720 resultados para MANDIBULAR CONDYLE
Resumo:
Objective: evaluate the immediate dental and skeletal changes induced by the Herbst appliance on early treatment of Angle´s Class II malocclusion. Material and Method: several electronic databases such as Scopus, Pub Med, Medline, Cochrane Library, Lilacs and Scielo were searched. The abstracts that fullfilled the selection criteria were selected and those that did not provide enough information about these criteria were selected but the final decision of including them or not on the research, was taken after the complete reading of the article. The selection criteria were: clinical studies with Class II individuals, both male and female, with initial age of 7 to 10 years, treated with the Herbst appliance that analysed the dental and/or skeletal changes evaluated on lateral cephalometric radiographs; researches where the treatment performed did not involve extractions or surgical interventions; studies that included patients without syndromes or health concerns and articles published in English or Portuguese. Results and Conclusions: five articles were selected. The articles showed that significant changes happened in the mandibular sagittal lenght, on facial convexity angle, on maxillo-mandibular relationship, on retroclination of the upper incisors and on distal movement of the upper molars, on proclination of the lower incisors and on extrusion of the lower molars. The appliance exerted a limited effect on the anterior relocation of the maxillary complex and on facial heights. However, more studies about the performance of the Herbst appliance on early treatment of Class II are needed.
Resumo:
The Herbst appliance is currently one of the most used appliances for the correction of Class II division 1 with mandibular retrusion. When used in peak, or just after the peak of growth it can result in some skeletal gain, which is favorable to the correction of anteroposterior discrepancy with effective and stable results. This article aims to report a case of a patient with malocclusion Class II division 1 with mandibular retrusion, associated with maxillary protusion, treated in two stages: with Herbst splint metallic appliance followed by fixed appliance orthodontic treatment.
Resumo:
A má oclusão de Classe II é originária de vários fatores etiológicos e uma das características mais comum desta má oclusão é a retrusão mandibular3, por esse motivo, os aparelhos de avanço mandibular são eleitos para o tratamento e correção desta má oclusão. Um destes aparelhos é o Herbst, que apresenta várias formas de ancoragens na sua confecção10. Tradicionalmente, as bandas eram o sistema de ancoragem mais usado, no entanto, pela alta frequência de quebras as mesmas foram substituídas por esplinte metálico12. Esse aparelho quando confeccionado de cromo cobalto pelo método da prótese parcial removível, apresenta como desvantagens a quantidade de passos laboratoriais e a possível contração do metal, podendo ocasionar a má adaptação da estrutura metálica à boca do paciente. Dessa forma, este artigo apresenta um novo método de confecção do aparelho de Herbst esplinte metálico fundido com uso da Duralay e liga níquel cromo. Esse método diminui os passos laboratoriais, proporciona maior resistência à tração e minimiza a contração da estrutura metálica, pois a resina química Duralay proporciona menor expansão do que a cera2.
Resumo:
Introduction: Ertty System® is an intraoral system of biomechanical forces to move teeth anteroposteriorly. The application of forces on this system results in the distalization of the molar and all lateral segment in the side to be distalized, including premolars and canine, resulting in alveolar bone remodeling. This system is indicated to correct uni- or bilateral maxillary dental Class II malocclusion in permanent dentition both in children and adults. It is contraindicated in case of skeletal asymmetries, protrusion of maxillary and mandibular teeth, skeletal Class II and Class II subdivision malocclusions with mandibular midline deviation. This study describes Ertty System® and presents two clinical cases treated using this system. The two female patients presented with Class II malocclusion subdivision and maxillary midline deviation. Results: It was achieved correct alignment and leveling, Class I dental relation and correction of upper midline. Conclusion: The success and stability of results confirmed diagnosis and treatment adequacy.
Resumo:
The Jasper Jumper appliance was developed as a fixed orthopedic device that is connected to the upper and lower leveling arches to promote the Class II correction by restricting the maxillary growth (headgear effect), mandibular growth inducement (activator effect) and dentoalveolar changes.
Resumo:
Introduction: The orthodontic treatment using lingual brackets has been desired by adult patients for esthetic factors. In this paper it is described the clinical steps of an orthodontic treatment using Incognito™ system, individualized lingual brackets and archwires designed by CAD/CAM technology. Methods: The presented case describes the treatment of a patient with mesofacial growth pattern,Class I malocclusion, with mandibular crowding and diastema between the upper central incisors, treated using 100% individualized lingual brackets. Results: After treatment, the molar relation of Class I was kept, the spaces between upper central incisors were closed and mandibular crowding corrected. Conclusion: This case report demonstrated the efficiency of the new method for lingual orthodontic treatment.
Resumo:
This manuscript describes the use of a tooth indicated for extraction due to orthodontic reasons as an anchorage aid to receive undesirable side effects caused by orthodontic uprighting of a contralateral molar tooth. The mandibular right second molar was mesially tipped as a result of loss of the adjacent first molar. Since the treatment plan involved extraction of the mandibular left first premolar, undesirable side effects associated with the molar uprighting movement were transferred to this tooth. Once the second molar was vertical, the premolar was extracted and the treatment continued. The results suggest that treatment time can be reduced if undesirable orthodontic mechanical side effects can be directed to a tooth whose extraction is indicated.
Resumo:
The primary teeth are essential for bone development and establishment of the arches on occlusion. Thus, the congenitally absence of teeth may trigger a shift in the balance of the occlusion, promoting disharmony in the structures of the maxilla-mandibular system. However, some interventions are possible to be performed in these cases even in pediatric patients, to redirect growth, preventing growth deviations and reestablishing the aesthetic. The aim of this paper is to report the treatment of a 4-year-old child presenting congenitally absence of mandibular central and lateral incisors and maxilla lateral incisors, which consequently compromises aesthetics, occlusal function, and the development and the functional growth of the bones. The oral rehabilitation was performed with an adhesive partial denture, which was able to restore the aesthetic and the occlusal function, therefore being a viable alternative in the treatment of this patient of little age.
Resumo:
Introduction: The configuration and dimensions of the upper airway are determined by anatomical structures such as soft tissues, muscles and craniofacial skeleton, composing or surrounding the pharynx. Anatomical abnormalities of the soft tissues and / or craniofacial skeleton may become more narrow upper airway. The orthognathic surgery, which is used in the correction of dentoskeletal deformities, also causes changes in the upper airway. Objective: In view of the facts presented, this article aims to review the literature on the changes of the upper airway in patients’ class III undergoing orthognathic surgery. Methodology: International Literature on Health Sciences (Pubmed ) and Port Journals CAPES original and review published between 1990 and 2010, in two bibliographic databases articles were selected. Results: thirty-nine (39) articles were selected for writing this review. Conclusion: The upper airway deformity and dental- skeletal class III should be carefully evaluated prior to orthognathic surgery and whenever surgical planning permit should prefer the maxillary advances to mandibular setbacks
Resumo:
The mandibular and maxillary canines when well positioned in the arch, are important functionally and aesthetically. Although these teeth are frequently malpositioned in the dental arch, their absence of eruption are not common, occuring more frequently with the maxillary canine than the mandibular canine. The canine transmigration is a well-known pre eruptive phenomenon in which the tooth goes thru the facial midline, occurring more frequently in the mandible than in maxila. Females are more susceptible than males and the right side more than the left one. Normally the patients do not show any symptoms, and this condition is observed during radiographic exams to diagnose the late exfoliation of the deciduous canine or for any other purpose. Due to the relationship between impacted canines and pathologic lesions, infection, trauma to the adjacent teeth, pain, ectopic eruption and interference with prosthesis, it´s indicated the surgical extraction of these teeth. The goal of this article is to describe and discuss the surgical treatment of an impacted canine (43) in the chin.
Resumo:
Objective: The purpose of this study was to evaluate the effects of the platelet-rich plasma (PRP) when used in combination with autogenous bone graft and bioabsorbable membrane (Resolut® ) in the treatment of Class III furcation defects in dogs. Material and method: Class III furcation defects (5 mm in height and in depth) were surgically created in the mandibular third premolars of five mongrel dogs. After nine weeks, the lesions were treated with scaling and root planning and each defect received one of the following treatments: autogenous bone graft + membrane (group C) or PRP + autogenous bone graft + membrane (group T). After a healing period of 90 days, the animals were sacrificed. Routine histological processing and staining with hematoxilyn and eosin and Masson trichrome were performed and a histomorphometric analysis determined the effect of the treatments on periodontal tissue regereneration. Data were analyzed by Hotelling’s T-squared (p < 0.05). Result: No statistically significant difference between C and T groups was observed by the histomorphometric analysis of the furcation area. Both treatment groups demonstrated similar regenerative results with the furcation defects partially filled and periodontal regeneration limited to the experimental notches of the lesions. (p > 0.05). Conclusion: According to the present results, PRP does not enhance the periodontal regeneration in class III furcation defects treated with autogenous bone graft and bioabsorbable membrane.
Resumo:
Introduction: The radiographic characteristics of a biomaterial, such as its density, may influence the evaluation of the results obtained following its clinical use. Objective: The aim of this study was to evaluate the radiographic density of biomaterials used as bone substitutes, inserted into dental sockets and bone defects in created in the jaws of pigs. The influence of a soft tissue simulator on the results was also evaluated. Material and method: Two and three-millimeter-deep bone defects were created in the pigs mandible and the right first molar extraction socket were used. Commercial samples of five biomaterials were tested: Hydroxyapatite, Lyophilized Bovine Bone, 45S5 bioglass (generic), PerioGlass and β-Tri-Calcium Phosphate, and compared to a positive (mandibular bone) and negative (empty alveolar bone defects) controls. Radiographic images were acquired with and without a 10 mm thick soft-tissue simulator. Result: The results for the extraction sockets showed no differences between the biomaterials and the negative control. For the bone defects, the depth of the defect density influenced the density, both in the negative control (p < 0.01) and biomaterials (p < 0.05) groups. The soft- tissue simulator did not alter the results. Conclusion: The type of the evaluated defect can interfere in the radiographic features presented by each biomaterial, while the simulation of soft tissues was not statistically significant.
Resumo:
The early tooth loss and periodontal disease often leave inadequate bone volume for installation of osseointegrated implants. The autogenous bone graft is considered the gold standard for reconstruction of residual bone defects. Some surgical techniques can be performed, including extra or intraoral donor sites depending on the degree of bone loss, depending on surgical-prosthetic planning and general condition of the patient. The intraoral bone grafts offer a safe option to rebuilt bone volume in smaller rehabilitations, with low morbidity and minimal postoperative discomfort. Among the possible donor sites, the mandibular ramus and body, which offer predominantly cortical bone, and the chin area, which offers corticomedullary bone tissue, can be harvested. The graft will be suitable both in quantity and quality, preserving the capacity of osteogenesis, osteoinduction and osteoconduction, which differentiate autogenous grafts from other biomaterials. The aim of this study was to report a clinical case in which the mandibular ramus graft was used for total reconstruction of an edentulous maxilla, showing that even large areas can be reconstructed with grafts from intraoral origin. All the steps that allowed the complete reconstruction of the maxilla done by an intraoral donor area are listed in the text, culminating in an extremely satisfactory clinical result.
Resumo:
Objective: this study aimed to present the causes and prevalence of maxillofacial fractures that occurred in the region of Araraquara-SP – Brazil, during a 6-year period. Methods: information regarding age, gender, etiology, and maxillofacial fracture site, as well as type of radiographic examination were evaluated. Data were gathered from the radiographic examination and radiographic report of the Division of Dentomaxillofacial Radiology, and from charts of the Division of Oral and Maxillofacial Surgery of patients attending for maxillofacial fractures from 2004 to 2009. A descriptive statistical analysis was developed using Epi-Info 3.5.1. Results: from a total of 11,728 patients assisted, 407 patients presented maxillofacial fractures. The prevalent age ranged from 21 to 30 years old. From the total patients, 322 were men and 85 were women (ratio of men to women was 3.8:1). Panoramic radiography (n = 306) was most frequently used to observe maxillofacial fractures. Mandibular fractures were frequent in the body of the mandible (n = 127), followed by symphysis (n = 102), and the prevalent cause was traffic accidents (n = 161). Conclusion: more than half of affected individuals were younger than 40 years of age. The body of the mandible was the most common fracture location visualized by panoramic radiography for traffic accidents and fights.
Resumo:
Odontogenic cysts are considered as nonneoplasic benign lesions. Among the cysts, keratocyst odontogenic tumor (KCOT) is an intra‑osseous tumor characterized by parakeratinized stratified squamous epithelium and a potential for aggressive, infiltrative behavior, and for the possibility to develop carcinomas in the lesion wall. Thus, the aim of this study was to describe a clinical case of KCOT in a young patient and discuss the treatment alternatives to solve this case. A 15‑year‑old male was referred for treatment of a giant lesion in his left side of the mandible. After the biopsy, a diagnostic of KCOT was made, and the following procedures were planned for KCOT treatment. Marsupialization was performed for lesion decompression and consequent lesion size reduction. Afterward, enucleation for complete KCOT removal was performed followed by third mandibular molar extraction. After 5 years, no signs of recurrence were observed. The treatment proposed was efficient in removing the KCOT with minimal surgical morbidity and optimal healing process, and the first and second mandibular molars were preserved with pulp vitality. In conclusion, this treatment protocol was an effective and conservative approach for the management of the KCOT, enabling the reduction of the initial lesion, the preservation of anatomical structures and teeth, allowing quicker return to function. No signs of recurrence after 5 years were observed.