, the S brushes showed better morphology of the bristles followed by ES and H brushes. The type of abrasive only influenced the bristle tip morphology of the ES brushes. The toothpaste 3 induced the worse bristle tip morphology than all the other toothpastes.ConclusionsDifferent abrasives have influence only on the bristle tip morphology of the ES brushes.

Intraoral fluoride levels after use of conventional and high-fluoride dentifrices

This study aimed to evaluate saliva and plaque as indicators of intraoral fluoride (F) levels after the use of conventional and high-fluoride dentifrices.Subjects were randomly assigned to brush their teeth with conventional (1000 ppm F), high-fluoride (5000 ppm F), and placebo dentifrices (fluoride free) for 10 days, following a double-blind, crossover protocol. Saliva and plaque samples were collected on the morning of the 5(th) and 10th days, respectively at 1 and 12 h after brushing, and analyzed with an ion-selective electrode after HMDS-facilitated diffusion. Data were analyzed by two-way repeated measures ANOVA, Tukey's test and Spearman's correlation coefficient (p < 0.05).Plaque and salivary F levels were significantly increased after the use of conventional and high-fluoride dentifrices when compared to values obtained for placebo, except plaque 12 h after the use of conventional dentifrice. A positive and significant correlation was found between fluoride concentrations in plaque and saliva for both times of sample collection.Both indicators assessed were able to detect significant differences among treatments and between times after brushing. The use of a high-fluoride dentifrice is able to significantly increase intraoral fluoride levels throughout the day, being therefore a useful therapy for patients at high caries risk.A dentifrice with high fluoride concentration could be regarded as a useful therapy of F delivery for high caries-risk patients, since intraoral F levels were sustained throughout most of the day after using this formulation.

Raising of horn fly haematobia irritans (L.) (diptera: muscidae) in laboratory by means of egg and larva inoculation

Several studies have required Haematobia irritans (L.) raising in laboratory. The present study assessed two methods of inoculating immature forms of H. irritans to obtain adults. In 2007, 15 Nellore steers (Bos indicus) (L.) were used for the collection of feces free of anthelmintic treatment and flies to produce for eggs and larva. For method I, 30 eggs were incubated in square filter paper (5 × 5 cm) and deposited on bovine feces (500 g) where they were kept until hatching and spontaneous penetration of larvae (L1) into the fecal mass. After 24 h, eggs were analyzed under a stereoscope microscope (40×) for the number of larvae that instinctively penetrated the feces. In method II, larvae were obtained only by natural egg hatching. At birth, 30 larvae were collected and individually inoculated, directly onto the fecal plate by employing a moistened brush. The tests were carried out at controlled temperature (28˚C ± 2˚C) and saturated humidity (80%) until the emergence of flies with both methods. The number of emerged flies was considered in the result. Using method I, 276 (76.7%) flies emerged from 360 inoculated eggs, while using method II, 283 (78.6%) flies emerged from 360 inoculated larvae. There was no significant difference (P = 0.7821) between methods for the number of flies; however, the proportion between males and females by means of larva inoculation was different from 1:1 (P = 0.0146). Results indicated that both methods led to a satisfactory production of flies and egg inoculation provided an easier establishment.

Effect of toothpastes with different abrasives on eroded human enamel: an in situ/ex vivo study

The aim of the present study was to investigate the abrasive effect of CaCO3 and SiO2-based fluoride-free experimental toothpastes on eroded human permanent dental enamel and evaluate the effectiveness of waiting periods between acid exposure and tooth brushing. Twelve volunteers wore palatal appliances containing human enamel blocks for two periods of five days each. The appliances were immersed in a soft drink for five minutes four times a day (9:00 am, 11:00 am, 2:00 pm and 4:00 pm). On two occasions, two blocks were not submitted to additional treatment; two blocks were brushed (30 s) either with a CaCO3 or SiO2 toothpaste immediately after erosion and two blocks were brushed 1 h after erosion. Thus, the sample was divided into six groups: erosion alone (CaCO3 and SiO2 control); brushing with fluoride- free toothpaste (CaCO3 immediate and 1 h after erosion; SiO2 immediate and 1 h after erosion). Significant differences in wear depth were found between the enamel blocks in the CaCO3 immediate and 1 h after erosion groups and the blocks in the CaCO3 control group (p=0.001; p=0.022). No significant differences were found regarding the change in roughness and wear depth between blocks submitted to immediate abrasion and 1 h after erosion (CaCO3 and SiO2). The data revealed that surface roughness and wear depth is increased when erosion is combined with dental abrasion, regardless of the abrasive used. Waiting for 1 h to brush the eroded blocks offered no protective effect.

Percepção e atitudes de pedagogos sobre aspectos relevantes do uso de escovas dentárias

Objective: To evaluate the perception and attitude of kindergarten teachers in relation to the storage of toothbrushes. Methodology: The analysis instrument used was a structured and previously validated questionnaire. The sample universe of this study was composed of all states and municipals kindergarten school teachers who taught in school year of 2010 at the town of Araçatuba / SP (n = 232). The criteria used to integrate the study were: to have a college degree and agree to participate. Results: 164 teachers participated of the study. The results were analyzed using Epi Info 6.04 and showed that 55% of the teachers had received some information about the proper storage of toothbrushes, and only 35% believed that the toothbrushes were storaged improperly. Most teachers, 97% reported being possible the transmission of microorganisms through the brush, however, there was observed difficulty in identifying which diseases could be transmitted. About the question related to the execute of supervised toothbrushing, 93% of the educators said that they realize supervised toothbrushing and the same percentage was observed for the identification of preschoolers at the toothbrushes. Conclusions: The perception and attitude of the teachers ahead the storage of toothbrushes are weak and limited, so there is a need for educational programs targeted to this group, so that they would have more information and knowledge related to the correct storage of toothbrushes and would continue to perform oral health preventive methods.

Análise dos riscos físicos e ergonômicos em roçadora transversal motorizada

According to Statistical Yearbook of Social Security (2011), the number of accidents at work recorded in the agricultural sector is quite high, in the year 2010 there are records of thirty-four thousand nine hundred and ninetysix accidents, and in the year of 2011 there were thirty-one thousand and ninety-six accidents in the industry. Among so many diseases and accidents at work hearing loss is one of them. According to the Pan American Health Organization (2011) the Occupational hearing loss is then jury to the worker's health, often in the workplace. Mechanical vibrations are also present in many human activities exposing employees to an extremely aggressive agent. The combined action of these two factors can cause damage to the health of the worker, in this way, noise and vibration are the two major occupational agents present in the brush cutter operator activity. In the case there is another risk factor, the open work, which exposes the employee to the Sun’s rays and the high temperature indices. Studies have shown that: noise exceeds 115 dB (A) vibration 4.0 m/s2 and thermal stress of 29.9 o C. Ergonomic evaluations also demonstrated that the activity cause injury to workers.

Interações moleculares das proteínas CRY1 e VIP3 no controle de lepidópteros em cana-de-açúcar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Colonização bacteriana na região marginal de restaurações cerâmicas: efeito do método de remoção do cimento e do polimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)