Generating VRS data using atmospheric models: How far can we go?

Nowadays, with the expansion of the reference stations networks, several positioning techniques have been developed and/or improved. Among them, the VRS (Virtual Reference Station) concept has been very used. In this paper the goal is to generate VRS data in a modified technique. In the proposed methodology the DD (double difference) ambiguities are not computed. The network correction terms are obtained using only atmospheric (ionospheric and tropospheric) models. In order to carry out the experiments it was used data of five reference stations from the GPS Active Network of West of São Paulo State and an extra station. To evaluate the VRS data quality it was used three different strategies: PPP (Precise Point Positioning) and Relative Positioning in static and kinematic modes, and DGPS (Differential GPS). Furthermore, the VRS data were generated in the position of a real reference station. The results provided by the VRS data agree quite well with those of the real file data.

Effectiveness of six different disinfectants on removing five microbial species and effects on the topographic characteristics of acrylic resin

Purpose: The aim of this study was to evaluate the effectiveness of disinfectant solutions (1% sodium hypochlorite, 2% chlorhexidine digluconate, 2% glutaraldehyde, 100% vinegar, tabs of sodium perborate-based denture cleanser, and 3.8% sodium perborate) in the disinfection of acrylic resin specimens (n = 10/group) contaminated in vitro by Candida albicans, Streptococcus mutans, S. aureus, Escherichia coli, or Bacillus subtilis as measured by residual colony-forming unit (CFU). In a separate experiment, acrylic resin was treated with disinfectants to monitor potential effects on surface roughness, Ra (μm), which might facilitate microbial adherence. Materials and Methods: Three hundred fifty acrylic resin specimens contaminated in vitro with 1×10 6 cells/ml suspensions of standard strains of the cited microorganisms were immersed in the disinfectants for 10 minutes; the control group was not submitted to any disinfection process. Final counts of microorganisms per ml were performed by plating method for the evaluation of microbial level reduction. Results were compared statistically by ANOVA and Tukey's test (p ≤ 0.05). In a parallel study aiming to evaluate the effect of the tested disinfectant on resin surface, 60 specimens were analyzed in a digital rugosimeter before and after ten cycles of 10-minute immersion in the disinfectants. Measurements of superficial roughness, Ra (μm), were compared statistically by paired t-test (p ≤ 0.05). Results: The results showed that 1% sodium hypochlorite, 2% glutaraldehyde, and 2% chlorhexidine digluconate were most effective against the analyzed microorganisms, followed by 100% vinegar, 3.8% sodium perborate, and tabs of sodium perborate-based denture cleanser. Superficial roughness of the specimens was higher after disinfection cycles with 3.8% sodium perborate (p = 0.03) and lower after the cycles with 2% chlorhexidine digluconate (p = 0.04). Conclusion: Within the limits of this experiment, it could be concluded that 1% sodium hypochlorite, 2% glutaraldehyde, 2% chlorexidine, 100% vinegar, and 3.8% sodium perborate are valid alternatives for the disinfection of acrylic resin. © 2008 by The American College of Prosthodontists.

Cementation of fiber post: influence of the cement insertion techniques on the bond strength of the fiber post-root dentin and the quality of the cement layer.

The aim of this study was to assess the influence of resin cement insertion methods on the bond strength of a fiber post to root dentin and quality of the cement layer. Forty bovine single-roots (length =16 mm) were randomly allocated into four groups, according to the cement insertion methods (N.=10): Gr1- Lentulo drill #40, Gr2- Centrix syringe, Gr3- Explorer #5, Gr4- fiber post. The root canals were prepared at 12 mm, using preparation bur # 3 of a cylinder quartz-FRC post (Aesthet post-plus, Bisco). The fiber posts were cemented using a multi-step etch-and-rinse adhesive system (All Bond 2®, Bisco) and a dual-cured resin cement (Duolink, Bisco). Each root was cut into seven samples: four samples of 1.8 mm thickness for push-out testing, and three with 0.5 mm for cement layer quality analyzing. One-way ANOVA was used for the push-out test values and the One-Way Kruskal-Wallis (P<0.05) and Dunn (10%) tests for the cement layer analyzes. ANOVA showed that the cement layer quality was affected by the cement insertion methods (P=0.0044): Gr1 (3.8 ± 1.3a), Gr2 (3.2 ± 1.3a), Gr3 (5.2 ± 1.5a,b) and Gr4 (5.2 ± 1.5b) (Dunn test), whereas the bond strength (MPa) was not affected by cement insertion methods: G1 (4.2 ± 1.3), G2 (3.2 ± 1.8), G3 (4.5 ± 0.9), G4 (3.1 ± 1.3). The fiber posts should be cemented with the assistance of the lentulo drill or centrix syringe to promote the best cement layer results.

Effects of three restorative techniques in the bond strength and nanoleakage at gingival wall of Class II restorations subjected to simulated aging

Objective: To evaluate the effects of simulated aging in bond strength and nanoleakage of class II restorations using three different restorative techniques. Materials and methods: Class II preparations (n = 12) were restored using: FS - composite resin Filtek Supreme Plus (3M/ESPE); RMGIC + FS - resin-modified glass ionomer cement Vitrebond Plus (3M/ESPE) + FS; and FFS + FS - flowable composite resin Filtek Supreme Plus Flowable (3M ESPE) + FS. The teeth were assigned into two groups: Control and Simulated Aging - Thermal/Mechanical cycling (3,000 cycles, 20-80 °C/500,000 cycles, 50 N). From each tooth, two slabs were assessed to microtensile bond strength test (μTBS) (MPa), and two slabs were prepared for nanoleakage assessment, calculated as penetration along the restoration margin considering the penetration length (%) and as the area of silver nitrate particle deposition (μm2). Data were analyzed by two-way analysis of variance (ANOVA) followed by Tukey's post hoc test (p < 0. 05). Results: FS presented the highest μTBS to dentin (22. 39 ± 7. 55 MPa) after simulated aging, while the presence of flowable resin significantly decreased μTBS (14. 53 ± 11. 65 MPa) when compared to no aging condition. Both control and aging groups of RMGIC + FS presented the highest values of silver nitrate penetration (89. 90 ± 16. 31 % and 97. 14 ± 5. 76 %) and deposition area (33. 05 ± 12. 49 and 28. 08 ± 9. 76 μm2). Nanoleakage was not affected by simulated aging. Conclusions: FS presented higher bond strength and lower nanoleakage and was not affected by simulated aging. Use of flowable resin compromised the bond strength after simulated aging. Clinical relevance: The use of an intermediate layer did not improve the dentin bond strength neither reduced nanoleakage at the gingival margins of class II restorations under simulated aging conditions. © 2012 Springer-Verlag.

The role of Bi2O3 on the thermal, structural, and optical properties of tungsten-phosphate glasses

Glasses in the ternary system (70 - x)NaPO3-30WO 3-xBi2O3, with x = 0-30 mol %, were prepared by the conventional melt-quenching technique. X-ray diffraction (XRD) measurements were performed to confirm the noncrystalline nature of the samples. The influence of the Bi2O3 on the thermal, structural, and optical properties was investigated. Differential scanning calorimetry analysis showed that the glass transition temperature, Tg, increases from 405 to 440 C for 0 ≤ x ≤ 15 mol % and decreases to 417 C for x = 30 mol %. The thermal stability against devitrification decreases from 156 to 67 C with the increase of the Bi2O3 content. The structural modifications were studied by Raman scattering, showing a bismuth insertion into the phosphate chains by Bi-O-P linkage. Furthermore, up to 15 mol % of Bi 2O3 formation of BiO6 clusters is observed, associated with Bi-O-Bi linkage, resulting in a progressive break of the linear phosphate chains that leads to orthophosphate Q0 units. The linear refractive index, n0, was measured using the prism-coupler technique at 532, 633, and 1550 nm, whereas the nonlinear (NL) refractive index, n 2 was measured at 1064 nm using the Z-scan technique. Values of 1.58 ≤ n0 ≤ 1.88, n2 ≥ 10-15 cm 2/W and NL absorption coefficient, α2 ≤ 0.01 cm/GW, were determined. The linear and NL refractive indices increase with the increase of the Bi2O3 concentration. The large values of n0 and n2, as well as the very small α2, indicate that these materials have large potential for all-optical switching applications in the near-infrared. © 2012 American Chemical Society.

Systematic reviews showed insufficient evidence for clinical practice in 2004: What about in 2011? the next appeal for the evidence-based medicine age

Rationale and aim The aims of the Cochrane systematic reviews are to make readily available and up-to-date information for clinical practice, offering consistent evidence and straightforward recommendations. In 2004, we evaluated the conclusions from Cochrane systematic reviews of randomized controlled trials in terms of their recommendations for clinical practice and found that 47.83% of them had insufficient evidence for use in clinical practice. We proposed to reanalyze the reviews to evaluate whether this percentage had significantly decreased. Methods A cross-sectional study of systematic reviews published in the Cochrane Library (Issue 7, 2011) was conducted. We randomly selected reviews across all 52 Cochrane Collaborative Review Groups. Results We analyzed 1128 completed systematic reviews. Of these, 45.30% concluded that the interventions studied were likely to be beneficial, of which only 2.04% recommended no further research. In total, 45.04% of the reviews reported that the evidence did not support either benefit or harm, of which 0.8% did not recommend further studies and 44.24% recommended additional studies; the latter has decreased from our previous study with a difference of 3.59%. Conclusion Only a small number of the Cochrane collaboration's systematic reviews support clinical interventions with no need for additional research. A larger number of high-quality randomized clinical trials are necessary to change the 'insufficient evidence' scenario for clinical practice illustrated by the Cochrane database. It is recommended that we should produce higher-quality primary studies in active collaboration and consultation with global scholars and societies so that this can represent a major component of methodological advance in this context. © 2012 John Wiley & Sons Ltd.

Isolation and characterization of SNPs within HSC70 gene in the freshwater prawn Macrobrachium amazonicum

We report the discovery of 13 synonymous single nucleotide polymorphisms (SNPs) within a fragment of HSC70 gene in Macrobrachium amazonicum. Polymorphisms were assessed using the reference sequence of the HSC70 gene in Macrobrachium rosenbergii to the primers design. The minor allele frequency ranged from 0.011 to 0.213. None of the SNPs deviated significantly from Hardy-Weinberg equilibrium. These SNPs will be useful to access the genetic variation of populations and to the study of their relations with characteristics of interest for aquaculture. Both cases, favoring the conservation of the natural stocks of Amazon river prawn. © 2013 Springer Science+Business Media Dordrecht.

Aplicação de modelos lineares para análise de expressão gênica em experimentos de microarrays

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Assistência de ar e angulação da barra pulverizadora na deposição e perdas da pulverização na cultura da batata

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da produção de uvas finas para mesa na região noroeste do Estado de São Paulo: questões técnicas, ambientais e econômicas

Pós-graduação em Agronomia - FEIS

Insecta e Arachnida associados ao solo: plantas herbáceas como área de refúgio visando ao controle biológico conservativo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vidros óxidos contendo átomos pesados para aplicações em óptica não linear e fotônica na região do infravermelho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Agregação de fatores de risco cardiovascular e ocorrência de hipertensão arterial em adultos sedentários

OBJETIVO: Analisar em uma grande amostra de adultos sedentários a possível associação entre hipertensão arterial e baixa aptidão cardiorrespiratória, obesidade geral e central. MÉTODOS: A amostra foi composta por 1.092 adultos sedentários brasileiros (429 homens e 633 mulheres). Pressão arterial foi acessada e hipertensão arterial diagnosticada. Três fatores de risco cardiovascular foram considerados: obesidade geral (índice de massa corporal), obesidade abdominal (circunferência de cintura) e baixa aptidão cardiorrespiratória (teste submáximo em cicloergômetro). RESULTADOS: A taxa de hipertensão arterial foi de 9,3% (IC95% = 7,6 - 11,2). Houve associação entre mais alta prevalência de hipertensão arterial e diagnóstico de obesidade (p = 0,001), valores elevados de circunferência de cintura (p = 0,001) e baixo VO2máx (p = 0,013). Independentemente de idade e sexo, indivíduos sedentários com simultaneamente baixo consumo máximo de oxigênio e obesidade geral (RP = 5,21 [IC95% = 8,94 - 3,03]; p = 0,001) ou abdominal (RP = 4,05 [IC95% = 2,22 - 7,40]; p = 0,001) apresentaram maior probabilidade de ser hipertenso que os sedentários com nenhum fator de risco. CONCLUSÃO: Adultos sedentários, independentemente de sexo e idade, a presença de baixa aptidão cardiorrespiratória está associada à hipertensão arterial apenas quando também há obesidade geral ou abdominal, indicando que a interação destas variáveis tem relevante peso na gênese da doença.

Characterization, subsite mapping and N-terminal sequence of miliin, a serine-protease isolated from the latex of Euphorbia milii

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Neurobiological Correlates of Apathy in Alzheimer's Disease and Mild Cognitive Impairment: A Critical Review

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)