Análise da influência do torque de montagem na resistência de parafusos de fixação

Whereas the assembly torque calculation has great importance on efficiency and life of bolts, the objective of this study was to analyze the combined stresses during assembly, the friction coefficient, compare the rupture torque results with the indicated torques by standards and to present a new torque method without the stress combination (shear stress and normal stresses). For this study were carried eighteen tests with different diameters and materials, this bolts were undergoing five ranges torque until the breaking torque. With the experimental rupture torque values for each test and with the bolt quality certificate was possible to calculate the friction coefficient so compared with the theory. Another comparison was the experimental rupture torque with assembly torque indicated by NBR-8800 and ASME-PCC. The main conclusion are related to combined stress, because for this factor can fail at the assembly time, so for in some cases must use the tensioning method, because in this method won't be present torsional stresses

Avaliação da citotoxicidade, genotoxicidade e mutagenicidade de lentes de contato à base de celulose bacteriana com adição de complexos fármacos-ciclodextrinas

Nos últimos anos, a biotecnologia tem proporcionado avanços no desenvolvimento de biomateriais a serem utilizados como dispositivos médicos. Dentre esses dispositivos, podemos destacar aqueles que promovem a reparação tecidual e, também, a liberação controlada de fármacos. Partindo deste propósito, lentes de contato à base de celulose bacteriana (CB) foram desenvolvidas, visando o efeito curativo e reparativo para doenças da superfície ocular. A adição de ciclodextrinas (CDs) e fármacos, como o ciprofloxacino (CP) e o diclofenaco de sódio (DS) á essas lentes proporcionando propriedades terapêuticas e de liberação controlada dos fármacos. No entanto, para certificar-se do uso seguro desses compósitos pela indústria de dispositivos médicos, é necessário verificar se não possuem atividade citotóxica, genotóxica e/ou mutagênica. Sendo assim, a proposta do presente trabalho foi o desenvolvimento de uma adição eficaz de fármacos às lentes de contato de CB, para que sejam liberados de maneira controlada e, também, a verificação de sua biossegurança. Para essa verificação foram realizados ensaios in vitro de citotoxicidade (ensaio com o kit XTT e Sobrevivência Clonogênica), genotoxicidade (ensaio Cometa) e mutagenicidade (teste do Micronúcleo) com os respectivos. Após a análise estatística dos resultados foi possível verificar que o material CB-CP apresentou efeito citotóxico e os materiais CB-DS e CB-CD-DS apresentaram efeito citotóxico, genotóxico e mutagênico. Essa informação é fundamental para uma futura utilização segura desse biomaterial pela indústria de dispositivos médicos ...

Resistência à privação de água em pequenos roedores

Não disponível

Caracterização da resistência à ivermectina de um isolado de Haemonchus contortus em ovinos: se tiver subtitulo

The production of sheep, both in Brazil and worldwide, has shown significant growth in the last years but still has some obstacles to its development, among them are the low indexes caused by parasites, with emphasis on haemoncose. Among the control methods used in the fight against worms are the anthelmintics, and one of the most active principles in this traditional treatment is ivermectin. While being the tool of choice in the treatment of parasitic diseases, improper use of the same led to the emergence of resistant isolates, not only to ivermectin, as several other active principles of antiparasitic drugs

Avaliação do tempo e da concentração do condicionamento com ácido fluorídrico sobre a resistência de união entre cerâmica e cimento resinoso

The aim of this study was to verify through microtensile test the influence of time and concentration of surface conditioning with hydrofluoric acid and its interference in the adhesion of dual resin cement to porcelain.We used 32 bodies of glass-ceramic lithium disilicate system IPS e.max Press LT with dimensions of 6mm thick, 8 mm in length and 8 mm in length, which will be molded to obtain composite resin blocks corresponding to blocks ceramics. Ceramic and resin blocks were divided into 16 groups (n = 4) and numbered according to the concentration of hydrofluoric acid (2.5%, 5%, 7.5% and 10%) and conditioning time (20 seconds, 40 seconds, 1 minute and 2 minutes). The blocks were cleaned in ultrasonic apparatus with distilled water and dried with compressed air, subjected to acid etching and air-jet washed with water, dried with compressed air and received application of silane agent Monobond-S, followed by adhesive Excite ( Ivoclar Vivaden). Each ceramic block was bonded to the corresponding block of resin through the resin cement Multilink Automix. The specimens were cut to obtain nine micro samples for each set of ceramic-resin with 1 mm X 1 mm X 12 mm in length, which were submitted to microtensile test. The results were analyzed with descriptive statistics and analysis of variance with significance level of 5%, revealing that there were statistically significant (p = 0.000001 <0.05). From the Tukey test can be concluded that etching with hydrofluoric acid and 2.5% for 120 seconds gave the best bond strength, however, no statistical difference between the conditioning with the same acid in the concentration of 5.0% for 20 to 40 seconds

Butoh e a educação: o corpo como mídia mínima e a metáfora da resistência : entre o peso da gravidade e o da sociedade há sempre um buraco por onde a vida escapa

Com base numa experiência pessoal com a dança e leituras sobre butoh, o trabalho traça um paralelo entre o corpo na dança butoh e o corpo na educação, pensando como o corpo do educando é cerceado a ponto de não conseguir criar possibilidades de liberdade e resultando por isso numa indisciplina como grito de socorro. O primeiro meio de comunicação é o corpo, é nossa mídia mínima e é o primeiro a ser domesticado na escola e na sociedade. O trabalho busca caminhos pelo labirinto procurando como esse corpo poderia encontrar manifestações expressivas no meio da pressão e prisão em que é inserido na sociedade e, consequentemente, na escola, mostrando como exemplo os caminhos que o butoh criou como forma de resistência. Com apoio de Christine Greiner e Maura Baiocchi, procura decifrar como os dançarinos de butoh se manifestam contra esse meio opressor que impôs ao Japão uma cultura ocidental indo contra, rotulando e desrespeitando as nuances da cultura japonesa. Exercitando um butoh com as palavras, Clarice Lispector serve de inspiração à pesquisa, dando pinceladas que mostram quão profundo pode ser um movimento artístico quando se tem o corpo intenso e inteiro na criação, como ela tem. No trabalho, a autora revela o sonho de uma educação onde o corpo vivesse toda a experiência intensamente, recebendo suas marcas como um presente e não como uma cicatriz que dói. Com a ajuda do butoh, sonha uma escola que deixaria marcas a servirem como pistas para a criança encontrar seu próprio corpo

Influência do uso de hipoclorito de sódio 2,5% e extrato glicólico de sálvia 20% durante o preparo biomecânico sobre a resistência adesiva de retentores intra- radiculares: avaliação através do teste de push-out

The aim of this study it was to evaluate the use of irrigating solution used during root canal preparation on the adhesive cementation of prefabricated fiberglass pins. The bond strength between different regions of the root and the fiberglass pins cemented into the root canal were evaluated by push-out assay. For this study, 36 human teeth were used, all equally prepared. The irrigating solutions used for biomechanical preparation were: saline solution, sodium hypochlorite 2,5% and glycolic extract of salvia 20%. The dual cure resin cement was used for cementation of pins. After cementation, specimens were sectioned to give 3 slices of approximately 2 mm each (cervical, middle and apical), which were submitted to mechanical push-out test. Were performed ANOVA and Tukey's test with a significance level of 5%, for the analysis of mechanical test. Comparing the thirds we observed that the only solution that presented statistical difference in the bond strength was sodium hypochlorite, which showed higher values for the middle and apical third compared with the cervical third, but when compared without taking into consideration the dental thirds, solutions studied showed no differences in bond strength. Therefore, it was concluded that the solutions studied can be used during endodontic treatment without causing harmful effects on the final adhesive restoration

Efeito do treinamento de saltos em mini-trampolim na resistência de força e na aptidão aeróbia em mulheres treinadas

Este estudo teve como objetivo analisar o efeito de um período de treinamento com uma aula coreografada na resistência de força de membros inferiores e na aptidão aeróbia em mulheres. Participaram do estudo, 11 mulheres ativas (Idade = 31,8  8,04 anos, Massa corporal = 60,5  6,49 kg e Estatura = 160,7  4,35cm). Foram realizados antes e após o período de treinamento os seguintes procedimentos: 1) Teste progressivo de Bruce, para a estimativa do consumo máximo de oxigênio (VO2max); 2) Teste de repetições máximas, para estimar a resistência de força (RF) e; 3) Aula coreografada. O treinamento foi realizado em um período de 6 semanas, com frequência semanal de 2 sessões. Houve um aumento significante na RF (de 30,4 3,98 para 37,2 6,25) e no VO2max (de 28,2 6,25 para 34,3 6,24 ml/kg/min) após o período de treinamento. Portanto, um período de treinamento composto por aulas coreografadas envolvendo saltos e um alto número de repetições proporciona uma melhora na resistência de força de membros inferiores e na aptidão aeróbia e mulheres ativas

Determinação dos tipos de resistência de genótipos de soja ao ataque de Spodoptera cosmioides (Walker, 1858) (Lepdoptera: Noctuidae)

The aim of this work was to evaluate the types of resistance of soybean genotypes to the attack of Spodoptera cosmioides (Walker, 1858), under laboratory conditions. Plants of the soybean genotypes, IAC 100, Dowling, PI 227687, PI 274454, BR 16, IGRA RA 626 RR, PI 227682, BRSGO 8360, IGRA RA 516 RR e P 98Y11 RR, were cultivated in vases and placed in a greenhouse in order to have their leaves used afterwards in free-choice and no-choice no-preference for feeding tests and evaluation of the biological parameters of S. cosmioides fed on the genotypes. For free-choice no preference for feeding test, 10 leaf discs were prepared and placed in Petri dishes equidistantly among themselves, and then two recently-hatched caterpillar per genotype were release in the center of the plate. The same test was performed for third instar larvae, so that one caterpillar per genotype was used. In non-choice test, only one genotype was used in each Petri dish, where two recently-hatched or one third instar caterpillars were released, respectively. For both tests, the attractiveness was assessed at 1, 3, 5, 10, 15, 30, 60, 120, 360, 720 and 1440 minutes after the release of the insects. In addition, the leaf area consumed was evaluated. Randomized blocks design and completely randomized design were used for free-choice and non-choice tests, respectively, with 10 replications. In biology test, recently-hatched larvae were transferred to Petri dishes with leaves of the genotypes, evaluating the period of larvae, pupae and overall (larvae + pupae), viability of larvae, pupae and overall, weight of 12 days-old larvae and 24 hours-old pupae and longevity of the adults. Completely randomized design was used for this test, with 30 replications. Genotypes IGRA RA 516 RR and IGRA RA 626 RR were the least and the most consumed by recently-hatched larvae of S. cosmioides, respectively, in non-choice non-preference for feeding test. Genotypes PI 274454 and PI 227687 were...

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

Redução bacteriana via terapia fotodinâmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Processamento do compósito de fibra de capim-sapê / epóxi e avaliação da resistência à flexão “t” de Student

In recent years a great worldwide interest has arisen for the development of new technologies that enable the use of products with less environmental impact. The replacement of synthetic fiber plants is a possibility very important because this fiber is renewable, biodegradable and few cost and cause less environmental impact. Given the above, this work proposes to develop polymeric composites of epoxy resin and study the behavior of these materials. Both, the epoxy resin used as matrix in the manufacture of sapegrass fiber composite, as tree composites formed by: epoxy/unidirectional sapegrass long fiber, 75% epoxy/25% short fiber, by volume, and 80% epoxy/20% short fiber, by volume, were characterized by bending, and the composites produced with short fibers random were inspected by Optical Microscopy and Acoustics Inspection (C-Scan). For the analysis of the sapegrass fiber morphology, composites 75% epoxy/25% short fiber (sheet chopped) and 80% epoxy/20% short fiber images were obtained by optical microscope and the adhesion between polymer/fiber was visualized. As results, the flexural strength of composites epoxy/unidirectional long fibers, 75% epoxy/25% short fiber and 80% epoxy/20% short fiber were 70.36 MPa, 21.26 MPa, 25.07 MPa, respectively. Being that composite showed that the best results was made up of long fibers, because it had a value of higher flexural strength than other composites analyzed

Estudo do efeito da classe de furação na resistência à fadiga em junta alumínio – fibra de carbono

This work performs a comparative study of fatigue life of riveted lap joints involving classes of drilling which adjustment is made with interference or clearance. For this study, representative specimens of this joints were manufactured with four rivets distributed in two rows. In this context, are presented the test matrix, the methodology employed in performing of the tests, the used mathematical modeling, and that methods that are the basis for the latter are described through the theoretical foundation. Next, are present the results obtained in fatigue tests and images of the region of failure of the specimens. Finally, are present some comments and conclusions related to the results obtained

Infecção bacteriana da cavidade amniótica em gestantes com trabalho de parto prematuro

O trabalho de parto prematuro (TPP) é uma intercorrência obstétrica com etiologia multifatorial, que tem como principal complicação a prematuridade. A infecção da cavidade amniótica (CA) é um fator associado ao TPP e, nos últimos anos, trabalhos têm demonstrado a presença de diferentes espécies bacterianas no líquido amniótico (LA) de pacientes em TPP. O objetivo desse estudo foi identificar as espécies bacterianas presentes no líquido amniótico de gestantes em trabalho de parto prematuro. Foram incluídas, no grupo de estudo, 20 gestantes em TPP e como grupo controle, 20 gestantes, fora de trabalho de parto prematuro, com indicação para amniocentese transabdominal para avaliação da maturidade fetal. As pacientes foram atendidas no Serviço de Obstetrícia do Hospital das Clínicas da Faculdade de Medicina de Botucatu, no período de junho de 2005 a outubro de 2007. Para avaliação da presença de infecção na CA, foi realizada a reação em cadeia da polimerase (PCR) em amostras de líquido amniótico para detecção de Mycoplasma hominis, de Ureaplasma urealyticum e da seqüência conservada inter-espécie do gene RNAr 16S. Os produtos da reação de PCR para o gene RNAr 16S foram clonados para realização do seqüenciamento com a finalidade de identificar as espécies bacterianas da CA das gestantes incluídas no estudo. A incidência de TPP no período do estudo foi de 5,8%. No grupo TPP, a pesquisa de invasão microbiana da CA foi positiva para M. hominis (35,0%), U. urealyticum (15,0%) e gene RNAr 16S (30,0%), sendo todas as frequências superiores às encontradas no grupo controle (p<0,05). A pesquisa de microrganismos no LA através da pesquisa do gene bacteriano RNAr 16S revelou positividade de seis amostras de LA pertencente...(Resumo completo, clicar acesso eletrônico abaixo)

Comparação das técnicas semi-quantitativa e quantitativa nas infecções relacionadas a cateter em neonatos e determinação da resistência à oxacilina nos Staphylococcus spp

Study the semi-quantitative and quantitative technique in the diagnosis of catheter-related infections in newborns and to determine oxacillin resistance in Staphylococcus isolated. It was analyzed 353 catheter tips from 273 newborns in the Neonatal Unit of Hospital FMB. To confirm the diagnosis of infection, were analyzed the clinical data of newborns, the presence of at least one positive blood culture and growth of ≥ 1000 CFU/mL on quantitative culture and/or ³15 UFC on semiquantitative culture, with the same microorganism isolation (species and drug sensitivity) in blood culture and no other focus of infection except the catheter. The disk diffusion technique was used to check similarity of strains and resistance to oxacillin. Of the 353 tips analyzed, 39 were included in this study as the inclusion criteria. The semiquantitative culture was positive in 26 (66.7%) catheters and quantitative culture was positive in 24 (61.5%). Of 273 patients, 19 (6.9%) had a diagnosis of catheter-related bloodstream Infection (CR-BSI). Of the 19 episodes of CR-BSI, S. epidermidis was the predominant etiological agent (84.2%). The resistance to the antibiotic methicillin was found in 14 (73.7%) strains of Staphylococcus. The semiquantitative method was more sensitive (79%) compared with the quantitative method (63%). The use of antibiotics may have influenced the sensitivity of the quantitative method as the microorganisms present in the lumen are exposed to higher concentrations of antibiotics administered via the catheter