723 resultados para Resistência adesiva na dentina


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Patients that are mechanically ventilated in ICUs are constantly exposed to different pathogens, which present multiantibiotic resistance. Among these microorganisms, is MRSA (Meticillin-Resistant Staphylococcus aureus) considered to be a therapeutic challenge due to its resistance to β-lactam antibiotics. Therefore, this study proposed to identify species of Staphylococcus spp. isolated from mechanically ventilated patients in ICU, the gene mecA detection and the genes of the enterotoxins A (sea), B (seb), C (sec-1) and D (sed) in samples of S. aureus, as well as the phenotypic resistance determination to oxacillin using the disc-diffusion method with discs of oxacillin and cefoxitin. The samples collection occurred during in a period of 19 months, obtaining samples from 232 patients. A percentage of 39% (70) of Gram-positive cocci were found; which 82,8% (58) were identified as Staphylococcus spp,. among these, 75,8% (44) corresponded to S. aureus species and 47,7% were identified as MRSA. It was found resistance to both drugs in 31,8% of the S. aureus samples, 16 (36,3%) had the gene sea and 11 (25%) had the sec-1 gene. Among the coagulase-negative staphylococci obtained, the species most found was S. epidermidis, corresponding to 43% (6). The results revealed that one of the most important etiologic agents of VAP amid the Gram-positive cocci is the species S. aureus, with special attention to MRSA. The presence of enterotoxins genes in S. aureus did not showed determinant role in VAP, but the presence of these superantigens can contribute worsening the patient’s prognosis, since they are associated with intense inflammatory response

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Due to growing concerns for reducing environmental damage caused by the use of non-renewable raw materials, there is a growing demand for research related to aggregate technology with environmental preservation. Thus, the use of non-renewable materials and less aggressive materials has been gaining attention. About composite materials, the exchange of synthetic fibers by natural fibers, especially vegetable fiber as reinforcement, has been increasing, due to its physical-chemical properties such as mechanical strength, nontoxic, low cost, low density, processing flexibility, non-abrasive to the process equipment, requiring simple surface treatments, etc. This objective was to process composites reinforced with long fibers of sapegrass in epoxy matrix and characterize the composites through mechanical tests. Three groups of composites were prepared according to the treatment received by the reinforcement: without treatment, alkali treatment at concentration of 5% w/v and alkali treatment at 10% w/v concentration. The materials were analyzed by tensile and flexural, and tests also optical microscopy and scanning electron microscopy (SEM). The results were statistically analyzed. As the main result, the alkali treatment of 5% in the sapegrass fibers increases the tensile and flexural strength, as a consequence of the improve adhesion between matrix and reinforcement

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Odontologia Restauradora - ICT

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FMVZ

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work of tensile strength was evaluated the efficacy of 4 cements (S. S. White zinc phoshate, Ketac Cem Easymix glass ionomer, RelyX Luting 2 composite resin/glass ionomer and Panavia 21 TC special acrylic resin) used to fix NiCr crowns to usinated titanium alloy abutments. Were used 40 abutments distributed in groups of 10 elements, to each material. The mechanical essays were developed at a MTS 810 universal machine, adjusted to a 0.5 mm/m velocity. The ANOVA applied to data pointed out the existence of significant differences between groups; the subsequent Tukey´s test (p<0.05) also detected significant differences, except at comparisons of phosphate versus RelyX and phosphate versus Ketac Cem. The better performance was presented by Panavia 21 (1,127.996 N); RelyX (478.197 N) showed itself similar only to phosphate (430.662 N), wich had a performance similar to that of Ketac Cem (227.705 N).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Odontologia Restauradora - ICT

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aims to study the Dual-Phase 600 and 780 steels, which are part of technology development project materials for the automotive industry. It is worth underscoring the antagonistic properties as the Dual-Phase steel assemble, high mechanical strength and elongation due its microstructure, ferrite and martensite. These properties are obtained by a intercritical heat treatment which facilitates the formation of a hardness metastable microstructure shaped plates of low carbon steels. The applicability of Dual Phase steel in the structure of vehicles is huge and its production is already on a commercial scale, so the study and development of this material implies lower cost in automobile manufacturing processes. The dual phase steels DP600 and DP780 underwent tensile, hardness and metallographic analysis to evaluate and comparing its properties. The results indicate that the DP780 steel has higher strength and hardness than the DP600 steel and its microstructure consists of martensite higher fraction which accounts for the higher resistance and hardness. However, the DP600 has higher conformability to DP780 steel

Relevância:

20.00% 20.00%

Publicador:

Resumo:

During the retaining wall project in soil reinforced with geogrids and face milling system for segmental blocks is essential to determine the maximum connection resistance between the block and the geogrid. Thus, the aim of this study was to analyze the connection resistance based on ASTM D- 6638-01 between the segmental block model MW of Muros Terrae® company with the geogrids model Fortrac® M 35 / 20x20, Fortrac® M 55 / 30x20, Fortrac® M 80 / 30x20 and Fortrac® M 110 / 30x20 of HUESKER Synthetic GmbH using gravel 1 as a filling material. As a result, the resistance curves were obtained for the four models of geogrids and was described how it fracture. An additional investigation was the average gain connection resistance percentage when it is applied to geogrid a second layer instead of a single layer. The average percentage gains in the connection resistance to the geogrids model Fortrac® M 35 / 20x20, Fortrac® M 55 / 30x20, Fortrac® M 80 / 30x20 and Fortrac® M 110 / 30x20 were, respectively, 63.20 %, 63, 47%, 62.23 % and 51.34 %. Finally, we made a comparative analysis of the results of this study with those obtained by Guimarães (2006), Urashima et. al (2008) and Almeida and Toma (2011) to evaluate which combinations offered higher connection resistance