An effective technique to posterior resin composite restorations

AIM: The aim of this study is to present a clinical case in which an occlusal matrix device was used in a patient who needed to restore a posterior tooth. MATERIAL AND METHODS: A direct duplicate occlusal appliance was used (biteperf) in a patient who needed an occlusal restoration in two posterior teeth. RESULTS: Using the matrix helps having fast and accurate reproduction of the original anatomical details of the occlusal surface. The final result surprised with the presented restoration in terms of esthetic quality, despite the simplicity of the technique. CONCLUSION: Posterior teeth with initial lesions were confined to the occlusal surface of anatomically complex or fissured anatomy with or without signs of proximal caries wich are ideal candidates for this technique. The overlying enamel surface must be relatively intact; lesions of hidden or occult caries. CLINICAL SIGNIFICANCE: The aesthetic and time-saving benefits of the occlusal device (biteperf) are immediately clear. The matrix allows the fast and accurate reproduction of the anatomic details of the original occlusal surface of the tooth. The professionals who lack an artistic penchant and marked manual ability will be able to carry out excellent posterior resin composite restorations.

Association between bruxism, alcohol and tobaco use among brazilian students

The etiology of bruxism is not well defined. Different factors affecting the central nervous system are considered as risk factors for bruxism. Dental students are not immune to the bruxism, alcohol consumption and tobacco use, despite their training, knowledge of its effects and social responsibility. The purpose of this study was to evaluate the association between bruxism, alcohol consumption and tobacco use among Brazilian dental students. Participants were chosen among 180, 17-29 year-old students at the UNESP’s Dentistry School – Araçatuba Campus. They were divided into those with and without bruxism on the basis at validated clinical criteria. The clinical examinations were carried out by four standardized examiners (Intraexaminer and Interexaminer Unweighted kappa= 0.82, Weighted kappa= 0.89, respectively), in the clinic, with daylight and a tongue depressor. Bruxism was registered with the following categories: no wear facets, wear facets in enamel, dentine wear facets, facets wear half of the crown and wear facets more than 2/3 of the tooth crown. A self report validated questionnaire for alcohol consumption and tobacco use with 29 questions was completed by both groups. Fischer exact test and T-test were used and Odds Ratio and Confidence Interval was estimated. Bruxism was more frequent among cigarette smokers both in men (68.4%) and in women (56.8%). Among all respondents in this group, 82.6% reported that they would like to quit smoking and those who have tried previously to quit (76.4%) found it made them more stressed. Drinker was more frequent in the group with bruxism also (66.5% of the female and 73.5% of the male). 88.4% reported drinking alcohol because it “allows dealing with stress in an adequate way”. Results suggest a positive association between bruxism and alcohol consumption and tobacco use.

Case report: Cornelia de Lange Syndrome (CDLS)

The Cornélia of Lange´s syndrome is a genetic anomaly, described and published by Cornelia Catharina of Lange in 1933, however, their aspects were described previously by Winfried Robert Clemens Brechmann in 1916, that’s why it is also known as Brachmann of Lange’s syndrome. The most frequent clinical characteristics include typical face dismorfia, variable degree of mental delay, anomalies of the hands and feet, multiple malformations, retardation of the pre and postnatal physical development and microcephaly variable intellectual compromising. Some facial characteristics are peculiar and they are mixed with the inherited lines of their own family, the united brows, the long lashes, the small nose, the round face, the fine lips and lightly inverted. As oral manifestations they present micrognathia, dental crowding, periodontal disease, delayed dental eruption, enamel hypoplasia, erosion of the enamel and dentine caused by stomach acids of the gastroesophageal reflux and atresia of the dental arches. The purpose of this paper is to present a clinical report of a boy bearer of this syndrome assisted at CAOE - FOA - UNESP, emphasizing the importance of multiprofessional team for the diagnosis and treatment of this syndrome.

Odontoma em pacientes odontopediátrico: diagnóstico e tratamento. Relato de caso clínico.

Odontoma is a term that refers to a benign tumor of odontogenic and mixed nature, composed of epithelial and mesenchymal components. Histologically, they are compounds of different configurations including dental enamel, dentin, cementum and in some cases the pulp tissue. A slow growing asymptomatic tumor, odontoma is usually discovered through routine radiographic examination. A 3-year old male patient sought care at the School of Dentistry’s Baby Clinic (UNESP-Araçatuba), complaining of “small ball close to the teeth.” During the interview, the mother reported that the lesion was observed soon after a trauma, and evolved in less than one month. An ulcerated lesion with a 0.8 cm diameter was found during intraoral clinical examination. It was located in the inferior and anterior region of the mouth, between teeth 81 and 82, and there was also crown distalization. A radiographic examination showed a radiolucent area and root distance. In the absence of clinical and radiographic characteristics suggesting a case of odontoma, the differential diagnosis was peripheral giant cell lesion and pyogenic granuloma. So the area was punctured. Nonetheless, due to the absence of liquid, the surgical removal of the lesion was performed, followed by histological examination, which showed the definite diagnosis of a suggestive case of emerging odontoma.

Protective efficacy of psidium cattleianum (Sabine) and myracrodruon urundeuva (Allemao) leaf extracts against caries development in rats

This study evaluated the influence of Psidium cattleianum Sabine (Myrtaceae) and Myracrodruon urundeuva Allemão (Anacardiaceae) aqueous extracts on S. mutans counts and dental enamel micro-hardness of rats submitted to a cariogenic challenge. Sixty Wistar rats were distributed in three groups and received water (control) or aqueous extracts of Psidium cattleianum or Myracrodruon urundeuva as hydration solution. Initially the animals had their sublingual and submandibular salivary glands surgically removed and the parotid ducts ligated. Then the rats were inoculated with 106 CFU of Streptococcus mutans ATCC 35668 and were fed with a cariogenic diet. To detect and quantify the presence of S. mutans, oral biofilms were sampled and microbial DNA was extracted and submitted to amplification by means of real-time PCR (Polymerase Chain Reaction). After seven weeks the animals were sacrificed and enamel demineralization was analyzed by cross-sectional micro-hardness. Both extracts produced a significant reduction on S. mutans counts and decreased the enamel demineralization. It can be concluded that the extracts tested had a significant effect on S. mutans in oral biofilm of the rats, decreasing S. mutans accumulation and enamel demineralization.

Avaliação da termociclagem sobre a estabilidade de cor de diferentes matizes de resina composta

The objective was to evaluate the effect of thermocycling on the color variation of three different composite resins . We studied was Resin Enamel on 3 levels : ( Esthetic X , Opallis and Venus ) ; Resin Dentin in three levels : ( Esthetic X , Opallis and Venus ) and Thermocycling on level 1 : ( 3,000 cycles ) ; variable was the change of color gauged by spectrophotometry . 60 specimens , subdivided into 6 groups were made : GI - Esthetic X Enamel ; GII - Esthetic X dentin ; GIII - Opallis Enamel ; GIV - Opallis dentin ; GV - Enamel and GVI Venus - Venus dentin . The specimens were prepared with a matrix to standardize samples . The inserts of incrementally resins and polymerized with a halogen light Ultralux unit ( Dabi Atlante , Brazil ) with a power of 450mW / cm ² . After fabrication , underwent color reading with a UV Visible Spectrophotometer reflection , UV -2450 ( Shimadzu , Kyoto , Japan ) , with the changes calculated by the system CIE L * a * b * . Then isolates were stored in artificial saliva at 35 ° C ± 2 ° C during 3 months containers being subjected to the effects of thermal cycling for 3000 cycles over the range of 5C to 55C . Again subjected to chromatic evaluation. For the analysis of the results of color change of the studied resins was applied ANOVA two factors at 5 % . The results showed a statistically equal resins enamel GI and GV ( p = 0.79 ) ; the same was not observed for GI and G III resins , where the color change was higher for resin G III ( p = 0.0000002 ) . The same was observed between G III and GV , where the resin enamel G III showed a statistically superior to the color change ( p = 0.0000005 ) Average . Resins to dentin was there a statistical equality between the materials studied . We conclude that the resins studied change in color and resin enamel G III was the most suffered major color changes after aging by thermocycling .

Clinical evaluation of a composite resin and a resin-modified glass-ionomer cement in non -carious cervical lesions: one year result

Objectives: The objective of this study was to evaluate the clinical performance of 124 non-carious cervical lesion restorations at 12 months. Materials And Methods: Three study groups were formed according to the material and technique used. All teeth received 37% phosphoric acid etching in enamel and dentin. The teeth of Group I received the conventional adhesive system Scotch Bond Multi Purpose, followed by resin composite Filtek Z350; teeth of Group II were restored with resin-modified glass-ionomer cement Fuji II LC; teeth of Group III were restored with the same resin-modified glass-ionomer cement however, before it was inserted, 2 coats of primer of the Scotch Bond Multi Purpose adhesive system were applied to dentinal tissue. The teeth were evaluated by 2 examiners with regard to the factors of retention, marginal adaptation, marginal discoloration, color alteration, presence of marginal caries lesion, anatomic shape, and sensitivity. Results: Application of the Kruskal-Wallis test showed no statistically significant difference for anatomic shape, marginal discoloration, color alteration, caries lesion, marginal adaptation, and sensitivity among the three study groups, but the variable retention presented statistically significant difference at 12 months, with Group III presenting a behavior superior to that of Group II but similar to that of Group I. Conclusion: The analyzed restorations of non-carious cervical lesions presented a good clinical performance at 12 months.

Different esthetic techniques used in combination to improve the smile

This is a clinical case report of a patient who presented with dental stains in the buccal and proximal aspects of the anterior teeth. Buccal stains were removed using the enamel microabrasion technique, and vital tooth bleaching with carbamide peroxide was also performed. Restorative procedures employing composite resin were done for a better result in the proximal aspect of teeth. Clinical significance: The authors observed the combination of these esthetic techniques improved the patient's smile. Today, dental esthetics attempts to imitate natural teeth by making them white, well-shaped, and aligned with no spots. This has enabled the development of several esthetic techniques, such as microabrasion to remove dental enamel surface stains and surface irregularities,1-6 and vital tooth bleaching to treat yellowish teeth.7 The enamel microabrasion technique uses different abrasive agents associated with chemical solutions,1,2,4,6 allowing the removal of intrinsic, hard-texture stains, and different coloring spots on the enamel surface, as well as correction of irregularities on the dental buccal surface.1,8 The various microabrasive products include the Opalustre® (Ultradent Products, http://www.ultradent.com)or Prema® Compound (Premier Dental Products, http://www.premusa.com), a low-concentration hydrochloric acid product associated with silica microparticles that is certainly effective for microabrasion technique,4,6,9,10 providing a good safety profile for the patient and professional. The microabrasion technique also promotes micro-reduction on the adamantine surface.4,5,10 In some cases, after its completion, microabrasion may cause teeth to become darker or yellowish because of the thinner remaining enamel surface, leading to more evident observation of the dentinal tissue, which in general determines tooth color. In these clinical conditions, correction of the color pattern of dental elements can be obtained with carbamide peroxide products applied in custom trays, such as the bleaching products Whiteness Perfect at 10% or 16% (FGM Productos Odontologicos, http://www.fgm.ind.br) or Opalescence® at 10% or 15% (Ultradent Products), with a considerable margin of clinical success, provided it is well indicated, well performed, and supervised by the professional.4,6,9,10 Considering all the aforementioned aspects, the authors present a clinical case about a dental-enamel microabrasion technique used to remove buccal enamel surface stains associated with dental vital bleaching and restorative procedures in the proximal aspect of anterior teeth. - See more at: https://www.dentalaegis.com/cced/2010/08/different-esthetic-techniques-used-in-combination-to-recover-the-smile#sthash.McFoH7El.dpuf

Influência da clareação sobre a polpa dentária

Tooth bleaching is the most common treatment and more conservative to get a smile with white teeth. However, the tooth sensitivity has been a major adverse effects caused by this treatment, which raises questions about the effect of bleaching the pulp. Therefore, we performed a literature review in order to study the relationship between bleaching agents and their possible effects on the dental pulp. We review various articles showing that the peroxide compound used to whiten teeth, penetrates through enamel and dentin until the pulp chamber causing changes of variable intensity or induce pulp necrosis. Moreover, we found that the higher the concentration of peroxide in the bleaching agent, and the greater the contact time with this dental structure, the greater the damage caused in the pulp. Although several studies show that the bleaching agent hydrogen peroxide-based pulp can make changes, there are still many gaps to be filled.

Resistência de união e estabilidade de um sistema adesivo universal à dentina erodida/abrasionada após desproteinização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da incorporação do trimetafosfato de sódio microparticulado e nanoparticulado ao cimento de ionômero de vidro nas propriedades físico-mecânicas e na desmineralização do esmalte

Pós-graduação em Ciência Odontólogica - FOA

Efeito da adição de nanopartículas de hexametafosfato de sódio em dentifrícios fluoretados sobre a desmineralização dentária: estudo in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ação de enxaguatórios clareadores e sua associação ao clareamento caseiro com peróxido de carbamida

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Papel de cepas de Streptococcus mutans e Bifidobacterium spp. na etiologia ou proteção contra doenças bucais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da resistência de união da resina composta ao esmalte desmineralizado submetido à remineralização e infiltração resinosa de lesão de cárie

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)