Avaliação das alterações dentárias e esqueléticas induzidas pelo uso do aparelho de Herbst no tratamento da classe II na dentadura mista: Revisão sistemática

Objective: evaluate the immediate dental and skeletal changes induced by the Herbst appliance on early treatment of Angle´s Class II malocclusion. Material and Method: several electronic databases such as Scopus, Pub Med, Medline, Cochrane Library, Lilacs and Scielo were searched. The abstracts that fullfilled the selection criteria were selected and those that did not provide enough information about these criteria were selected but the final decision of including them or not on the research, was taken after the complete reading of the article. The selection criteria were: clinical studies with Class II individuals, both male and female, with initial age of 7 to 10 years, treated with the Herbst appliance that analysed the dental and/or skeletal changes evaluated on lateral cephalometric radiographs; researches where the treatment performed did not involve extractions or surgical interventions; studies that included patients without syndromes or health concerns and articles published in English or Portuguese. Results and Conclusions: five articles were selected. The articles showed that significant changes happened in the mandibular sagittal lenght, on facial convexity angle, on maxillo-mandibular relationship, on retroclination of the upper incisors and on distal movement of the upper molars, on proclination of the lower incisors and on extrusion of the lower molars. The appliance exerted a limited effect on the anterior relocation of the maxillary complex and on facial heights. However, more studies about the performance of the Herbst appliance on early treatment of Class II are needed.

Estabilidade oclusal a longo prazo de Classe II, divisão 1, após tratamento com extração de pré-molares

Patients are looking for esthetic and functional changes when seeking orthodontic treatment and expect the remaining of a stable occlusion. Occlusion stability is one of the goals of the orthodontist; however, dental relationships changes in long-term can occur leading to a relapse of the treatment. Teeth and shape of arches tend to return to the original form, been the retention phase important after the appliance removal, even after several years of post-treatment. This article approaches a submission of a clinical case of Class II division 1 treated with extraction of premolars analyzing its long-term stability.

Tratamento da má oclusão de classe II com aparelho Jasper Jumper

The Jasper Jumper appliance was developed as a fixed orthopedic device that is connected to the upper and lower leveling arches to promote the Class II correction by restricting the maxillary growth (headgear effect), mandibular growth inducement (activator effect) and dentoalveolar changes.

Tratamento da má oclusão de classe II, divisão 1, na dentadura mista com apareljo extrabucal removivel

Extraoral appliances represent an alternative for correction of Class II malocclusions. The application of external force leads to tooth movement and influence the growth of the maxillomandibular complex. This article aims to present the removable headgear as an adjuvant in the treatment of Class II division 1 in the mixed dentition.

Distalização dos molares superiores com aparelho Pendex: estudo em modelos de gesso

OBJETIVO: a presente pesquisa clínica, longitudinal e prospectiva, avaliou os efeitos do aparelho Pendex mediante o emprego de modelos de gesso. METODOLOGIA: utilizou-se uma amostra de 30 modelos de gesso, obtidos no início e no final da distalização dos molares superiores com o aparelho Pendex, de 15 jovens brasileiros tratados no Curso de Pós-Graduação, nível de Mestrado em Ortodontia, da Faculdade de Odontologia de Araçatuba - UNESP. RESULTADOS E CONCLUSÕES: os resultados mostraram aumento do perímetro do arco dentário superior com inclinação distal e controle transversal dos primeiros molares superiores.

Effect of different adhesive systems on microleakage in class II composite resin restorations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Skeletal and dental components of Class II correction with the bionator and removable headgear splint appliances

The purpose of this study was to differentiate the dentoalveolar and skeletal effects to better understand orthodontic treatment. We evaluated the treatment changes associated with the bionator and the removable headgear splint (RHS). Methods: The sample comprised 51 consecutively treated Class II patients from 1 office who had all been successfully treated with either a bionator (n = 17) or an RHS appliance (n = 17). Class II patients waiting to start treatment later served as controls (n = 17). A modified version of the Johnston pitchfork analysis was used to quantify the dentoalveolar and skeletal contributions to the anteroposterior correction at the levels of the molars and the incisors. Results: Both appliances significantly improved anteroposterior molar relationships (2.15 mm for the bionator, 2.27 mm for the RHS), primarily by dentoalveolar modifications (1.49 and 2.36 mm for the bionator and the RHS, respectively), with greater maxillary molar distalization in the RHS group. Overjet relationships also improved significantly compared with the controls (3.11 and 2.12 mm for the bionator and the RHS, respectively), due primarily to retroclination of the maxillary incisors (2.2 and 2.38 mm for the bionator and the RHS, respectively). The differences between overall corrections and dentoalveolar modifications for both molar and overjet relationships were explained by skeletal responses, with the bionator group showing significantly greater anterior mandibular displacement than the RHS group. Conclusions: The bionator and the RHS effectively corrected the molar relationships and overjets of Class II patients primarily by dentoalveolar changes. (Am J Orthod Dentofacial Orthop 2008; 134: 732-41)

Orthodontic movement after periodontal regeneration of class II furcation: a pilot study in dogs

Purpose: the effect of orthodontic movement on the periodontal tissues of maxillary second pre-molars, after regenerative treatment for class II furcations, was evaluated in four mongrel dogs.Material and Methods: Class II furcation lesions were created. After 75 days they were treated with bovine bone mineral matrix and guided tissue regeneration with absorbable membrane. After 2 months of daily plaque control, each of the dog's furcation pre-molars was randomly assigned to a test or control group. Orthodontic appliances were placed on both sides of the maxilla using third pre-molars and canines as anchorages. In the test group, bodily orthodontic movement of the second pre-molars was performed in the mesial direction for 3 months while control pre-molars remained unmoved. The dogs were sacrificed for histometric and histologic analyses.Results: There were no statistically significant differences between the two groups in total bone and biomaterial areas or linear extension of periodontal regeneration on the radicular surfaces. In the test group, however, there was a tendency to a greater quantity of bone and a lesser quantity of biomaterial.Conclusion: the orthodontic movement was not pre-judicial to the results obtained with the regenerative periodontal treatment.

Evaluation of marginal microleakage in Class II cavities: Effect of microhylolrid, flowable, and compactable resins

Objective: the goal of the present study was to evaluate the microleakage on the cementum/dentin and enamel surfaces in Class 11 restorations, using different kinds of resin composite (microhybrid, flowable, and compactable). Method and materials: Forty human caries-free molars were extracted and selected. Eighty Class 11 standardized cavities were made in the cervical wall at the cementoenamel junction (CEJ) and at the mesial and distal surfaces. The teeth were divided into four groups: G1 - adhesive system + microhybrid resin composite Z100; G2 - adhesive system + compactable resin composite Prodigy Condensable; G3 - adhesive system + flowable resin composite Revolution + Z1 00 resin composite; G4 - adhesive system + Revolution fluid resin + compactable resin composite Prodigy Condensable. The adhesive system used in this study was Scotchbond Multi-Purpose Plus. The specimens were thermocycled in baths of 5degreesC and 55degreesC for 1,000 cycles and immersed in 50% silver nitrate solution. The specimens then were sectioned and evaluated on degree of dye penetration. Results: the results were evaluated using the nonparametric Kruskall-Wallis test, which showed a statistically significant difference between groups G1 and G4, G2 and G4, and G3 and G4. Conclusions: None of the materials was able to eliminate the marginal microleakage at the cervical wall; the application of a low-viscosity resin composite combined with a compactable resin composite significantly decreased the microleakage.

Crystallization and preliminary X-ray diffraction analysis of a class II phospholipase D from Loxosceles intermedia venom

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Longitudinal study of mandibular behavior in Class I subjects with vertical and horizontal growth

OBJETIVO: avaliar as possíveis diferenças no comportamento mandibular em indivíduos Classe I com crescimento vertical e horizontal. MÉTODOS: a amostra desse estudo consistiu de 20 indivíduos Classe I não tratados, sendo o grupo 1 composto por 10 indivíduos com padrão de crescimento vertical e o grupo 2 por 10 indivíduos com padrão de crescimento horizontal, pertencentes aos arquivos do Burlington Growth Center, University of Toronto, no Canadá, acompanhados radiograficamente nas idade de 9, 12 e 21 anos. Determinou-se, por meio de telerradiografias cefalométricas, em norma lateral, os valores médios para a avaliação longitudinal do comportamento da mandíbula utilizando as medidas SNB, Co-Gn, SN.GoMe, altura facial anterior e altura facial posterior. RESULTADOS: o valor de SNB e Co-Gn foram maiores no grupo com crescimento horizontal em todas as idades. A medida Sn.GoMe foi significativamente menor no grupo com crescimento horizontal, a altura facial anterior (AFH) apresentou valores menores nos indivíduos com padrão de crescimento horizontal, e a altura facial posterior (PFH) apresentou valores menores nos indivíduos com crescimento vertical. CONCLUSÃO: as comparações longitudinais das tendências de crescimento de indivíduos Classe I indicam que existe diferenças significativas entre os dois grupos. A mandíbula apresentou tendência à rotação horária no grupo 1. O grupo 2 exibiu tendência à característica de indivíduos braquicefálicos, na forma facial, devido ao déficit no desenvolvimento vertical na altura facial anterior.

Estudo cefalométrico das alturas faciais anterior e posterior, em crianças brasileiras, portadoras de má oclusão Classe I de Angle, na fase de dentadura mista

Realizou-se um estudo das alturas faciais anterior e posterior em 79 crianças brasileiras, sendo 46 do gênero feminino e 33 do masculino, com idades de 8 a 11 anos, portadoras de má oclusão Classe I de Angle, na fase de dentadura mista, não submetidas a tratamento ortodôntico. Esta investigação utilizou duas radiografias cefalométricas em norma lateral, de cada criança, com intervalo de 8 a 16 meses entre uma radiografia e outra, para comparação dos dados cefalométricos. Foram estudadas as proporções faciais anteriores, ou seja, a relação entre as dimensões N-Me (AFT), N-ENA (AFS), ENA-Me (AFI) e o relacionamento entre as dimensões Ar-GO (AFP) e a distância entre o plano palatino ao mento (AFA) , isto é, o Índice da Altura Facial (IAF). Os resultados obtidos, possibilitaram constatar que as tendências de crescimento foram equilibradas em todas as situações estudadas; a dimensão altura facial inferior, contribuiu de forma mais significativa, nas alterações observadas na altura facial total; as proporções faciais anteriores se mantiveram em torno de 42% para a altura facial superior e 58% para a altura facial inferior; o índice da altura facial ou se manteve constante em torno de 0,66 ou apresentou uma tendência a aumentar com a idade; não ocorreu dimorfismo sexual com relação às proporções faciais e índice da altura facial.