Early social environment and the fighting behaviour of young Oreochromis niloticus (Pisces, Cichlidae)

This study examines the influence of early experience with different forms of aggressive behaviour on the fighting behaviour of young fish. Fry of the cichlid fish, Oreochromis niloticus, were raised from hatching in small groups consisting of a normal individual (the test fish) and either mutant conspecifics lacking the dorsal fin and thereby the ability to perform fin displays, or normal ones. Following a 63-day period of development in groups the test fish were confronted in their home tanks with an unfamiliar normal fish for 10 min. The fighting behaviour of the test fish was analyzed considering their previous group type (mutant or normal) and rank (alpha or beta). There was no difference between test fish in the rate and sequence of behaviour patterns used in fighting. However, test fish that had developed in mutant groups were rarely the first to bite in contests and had a longer latency to biting following the first bite of the stimulus fish than rest fish with normal experience. This finding is attributable to the form of aggressive behaviour experienced by the test fish during development but not to existing differences in the amount of aggression previously experienced, nor to previous rank, sex, or size relative to the stimulus fish. The results suggest that early experience influenced decision making by the test fish during the fight. The involvement of the fin displays and the possible mechanism of this influence are discussed.

Eye color as an indicator of social rank in the fish Nile tilapia

We investigated the association of eye color with the dominant-subordinate relationship in the fish Nile tilapia, Oreochromis niloticus. Eye color pattern was also examined in relation to the intensity of attacks. We paired 20 size-matched fish (intruder: 73.69 ± 11.49 g; resident: 75.42 ± 8.83 g) and evaluated eye color and fights. These fish were isolated in individual aquaria for 10 days and then their eye color was measured 5 min before pairing (basal values). Twenty minutes after pairing, eye color and fights were quantified for 10 min. Clear establishment of social hierarchy was observed in 7 of 10 pairs of fish. Number of attacks ranged from 1 to 168 among pairs. The quartile was calculated for these data and the pairs were then divided into two classes: low-attack (1 to 111 attacks - 2 lower quartiles) or high-attack (112 to 168 attacks - 2 higher quartiles). Dominance decreased the eye-darkening patterns of the fish after pairing, while subordinance increased darkening compared to dominance. Subordinate fish in low-attack confrontations presented a darker eye compared to dominant fish and to the basal condition. We also observed a paler eye pattern in dominants that shared low-attack interactions after pairing compared to the subordinates and within the group. However, we found no differences in the darkening pattern between dominants and subordinates from the high-attack groups. We conclude that eye color is associated with social rank in this species. Moreover, the association between eye color and social rank in the low-attack pairs may function to reduce aggression.

Attractiveness of different sweet and fatty substances to three neotropical tramp ant species (Hymenoptera : Formicidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Time-course of photosynthetic induction in four tropical woody species grown in contrasting irradiance habitats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrolytic treatment applied to the industrial effluent containing persistent wastes monitored by Bartha respirometric assays

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Correlates of session-rate of perceived exertion (RPE) in a karate training session

Objective. The aim of this study was to analyze the relationships between the rate of perceived exertion (RPE) of a whole exercise session (RPE-S) and objective measures of exercise intensity during a karate training session.Methods. Eight well-trained karate athletes performed a single training session involving basic karate techniques and sparring. Heart rate (HR) was continuously monitored, while blood lactate ([lac]13) and rating of perceived exertion using the Borg's 6-20 scale were taken each 10-min during exercise. Athletes were also asked to rate their RPE-S using a modified CR-10 scale 30-min after exercise.Results. Significant relationships (P<0.05) were found between RPE-S and mean values of %HRmax (r(p) = 0.91), %HR reserve (r(p) = 0.87), [lac]b(r(p) = 0.96), and RPE (r(p) = 0.78) during the session, but not between RPE-S and the duration of exercise bout (r(s) = 0.28; P > 0.05). RPE-S was also significantly related (P < 0.05) to percentage of time sustained under ventilatory thresold (VT) (r(p) = 0.96), between VT and respiratory compensation point (RCP) (r(p) = 0.93) and above RCP (r(p) = 0.96).Conclusion. These results suggest RPE-S to be a valid tool for assessing interindividual variations in global exercise intensity during karate training. (C) 2010 Elsevier Masson SAS. All rights reserved.

Lumbar muscles recruitment during resistance exercise for upper limbs

The aim of this study was to evaluate the EMG activity of lumbar multifidus (MU), longissimus thoracis (LT) and iliocostalis (IC) muscles during an upper limb resistance exercise (biceps curl). Ten healthy males performed maximal voluntary isometric contraction (MVC) of the trunk extensors, after this, the biceps curl exercise was executed at 25%, 30%, 35% and 40% one repetition maximum during 1 min, with 10 min rest between them. EMG root mean square (RMS) and median frequency (MFreq) were calculated for each lifting and lowering of the bar during the exercise bouts, to calculate slopes and intercepts. The results showed increases in the RMS and decreases in the MFreq slopes. RMS slopes were no different between muscles, indicating similar fatigue process along the exercise irrespective of the load level. MU and LT presented higher RMS irrespective of the load level, which can be related to the specific function during the standing position. on the other hand, IC and MU presented higher MFreq intercepts compared to LT, demonstrating possible differences in the muscle fiber conduction velocity of these muscles. These findings suggest that trunk muscles are differently activate during upper limb exercises, and the fatigue process affects the lumbar muscles similarly. (C) 2008 Elsevier Ltd. All rights reserved.

Effect of water renewal on dominance hierarchy of juvenile Nile tilapia

RECAW - CNPq

Social isolation and aggressiveness in the Amazonian juvenile fish Astronotus ocellatus

Testamos o efeito do isolamento social sobre a agressividade no peixe amazônico, Astronotus ocellatus. Dez peixes juvenis foram transferidos de um aquário de agrupamento (60 x 60 x 40 cm) contendo 15 indivíduos (sem discriminação de sexo) para um aquário de isolamento (50 x 40 x 40 cm). A agressividade foi testada por meio de ataques e exibições direcionadas à imagem do peixe no espelho. O comportamento foi filmado durante 10 min em 4 momentos: 30 min, 1 dia, 5 dias e 15 dias após o isolamento. Nós analisamos a motivação agressiva por meio da latência para início do comportamento agonístico e pela freqüência dos ataques totais e específicos direcionados ao espelho. A latência para o comportamento agonístico reduziu ao longo do isolamento e houve uma tendência de aumento da freqüência de mouth fighting (um ataque de alta intensidade de agressão), mostrando-nos um aumento na motivação agressiva. Os resultados estão de acordo com os encontrados para ciclídeos juvenís de Haplochromis burtoni, mas discordam com os encontrados para Pterophylum scalare (acará bandeira). Sugerimos que o aumento da agressividade em A. ocellatus pode ser mediado pelo efeito de exposição prévia, da residência prévia ou por processos envolvendo reconhecimento de co-específicos.

Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols

Objectives. This study characterized the feldspathic ceramic surfaces after various silanization protocols.Methods. Ceramic bars (2 mm x 4 mm x 10 mm) (N = 18) of feldpathic ceramic (VM7, VITA Zahnfabrik) were manufactured and finished. Before silane application, the specimens were ultrasonically cleaned in distilled water for 10 min. The ceramic specimens were randomly divided into nine groups (N = 2 per group) and were treated with different silane protocols. MPS silane (ESPE-Sil, 3M ESPE) was applied to all specimens and left to react at 20 degrees C for 2 min (G20). After drying, the specimens were subjected to heat treatment in an oven at 38 degrees C (G38), 79 degrees C (G79) or 100 degrees C (G100) for 1 min. Half of the specimens of each group were rinsed with water at 80 degrees C for 15 s (G20B, G38B, G79B, G100B). The control group (GC) received no silane. Attenuated total reflection infrared Fourier transform analysis (ATR FT-IR) was performed using a spectrometer. Thickness of silane layer was measured using a spectroscopic ellip-someter working in the lambda = 632.8 nm (He-Ne laser) at 70 degrees incidence angle. Surface roughness was evaluated using an optical profilometer. Specimens were further analyzed under the Scanning Electron Microscopy (SEM) to observe the topographic patterns.Results. ATR FT-IR analysis showed changes in Si-O peaks with enlarged bands around 940 cm(-1). Ellipsometry measurements showed that all post-heat treatment actions reduced the silane film thickness (30.8-33.5 nm) compared to G20 (40 nm). The groups submitted to rinsing in hot water (B groups) showed thinner silane films (9.8-14.4 nm) than those of their corresponding groups (without washing) (30.8-40 nm). Profilometer analysis showed that heat treatments (Ra approximate to 0.10-0.19 mu m; Rq approximate to 0.15-0.26 mu m) provided a smoother surface than the control group (Ra approximate to 0.48 mu m; Rq approximate to 0.65 mu m). Similar patterns were also observed in SEM images.Significance. Heat treatment after MPS silane application improved the silane layer network. Rinsing with boiling water eliminated the outmost unreacted regions of the silane yielding to thinner film thicknesses. (C) 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

In vitro evaluation of dental bleaching effectiveness using hybrid lights activation

OBJETIVO: Avaliar se fontes de luz aumentam a eficácia do peróxido de hidrogênio na técnica de clareamento profissional. METODOLOGIA: Foram empregados 60 dentes incisivos bovinos, com dimensões coronárias e radiculares padronizadas a partir do limite amelo-cementário, sendo descartada a porção lingual. Os corpos-de-prova (cp) foram limpos em ultra-som por 20 min e a dentina condicionada com H3PO4 a 38% por 15 s, sendo os (cp) imersos em solução de café solúvel a 25% por duas semanas. A dentina foi impermeabilizada com esmalte e os (cp) divididos em 5 grupos, sendo a cor inicial mensurada através do espectofotômetro-EasyShade (VITA). Todos os (cp) receberam três aplicações por 10 min do gel clareador Opalescence Xtra-Boost (Ultradent) conforme segue: Grupo 1 - controle, não recebeu fotoativação, Grupo 2 - ativado com luz halôgena, Grupo 3 - ativado com LED azul/LASER, Grupo 4 - ativado com LED verde/LASER e Grupo 5 - ativado com LED vermelho. Após o clareamento foi mensurada a variação de cor E, a*, b*e L* e as referentes à escala de cor Vita Clássico. Os dados foram submetidos à análise de variância, teste de Tukey e de Dunn (α=5%). RESULTADOS: A diferença geral da cor foi reduzida quando se empregou LED Azul e Luz Halógena, sendo que o desempenho do peróxido de hidrogênio a 38% foi intensificado dependendo da fonte de luz utilizada. A avaliação quantitativa de cor, obtida por espectrofotômetro e pela escala de cor Vita Clássico, foram coincidentes. CONCLUSÃO: O tipo de fonte de luz empregada interfere na eficácia do agente clareador.

Influence of surfactants on the effectiveness of bleaching gels

This study evaluated the influence of surfactants on the effectiveness of 35% hydrogen peroxide (HP) and 10% carbamide peroxide (CP) bleaching gels. One hundred and forty bovine teeth were used, which were stained by immersion in a coffee, red wine, and tobacco mixture for 7 days. At the end of this process, the color measurement at baseline was taken with the Vita Easyshade spectrophotometer. The teeth were divided into seven groups: (a) negative control (NC), (b) positive control for HP (PC-35), (c) HP + Tween 20 (T20-35), (d) HP + laurel sodium sulfate (LSS-35), (e) positive control for CP (PC-10), (f) CP + Tween 20 (T20-10), and (g) CP + laurel sodium sulfate (LSS-10). Group NC was kept in artificial saliva for 21 days. Groups PC-35, T20-35, and LSS 35 received three applications of bleaching gel for 10 min; the process was repeated after 7 days. Groups PC-10, T20-10, and LSS-10 received the gel for 8 h per day for 14 days. After the bleaching process, the final color was measured. The analysis of variance and Tukey tests showed statistically significant differences for the parameters of a dagger L, a dagger b, and a dagger E of the HP gels with surfactant and positive control group (PC-35). Within the limits of this in vitro study, the addition of surfactants to HP bleaching gel increased the bleaching effectiveness.

Microhardness change of enamel due to bleaching with in-office bleaching gels of different acidity

Objective. The aim of this study was to assess the enamel microhardness treated with three in-office bleaching agents, containing 35% hydrogen peroxide with different acidity. Materials and methods. Bovine incisors were divided into three groups that received the following bleaching agents: Whiteness HP, Total Bleach and Opalescence Xtra. Three gel applications/10-min each, totaling 30-min of bleaching treatment, were made on the teeth and activated with a blue LED (1000 mW/470 nm) combined to a LASER (120 mW/795 nm) device (Easy Bleach-Clean Line). Vickers hardness (VH) was evaluated at baseline and after the bleaching procedure. The values of Hardness loss [HNL] (% reduction) were calculated. The two-sample t-test was used for comparison of the HNL of the three bleaching products (5% level of significance). Results. The Opalescence Xtra, which had the lowest pH value (pH = 4.30), showed a significant increase of HNL when compared with Total Bleach bleaching agent, which had the highest pH value (pH = 6.62). Conclusions. The 35% hydrogen peroxide bleaching agents resulted in a reduction in surface enamel microhardness and bleaching with the most acid agent resulted in a significant enamel hardness loss compared to the less acid agent (4.30 vs 6.62). Strategies proposed to reduce the enamel loss after bleaching treatment may include the use of daily fluoride therapy, mouth rinsing (fluoride, milk and sodium bicarbonate solution), fluoride/bicarbonate dentifrices without abrasives, do not toothbrush immediately after bleaching, fluorides and calcium add to bleaching agents.

C programs for solving the time-dependent Gross-Pitaevskii equation in a fully anisotropic trap

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ultrasound effects on invertase from Aspergillus niger

Ultrasound effects on the release and activity of invertase from Aspergillus niger cultivated in a medium containing sucrose and peptone and in another with sugar-cane molasses and peptone were investigated. Irradiation was conducted for periods of 2 - 10 min. with waves of amplitude 20 and 40 using an ultrasound processor of 20 kHz. Product formation was determined as reducing equivalents formed by time units using 3,5-dinitrosalicylic acid. Total and specific activities of the culture supernatants were compared in the presence and absence of sonication. Both amplitudes promoted a significant increase of total invertase activity in the time periods investigated and the highest values were obtained with an amplitude of 20. Ultrasound irradiation caused cell disruption, thus releasing invertase and, after 4 min, activation of the enzyme also occurred. The best conditions for production, extraction and activation of invertase were in molasses medium containing peptone and irradiation with ultrasound waves at 20 for 8 min. This method showed high efficiency for the extraction and activation of invertase from A. niger as well as a great potential for use in industrial processes.