Annual variations in fecal androgen metabolites and antler cycle of captive red brocket bucks (Mazama americana) in southeast Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diversity and structure of Ephemeroptera, Plecoptera and Trichoptera (Insecta) assemblages from riffles in mountain streams of Central Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effect of thermal cycles on the mechanical properties of fiber-metal laminates

The effect of thermal-shock cycles on the mechanical properties of fiber-metal laminates (FMLs) has been evaluated. FML plates were composed by two AA2024 Al sheets (1.6 mm thick) and one composite ply formed by two layers of unidirectional glass fiber epoxy prepreg and two layers of epoxy adhesive tape of glass fiber reinforced epoxy adhesive. The set was manufactured by hand layup and typical vacuum bag technique. The curing cycle was in autoclave at 125 +/- 5 degrees C for 90 min and an autoclave pressure of 400 kPa. FML coupons taken from the manufactured plate were submitted to temperature variations between -50 and +80 degrees C, with a fast transition between these temperatures. Tensile and interlaminar shear strength were evaluated on samples after 1000 and 2000 cycles, and compared to nonexposed samples. 2000 Cycles corresponds to typical C Check interval for commercial aircraft maintenance programs. It was observed that the thermal-shock cycles did not result in significant microstructural changes on the FML, particularly on the composite ply. Similarly, no appreciable effect on the mechanical properties of FML was observed by the thermal-shock cycles. (c) 2012 Elsevier Ltd. All rights reserved.

Canine trypanosomiasis: etiology of infection and implications for public health

Canine trypanosomiasis, caused by protozoans of the genus Trypanosoma, is divided into two primary types: the American form (Chagas disease), due to Trypanosoma cruzi infection, and the African form (sleeping sickness or surra), provoked by Trypanosoma evansi. This disease was originally enzootic and affected only wild animals, including mammals and birds, which served as reservoirs. Later, it spread to domestic animals such as horses, cattle and dogs. The disease became a zoonosis when contact between rural inhabitants and natural Trypanosoma foci occurred, due to ecological imbalances and increasing migration. Dogs are significantly involved in this context, because they are the main domestic animals and participate in the transmission and maintenance cycles of these parasites. This article reports etiological, epidemiological and public health aspects of canine trypanosomiasis, and the most important peculiarities of this zoonosis in dogs.

The efficacy of a single chain recombinant equine luteinizing hormone (reLH) in mares: Induction of ovulation, hormone profiles, and inter-ovulatory intervals

The objectives of this study were to determine the efficacy of recombinant equine luteinizing hormone (reLH) in shortening the time to ovulation in cycling mares and to determine the effects of treatment on endogenous hormones and inter-ovulatory intervals. In study 1, mares of light horse breeds (3-20 years) were treated with either a vehicle, various doses of reLH, or human chorionic gonadotropin (hCG). Cycling mares were examined by palpation and ultrasound per rectum daily or every 12 h from the time of treatment to ovulation. In studies 2 and 3, jugular blood samples were collected daily or every 12 h from the time of treatment to ovulation for analysis of LH, follicle stimulating hormone (FSH), estradiol-17 beta (E-2), and progesterone (P-4) by radioimmunoassays (RIA). Increasing doses of reLH (0.3, 0.6, 0.75, and 0.9 mg) showed increasing effectiveness at inducing ovulation within 48 h of treatment. Treatments with the 0.75 and 0.9 mg doses of reLH resulted in 90% and 80% ovulation rates, which were similar to hCG treatment (85.7%). Except for the early rise in LH after treatment with 0.5, 0.65, and 1.0 mg of reLH, hormone profiles appeared to be similar between control and treated cycles. Inter-ovulatory intervals were similar between control and treatment cycles. In conclusion, reLH is a reliable and effective ovulatory agent that does not significantly alter endogenous hormone profiles or affect inter-ovulatory intervals.(c) 2007 Elsevier B.V. All rights reserved.

Effect of microwave irradiation and water storage on the viscoelastic properties of denture base and reline acrylic resins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Disinfection of Bovine Enamel by Microwave Irradiation: Effect on the Surface Microhardness and Demineralization/Remineralization Processes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphogenetic and tillering dynamics in Tanzania grass fertilized and non-fertilized with nitrogen according to season

The objectives of this study were to evaluate morphogenetic characteristics and tillering dynamics in Tanzania grass fertilized and non-fertilized with nitrogen, under intermittent grazing, in the spring and the summer. The main plots were composed of four nitrogen rates (0, 100, 200 and 300 kg/ha) and the subplots were growth seasons: spring (October, November and December) and summer (January, February and March). The experimental design was of randomized block with plots subdivided by time (seasons of the year) and four replications. Urea was used as nitrogen supply and was divided into two applications: one in the spring and another in the summer. The experimental units fertilized with N rates of 200 and 300 kg/ha showed six cycles of pasture, with an average of 27 days of pasture interval, while the treatments with no fertilization and 100 kg/ha of N showed only four and five cycles of pasture, respectively. Leaf elongation rate (LER) and the leaf appearance rate (LAR) increased linearly with increasing of N rates. The greatest population density occurred in summer with the higher nitrogen rates. The treatment without N fertilization showed the lowest growth of tiller population, while the other treatments exhibited growth rates above 50% when compared with non-fertilized samples. Nitrogen rates significantly affect the leaf appearance rate and the leaf elongation rate, as well as the number of live leaves in plants of Tanzania grass in both spring and summer.

Evaluation of varying amounts of thermal cycling on bond strength and permanent deformation of two resilient denture liners

Statement of problem. Two problems found in prostheses with resilient liners are bond failure to the acrylic resin base and increased permanent deformation due to material aging.Purpose. This in vitro study evaluated the effect of varying amounts of thermal cycling on bond strength and permanent deformation of 2 resilient denture liners bonded to an acrylic resin base.Material and methods. Plasticized acrylic resin (PermaSoft) or silicone (Softliner) resilient lining materials were processed to a heat-polymerized acrylic resin (QC-20). One hundred rectangular specimens (10 X 10-mm(2) cross-sectional area) and 100 cylindrically-shaped specimens (12.7-mm diameter X 19.0-mm height) for each liner/resin combination were used for the tensile and deformation tests, respectively. Specimen shape and liner thickness were standardized. Specimens were divided into 9 test groups (n=10) and were thermal cycled for 200, 500, 1000, 1500, 2000, 2500, 3000, 3500, and 4000 cycles. Control specimens (n=10) were stored for 24 hours in water at 37degreesC. Mean bond strength, expressed as stress at failure (MPa), was determined with a tensile test using a universal testing machine at a crosshead speed of 5 mm/min. Analysis of failure mode, expressed as a percent (%), was recorded as either cohesive, adhesive, or both, after observation. Permanent deformation, expressed as a percent (%), was determined using ADA specification no. 18. Data from both tests were examined with a 2-way analysis of variance and a Tukey test (alpha=.05).Results. For the tensile test, Softliner specimens submitted to different thermal cycling regimens demonstrated no significantly different bond strength values from the control; however, there was a significant difference between the PermaSoft control group (0.47 +/- 0.09 MPa [mean +/- SD]) and the 500 cycle group (0.46 +/- 0.07 MPa) compared to the 4000 cycle group (0.70 +/- 0.20 MPa) (P<.05). With regard to failure type, the Softliner groups presented adhesive failure (100%) regardless of specimen treatment. PermaSoft groups presented adhesive (53%), cohesive (12%), or a combined mode of failure (35%). For the deformation test, there was no significant difference among the Softliner specimens. However, a significant difference was observed between control and PermaSoft specimens after 1500 or more cycles (1.88% +/- 0.24%) (P<.05).Conclusions. This in vitro study indicated that bond strength and permanent deformation of the 2 resilient denture liners tested varied according to their chemical composition.

Locomotor and metabolic activities of Gymnostreptus olivaceus (Diplopoda, Spirostreptida) at different photoperiod conditions

In the present investigation the locomotor and the metabolic activity of Gymnostreptus olivaceus were studied, using 24-hr cycles at different photoperiods and constant temperature and RH. Locomotor activity was studied by the actography method and was reported as coefficients of nocturnalism [CN (N/N + D). 100]. The results showed a nocturnalism coefficient of 98,71% under normal photoperiod conditions and of 29,58% under inverted photoperiod conditions. In constant illumination, the CN of G. olivaceus was 88,22%, and in constant darkness, its rhythm was close to that of the normal photoperiod (CN = 94,92%). The metabolic activity was studied by manometric Warburg respirometry and lit was reported as mu l O-2 . g(-1). h(-1). The respiratory rate of G. olivaceus under normal photoperiod condition was higher at night than during the day (52,52 x 28,76), coinciding with the pattern of nocturnal locomotor activity of the animal. However, under conditions of inverted photoperiod, the millipede maintained its tendency toward a more intense nocturnal respiratory rate (50,35 x 39,14). Similar behaviours were observed under constant illumination and constant darkness, in which G. olivaceus again presented higher nocturnal respiratory rates than diurnal ones(85,84 x 53,48 and 73,18 x 57,0, respectively). The present experimental data suggests the persistence of an endogenous rhythm where the light may not be an important exogenous synchronizer of the activity of G. olivaceus, because it was insufficient to block the start of the biological clock and the natural tendency of higher nocturnal activities of millipedes, principally when the tests were performed in constant illumination or darkness (free-running tests).

Biocompatibility of denture base acrylic resins evaluated M culture of L929 cells. Effect of polymerisation cycle and postpoymerisation treatments

Objective: the purpose of this study was to evaluate the effect of two post-polymerisation treatments and different cycles of polymerisation on the cytotoxicity of two denture base resins.Materials and methods: the resins tested were Lucitone 550 and QC 20. Discs of resins were fabricated following the manufacturer's instructions. Lucitone 550 was processed by long cycle or short cycle. The resin QC 20 was processed by reverse cycle or normal cycle. The specimens were divided into groups: (i) post-polymerised in microwave for 3 min at 500 W; (ii) post-polymerised in water-bath at 55 degrees C for 60 min and (iii) without post-polymerisation. Eluates were prepared by placing three discs into a sterile glass vial with 9 ml of Eagle's medium and incubated at 37 degrees C for 24 hours. L929 cells were seeded into 96 3 well culture plates and DNA synthesis was assessed by H-thymidine incorporation assay.Results: the results were submitted to two-way ANOVA and Tukey HSD test. QC 20 specimens polymerised by the normal cycle and submitted to microwave post-polymerisation were graded as moderately cytotoxic. Similar results were observed for Lucitone 550 processed by long cycle without post-polymerisation. The other experimental groups were graded as not cytotoxic. After water-bath post-polymerisation, specimens of Lucitone 550 processed by long cycle produced significantly lower inhibition of DNA synthesis than the other groups.Conclusion: the long cycle increased the cytotoxicity of Lucitone 550 and water-bath post-polymerisation reduced the cytotoxicity of Lucitone 550 processed by long cycle.

Effect of microwave sterilization and water storage on the Vickers hardness of acrylic resin denture teeth

Statement of problem. Acrylic resin denture teeth soften upon immersion in water, and the heating generated during microwave sterilization may enhance this process.Purpose. Six brands of acrylic resin denture teeth were investigated with respect to the effect of microwave sterilization and water immersion on Vickers hardness (VHN).Material and Methods. The acrylic resin denture teeth (Dentron [D], Vipi Dent Plus [V], Postaris [P], Biolux [B], Trilux [T], and Artiplus [A]) were embedded in heat-polymerized acrylic resin within polyvinylchloride tubes. For each brand, the occlusal surfaces of 32 identical acrylic resin denture posterior teeth were ground flat with 1500-grit silicon carbide paper and polished on a wet polishing wheel with a slurry of tin oxide. Hardness tests were performed after polishing (control group, C) after polishing followed by 2 cycles of microwave sterilization at 650 W for 6 minutes (MwS group), after polishing followed by 90-day immersion in water (90-day Wim group), and after polishing followed by 90-day storage in water and 2 cycles of microwave sterilization (90-day Wim + MwS group). For each specimen, 8 hardness measurements were made and the mean was calculated. Data were analyzed with a 2-way analysis of variance followed by the Bonferroni procedure to determine any significance between pairs of mean values (alpha=.01).Results: Mircrowave sterilization of specimens significantly decreased (P <.001) the hardness of the acrylic resin denture tooth specimens P (17.8 to 16.6 VHN, V (18.3 to 15.8 VHN), T (17.4 to 15.3 VHN), B (16.8 to 15.7 VHN), and A (17.3 to 15.7 VHN). For all acrylic resin denture teeth, no significant differences in hardness were found between the groups Mws, 90-day Wim, and 90-day Wim + MwS, with the exception of the 90-day Wim + MwS tooth A specimens (14.4 VHN), which demonstrated significant lower mean values (P <.001) than the 90-day Wim (15.8 VHN) and MwS (15.7 VHN) specimens.Conclusions. For specimens immersed in water for 90 days, 2 cycles of microwave sterilization had no effect on the hardness of most of the acrylic resin denture teeth.

Morphological Characterization of the Testicular Cells and Seminiferous Epithelium Cycle in Six Species of Neotropical Bats

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reproductive biology and moulting cycle of the crab Callinectes ornatus (Decapoda, Portunidae) from the Ubatuba region, Sao Paulo, Brazil

To investigate the reproductive biology of Callinectes ornatus gonadal and moulting cycles were studied over two consecutive years in the Ubatuba region. Six stages of gonadal development were detected in females and four in males. Observations on the number of ovigerous females, on the moulting stages of males and females, and on the percentage of individuals exhibiting mature gonads reveal a continuous reproductive cycle, the stages of which progress at different rates. These data support the hypothesis that C. ornatus shows staggered spawning, with possibly more than one annual reproductive period. A pause in growth before the terminal moult may occur in this species.

Antenatal corticosteroid use and clinical evolution of preterm newborn infants

Objectives: To describe the use of antenatal corticosteroid and clinical evolution of preterm babies. Methods: An observational prospective cohort study was carried out. All 463 pregnant women and their 514 newborn babies with gestational age ranging from 23 to 34 weeks, born at the Brazilian Neonatal Research Network units, were evaluated from August 1 to December 31, 2001. The data were obtained through maternal interview, analysis of medical records, and follow-up of the newborn infants. Data analysis was performed with the use of chi-square, t Student, Mann-Whitney, and ANOVA tests and multiple logistic regression, with level of significance set at 5%. Results: Treatment was directly associated with the number of prenatal visits, with maternal hypertension and with the antenatal use of tocolytic agents. Babies from treated pregnant women presented better Apgar scores at the 1st and 5th minute, reduced need for intervention in the delivery room and lower SNAPPE II. They were born with higher birth weight, longer gestational age and needed less surfactant use, ventilation, and oxygenation time. After multiple logistic regression, the use of antenatal corticosteroid independently improved birth conditions, decreased ventilation time, being related to increased occurrence of neonatal sepsis. Conclusions: The use of corticosteroid was associated with better prenatal care and birth conditions, better preterm evolution but higher risk of infection. Copyright © 2004 by Sociedade Brasileira de Pediatria.