Confinement and soliton solutions in the SL(3) Toda model coupled to matter fields

We consider an integrable conformally invariant two-dimensional model associated to the affine Kac-Moody algebra sl3(ℂ). It possesses four scalar fields and six Dirac spinors. The theory does not possesses a local Lagrangian since the spinor equations of motion present interaction terms which are bilinear in the spinors. There exists a submodel presenting an equivalence between a U(1) vector current and a topological current, which leads to a confinement of the spinors inside the solitons. We calculate the one-soliton and two-soliton solutions using a procedure which is a hybrid of the dressing and Hirota methods. The soliton masses and time delays due to the soliton interactions are also calculated. We give a computer program to calculate the soliton solutions. © 2002 Published by Elsevier Science B.V.

RNA reallocation during initial spermatic meiosis of Pseudonannolene tocaiensis Fontanetti, 1996

Toluidine Blue dye containing increasing concentrations of Mg2+ or Ca2+ can show loss of metachromacy at a certain concentration of the inorganic cation when staining DNA-protein complexes in vitro and in vivo. This process has been named Critical Electrolyte Concentration (CEC) and is applied to the study of protein-nucleic acid complexes at different stages of chromatin supra-organization. Male gametocytes of the species Pseudonannolene tocaiensis were studied, observing a large amount of ribonucleoproteins in the gametocytes cytoplasm throughout prophase I. The nucleolus is maintained during most of the prophase. The highly condensed region showing the bouquet formation appeared stained with the typical tonality for chromatin; this region corresponds to the constitutive heterochromatin. We also observed the presence of RNA all through the chromosomes in prophase I. The permanence of this material surrounding the chromosomes during male meiosis is difficult to explain, since a great reduction of the products of spermatogenesis occurs due to the fact that most of the material of the spermatozoids is not used during fecundation. However, in P. tocaiensis this material is remains even at the spermatids. It is known that during the spermiogenesis of certain insects, RNA synthesis continues at the spermatid, being subsequently eliminated from the nucleus and then from the cell due to the elongation of the nucleus. Therefore, we could suggest that permanence of this material (RNA) during meiosis has a function in the process of cell division.

Variabilidade espacial da estabilidade de agregados e matéria orgânica em solos de relevos diferentes

Soils submitted to the same management system in places with small relief variation manifest different spatial variability on their attributes. The objective of this work was to evaluate the spatial variability of the geometric medium diameter, aggregates in the >2 mm class, aggregates in the 2-1 mm class and organic matter of an Oxisol under culture of the sugarcane. Samplings of the soil in regular intervals of 10 m, in grid form, totaling 100 points, collected in the depths of 0.0-0.2 m and 0.2-0.4 m were made. Data were submitted to descriptive statistics, geostatistics and in sequence to kriging analyzes. Values of the variation coefficient were low for organic matter in the depth of 0.0-0.2 m, mean in the depth of 0.2-0.4 m, high for geometric medium diameter and mean for aggregates in the >2 mm class, aggregates in the 2-1 mm class in all studied depths. The occurrence of space dependence was observed for all the variables, and the largest ones were observed in the depth of 0.0-0.2 m. Small variations in the forms of the relief condition spatial variability differentiated for organic matter and stability of aggregates in the studied depths.

Tolerância de perdas de solo na bacia do rio Itiquira, Mato Grosso, Brasil

The geographic area of the present study corresponds to the basin of the Itiquira river high course (Figure 1), in the portion that extends from the tributaries of its source, in the east of the plateau Correntes/Itiquira, in the neighbourhoods the city of Alto Garç as, to the scarp of the São Jerônimo mountain range, toward the west of Itiquira, in the state of Mato Grosso, totalizing 5,361 km 2. The area is placed in the eastern part of the Alto Paraguai basin, in the western portion of the Paraná Sedimentary Basin plateau. Through GIS techniques, it was possible to asses total soil losses from the Itiquira river basin, considering the years of 1966, 1985 and 1996, being based on the Universal Soil Loss Equation. Thus, in 1966 the basin lost 201,546.94 ton of soil, with an average loss of 0.37 ton/ha/year. Considering that the total area of the Itiquira river basin is of 536,100 ha, while in 1985 the soil losses had passed to 1,760,833.40 ton, with an increase of approximately 8.5 times. The average of soil losses in 1985 was of 3.28 ton/ha/year. In 1996 the basin lost 1,662,043.24 ton, with a reduction of only 9.4% in relation to 1985 but, in relation the 1966, the increase continued in the order of 8 times. The average losses per hectare in this year was in the order of 3.10 ton/ha/year (Chart 1). The map of potential of the laminar erosion for 1966 (Figure 3), shows to the highest values in small areas, situated in the northeast of the area, in Alto Garças, with values between 10 the 20 ton/ha/year and some spots in sources of the Itiquira and Ariranha rivers, with values between 1 the 5 ton/ha/year. In a general way, however, the area presents low soil loss for laminar erosion in this year, with inferior values to 1 ton/ha/year. The higher class of erosion, over 10 ton/ha/year, occupied 2,947 ha in 1966. In the year of 1985 (Figure 4), the erosive process spread over the entire studied area, and the class of erosion over of 10 ton/ha/year, already started to occupy 78,437 ha, implying an increase of approximately 27 times in 19 years. A strong increment in the erosive process was noticed in the western part of the area, to along the BR-163 road, exactly where great areas of natural vegetation (open pasture) had been transformed in culture and pasture areas. In the north-eastern part of the area it was also noticed an increment in the erosive process in agreement with the increase of culture areas and reduction of the natural areas, but it was not of so intense form as in the western portion of the area. In the year of 1996 (Figure 5), the class of erosion over of 10 ton/ha/year had diminished for a total of 53.499 ha noticing a retraction of the erosive process in the western part of the area, alongside the BR-163 road. On the other hand, it occurred a strong increment in the northern part of the area, in the neighbourhoods of the city of Alto Garças, alongside the BR-364 road and part of the MT-040 road. In a general way, in the outskirts of the city of Itiquira, in the central part of the area, it was verified an increase of the amount of zones with erosion between 0-1 ton/ha/year, passing to the immediately superior class, of 1-3 ton/ha/year; scarce data of hydrosedimentology in the UHE Itiquira (1999), shows good agreement with the values gotten for the EUPS (Chart 2). Based on the hydric classification proposal for FAO (1967) (Chart 3), it is noticed that areas with high degree of erosion (> 50) in the analysed area are very restricted, occupying 493 ha in 1985 and 332 ha in 1996 (Chart 4). In 1996 appeared as isolated spots in the north of Itiquira and Alto Garças, however beyond limits of the Itiquira river basin. These areas require special cares in its use as agricultural areas. Aiming at identifying and indicating the areas of potential risk of erosion and that need implementation of conservation practices, it was elaborated the map of limit of tolerance to the soil losses. In 1966 (Figure 6), areas with soil losses over of the tolerable were restricted to small spots located in the eastern part of the area, occupying 0.43% of the total of the area; already in 1985 (Figure 7), this percentage passed to 5.86%, spreading for all the area; in 1996 (Figure 8) it is observed a fast reduction of the areas with soil losses over of the tolerance limit, passing 5.43% of the total of the area. All the areas with losses over of the tolerable value must be considered as risk areas and were done in these areas studies for implementation of conservation practices.

Quantum topology change and large-N gauge theories

We study a model for dynamical localization of topology using ideas from non-commutative geometry and topology in quantum mechanics. We consider a collection X of N one-dimensional manifolds and the corresponding set of boundary conditions (self-adjoint extensions) of the Dirac operator D. The set of boundary conditions encodes the topology and is parameterized by unitary matrices g. A particular geometry is described by a spectral triple x(g) = (A X, script H sign X, D(g)). We define a partition function for the sum over all g. In this model topology fluctuates but the dimension is kept fixed. We use the spectral principle to obtain an action for the set of boundary conditions. Together with invariance principles the procedure fixes the partition function for fluctuating topologies. The model has one free-parameter β and it is equivalent to a one plaquette gauge theory. We argue that topology becomes localized at β = ∞ for any value of N. Moreover, the system undergoes a third-order phase transition at β = 1 for large-N. We give a topological interpretation of the phase transition by looking how it affects the topology. © SISSA/ISAS 2004.

Recycling of silicon carbide and corn starch as binder originating from commercial starch consolidation

The main goal of this work is to demonstrate that the use of recycled material originated from SiC ceramics is viable. These ceramics were produced by commercial starch consolidation process. Before calcination stage, surplus of these materials always appears. This surplus is rich in SiC and starch. Samples were made by material previously milled in automatic mortar and sieved (100 Tyler). Later, 10% of distilled water was added to the material and the mixture was pressed at 40 MPa. In order to characterize the ceramic, three point flexural test were made, according to the ASTM C1161/94 norm. The results were analyzed by Weibull statistical method. Apparent density and porosity measures also were made, according to ASTM C20/87 norm. A verification of the surface was made in the fracture area by the depth from focus method and SEM image analysis. The results showed that the recycling process is fully viable, being a good economic option and reduce possible pollutant effect to the environment.

Anelastic spectroscopy in TiO2

Titanium dioxide (rutile) has a lot of interesting and useful features and hence is widely utilized for application. It has been used as white pigment, photocatalyst, biocompatible material and semiconductor material used in solar battery. In semiconducting TiO2 oxygen vacancies are said to play an important role in the electrical conduction. Measurements of the elastic energy loss and modulus (anelastic spectroscopy) as a function of temperature can distinguish among the different atomic jumps, which occur in the various phases or at different local ordering. In this paper, it is reported anelastic relaxation measurements in TiO2 samples using a torsion pendulum operating in frequencies around 40Hz, in the temperature range between -173°C to 330°C with heating rate of 1°C/min. The results shown a reduction in the elasticity modulus with the increase in the corn starch content used for this consolidation.

Anelastic spectroscopy in Al2O3

Engineering ceramics have found use in many applications, such as engine parts, ball bearings, artificial bone and hip replacements and gyroscopes, because of their good chemical inertness, hardness, high temperature stability and excellent wear resistance. Oxide ceramic may meet these demands. Alumina (Al2O3) ceramics offer a high potential for many engineering applications, such as wear- and/or corrosion-resistant components, and as material for substrates or housings in microelectronic devices. Alumina is used among other things for seal ring, draw-cones, guides, water mixing tapes, bearing parts, medical prostheses and cutting tools. Measurements of the elastic energy loss and modulus (anelastic spectroscopy) as a function of temperature can distinguish among the different atomic jumps, which occurs in the various phases or at different local ordering. In this paper, it is reported anelastic relaxation measurements in Al2O3 samples using commercial starch. These measurements were carried out in a torsion pendulum operating in frequencies around 40 Hz. The results shown strongly influence of the type of forming in the elastic modulus obtained by anelastic relaxation measurements.

Anelastic spectroscopy in superconducting oxides

Since the discovery of the high Tc superconductors, several works have been made about the different properties of these materials. Anelastic spectroscopy experiments are sensitive tools to the study of defects in solids and phase transitions. By this technique, we can distinguish the different types of atomic jumps that happen to different temperatures. The intensity of the peaks in the anelastic spectrum and the step in the torsional modulus are related with the concentration of the relaxing entities, and the position of the peaks is determined by its mobility. In this paper, the study on Bi and Sm based superconducting oxides was made by anelastic relaxation measurements using a torsion pendulum. The samples were submitted to successive thermal treatments in high vacuum, in the temperature range between 100 K and 650 K, heating rate about 1 K/min. For Bi based superconducting oxides the results shown two peaks, that were associated to interstitial oxygen mobility and to orthorhombic to monoclinic phase transition. For Sm based superconducting oxides the results shown a relaxation peak that was attributed to the jumps of the oxygen atoms in the inter-chains O1 and 05 of the lattice.

Evaluation of procera/porcelain interface in metal-free prosthesis

Prosthetic substructures for dental application are veneered by porcelain comprising a structure with different elastic modulus and thermal expansion coefficients layers. This structure may present residual stresses in different layers leading to crack propagation and delamination. Although veneering porcelain remains basically on same strength than standard feldspathic porcelains, new ceramic cores have been developed with higher mechanical properties overcoming metal substructures, improving esthetics and biocompatibility. The interface between the Procera dense sintered alumina core and the manufacturer recommended veneering porcelain (AllCeram-Degussa) were evaluated using SEM in coping shaped specimen simulating the standard dental preparation. There were neither crack presences at the interface nor porcelain delamination.

Synthesis and characterization of 0.9PMN-0.1PT powders by the use of a modified columbite precursor

The complex perovskite compound 0.9PbMg 1/3Nb 2/3O 3-0.1PbTiO 3 is one of the most promising relaxor ceramic because the addition of lead titanate increases T m, by about 5°C/mol% from intrinsic T m value for pure PMN (near -7 to -15°C). A Ti-modified columbite precursor was used to prepare PMN-PT powders containing single perovskite phase. This variation on columbite route includes Ti insertion in MgNb 2O 6 orthorhombic structure so that individual PT synthesis becomes unnecessary. Furthermore, effects of Li additive on columbite and PMN-PT structures were studied by XRD to verify the phase formation at each processing step. XRD data were also used for the structural refinement by Rietveld method. The additive acts increasing columbite powders crystallinity, and the amount of perovskite phase was insignificantly decreased by lithium addition. By SEM micrographs it was observed that Li presence in PMN-PT powders leads to the formation of rounded primary particles and for lmol% of additive, the grain size is not changed, different from when this concentration is enhanced to 2mol%.

Physical characterization of K-doped 0.9PMN-0.1PT synthesized by an association of the columbite route and the polymeric precursor method

The solid solution 0.9PbMg 1/3Nb 2/3O 3-0.1PbTiO 3 is one of the most widely investigated relaxor ceramic, because of its high dielectric constant and low sintering temperatures. PMN-PT powders containing single perovskite phase were prepared by using a Timodified columbite precursor obtained by the polymeric precursor method. Such precursor reacts directly with stoichiometric amount of PbO to obtain pyrochlore-free PMN-PT powders. The structural effects of K additive included in the columbite precursor and 0.9PMN-0.1PT powders were also studied. The phase formation at each processing step was verified by XRD analysis, being these results used for the structural refinement by the Rietveld method. It was verified the addition of K in the columbite precursor promotes a slight increasing in the powder crystallinity. There was not a decrease in the amount of perovskite phase PMN-PT for 1mol% of K, and the particle and grain size were reduced, making this additive a powerful tool for grain size control.

Immature development in the tramp species ant Paratrechina longicornis (Hymenoptera, formicidae)

The genus Paratrechina (Motschulsky) is composed of about 147 cosmopolitan ant species and subspecies, of which some were accidentally spread by commerce around the world, infesting houses and hospitals. In Brazil, two species are of remarkable economic importance: Paratrechina fulva (Mayr) and Paratrechina longicornis (Latreille). The present paper aims to report the following aspects on the biology of P. longicornis: number of larval instars, growth rates, duration and viability of the developmental stages and some observations on brood-care behaviour. Artificial colonies were kept under controlled temperature (25±2°C) and relative humidity (60±10%) conditions. To access the number of larval instars, we analyzed 1531 larvae fixed in Dietrich by measuring their maximum head capsule widths. We analysed ten artificial colonies daily to measure the developmental time and viability of immatures. We found P. longicornis presented three larval instars and a mean growth ratio of 1.2988. Egg stage was found to last 16.1 ±0.1 days, with a viability of 24.6%; larval stages were found to last 18.3±0.1 days, with a viability of 33.3% and the pupal stage was found to last 12.3±0.1 days, with a viability of 65.3%.

Contexto geológico e estrutural do Maciço Rio Apa, sul do Cráton amazônico - MS

Rio Apa Massif crops out in the Mato Grosso do Sul state and corresponds to the southeastern portion of the Amazonian Craton dominantly Paleoproterozoic in age. Rio Apa Complex is oldest and it is composed mainly by migmatitic orthogneisses, beyond amphybolites, tonalities and granodiorite. Alto Tererê Group is composed by schists, biotitemuscovite gneisses and micaceous quartzites generally rich in garnets, beyond metabasic rocks of low amphibolite facies. The Amoguijá Group is constituted by Alumiador Intrusive Suite, which is represented by a sieno to monzogranitic batholith and Serra da Bocaina Volcanic Suite composed of volcanoclastic rocks of alkali riolites to monzoriolites compositions and pyroclastic products. Overlaying towards East and South occurs Neoproterozoic metasedimentary rocks from the Paraguai Folded Belt (Cuiabá, Corumbá and Jacadigo Groups - Urucum Formation). Structural-metamorphic framewok is identified by five deformational phases but the actual tectonic and metamorphic structure shows the superposed tectonic array of the Paraguai Folded Belt. Rocks from Rio Apa Complex, Alto Tererê Group and Amoguijá Group record an older structural evolution defined by (Dn-1 and Dn). The deformational phases (Dn+1 and Dn+2) are visible mainly in rocks of Paraguai Folded Belt beyond the last deformation (Dn+3) that imprints all sequences.

Variação genética para caracteres silviculturais e anatômicos da madeira em progênies de Myracrodruon urundeuva (Engler) Fr. Allem

The aims of this study were to evaluate the variation and to estimate genetic parameters for silvicultural anatomic wood traits for genetic breeding of a Myracrodruon urundeuva (Engler) Fr. Allem, population from Selvíria-MS. For this, from samples of a progeny test established in the Fazenda de Ensino, Pesquisa e Extensão da Faculdade de Engenharia de Ilha Solteira/UNESP, macroscopic anatomic wood traits of M. urundeuva (tangential diameter and vases frequency per mm2) and growth traits were measured (height, DBH and stem form). Genetic parameters were estimated in 28 open-pollinated progenies, in three replications and 10 plants per plot, using a REML/BLUP approach. Between the analysed traits, the DBH is the most indicated for selection for timber production, because it presented the highest values of coefficient of genetic variation, heritabilities and selective accuracy. Between the anatomic traits, the vessels frequency in the pith showed the highest values for genetic parameters. For pulp yield, based on the multi-effect index, the strategy of selecting the best trees for vessels frequency in the pith, independent of the progeny, permitted to obtain substantial gains by mass selection, without progeny test.